View: Mechanical v185

STLs exported from v185 of the F360 model. This is still not recommended for general use (and these particular designs have not been tested at all yet), but this release is provided if you'd like to be on the bleeding edge and try building one. It may not work correctly. You have been warned.

In general, tolerances are very tight as the model was designed for a high-resolution 3d print, such as MJF, SLS, or SLA. I was happy with how MJF prints from JLCPCB turned out, and very reasonably priced. (disclaimer: I've paid for all prints up to this point myself, but in the interest of transparency, I have been in discussion with JLCPCB about future sponsorship opportunities, so please consider any potential bias I may have when you consider my recommendation)

Changes:

• Added alignment pins to back plate (requires Base PCB v0.3+) #7
• Increased vertical clearance between LCD in inside of knob by 0.5mm #4
• Added light baffle to MountBase to attempt to reduce LED light bleed inside knob #5
• Added small bumps to knob/spacer slots to hopefully retain the knob #6

NOTE: GitHub requires releases to be associated with a commit in the repo, but as the mechanical design is versioned independently (in Fusion 360 / Autodesk cloud), the source code and commit linked from this release are meaningless. Only the attached .STL files and .f3z file are relevant.

And a HUGE thank you to Prototype-tier sponsor @mindhashnl and all other sponsors for supporting this project!