Skip to content

seraphcoin/seraph

Repository files navigation

Commercial Photography

Features

  • Seraph Coin - Masternode
  • New PHI1612 PoW/MN algorithm thanks for 216k155
  • MN Reward

The seraph coin is a decentralized peer-to-peer banking financial platform, created under an open source license, featuring a built-in cryptocurrency, end-to-end encrypted messaging and decentralized marketplace. The decentralized network aims to provide anonymity and privacy for everyone through a simple user-friendly interface by taking care of all the advanced cryptography in the background.

Coin Specifications

Specification Value
Block Size 4MB
Block Time 120s
PoW Reward 50 SERA
Masternode Requirement 5,000 SERA
Port 25676
RPC Port 25674
Masternode Port 25676
Reward Method Teeter Totter Based Targeting System

*Instamine Protection: to prevent instamine, the first 500 blocks reward will be 2 SERA , from block 501 to 1500 block reward will be 3, and from block 1501-infinite , block reward will be 50. Expected time to reach block 1501: 48 hours

Build Seraph Wallet

Building for 64-bit Windows

The first step is to install the mingw-w64 cross-compilation tool chain. Due to different Ubuntu packages for each distribution and problems with the Xenial packages the steps for each are different.

Common steps to install mingw32 cross compiler tool chain:

sudo apt install g++-mingw-w64-x86-64

Ubuntu Xenial 16.04 and Windows Subsystem for Linux

sudo apt install software-properties-common
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu zesty universe"
sudo apt update
sudo apt upgrade
sudo update-alternatives --config x86_64-w64-mingw32-g++ # Set the default mingw32 g++ compiler option to posix.

Once the tool chain is installed the build steps are common:

Note that for WSL the seraph Core source path MUST be somewhere in the default mount file system, for example /usr/src/seraph, AND not under /mnt/d/. If this is not the case the dependency autoconf scripts will fail. This means you cannot use a directory that located directly on the host Windows file system to perform the build.

The next three steps are an example of how to acquire the source in an appropriate way.

cd /usr/src
sudo git clone https://github.com/seraphcoin/seraph.git
sudo chmod -R a+r+w seraph

Once the source code is ready the build steps are below.

PATH=$(echo "$PATH" | sed -e 's/:\/mnt.*//g') # strip out problematic Windows %PATH% imported var
cd depends
make HOST=x86_64-w64-mingw32 -j4
cd ..
./autogen.sh # not required when building from tarball
CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/config.site 
./configure --prefix=`pwd`/depends/x86_64-w64-mingw32 --disable-tests
make HOST=x86_64-w64-mingw32 -j4

Build on Ubuntu

sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev

# If you want to build the Qt GUI:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler

git clone https://github.com/seraphcoin/seraph.git --recursive

cd seraph

# Note autogen will prompt to install some more dependencies if needed
./autogen.sh
./configure 
make

Build on OSX

The commands in this guide should be executed in a Terminal application. The built-in one is located in /Applications/Utilities/Terminal.app.

Preparation

Install the OS X command line tools:

xcode-select --install

When the popup appears, click Install.

Then install Homebrew.

Dependencies

brew install cmake automake berkeley-db4 libtool boost --c++11 --without-single --without-static miniupnpc openssl pkg-config protobuf qt5 libevent imagemagick --with-librsvg

NOTE: Building with Qt4 is still supported, however, could result in a broken UI. Building with Qt5 is recommended.

Build Seraph Core

  1. Clone the seraph source code and cd into seraph

     git clone --recursive https://github.com/seraphcoin/seraph.git
     cd seraph
    
  2. Build Seraph Core:

    Configure and build the headless seraph binaries as well as the GUI (if Qt is found).

    You can disable the GUI build by passing --without-gui to configure.

    ./autogen.sh
    ./configure
    make
    
  3. It is recommended to build and run the unit tests:

    make check
    

Run

Then you can either run the command-line daemon using src/seraphd and src/seraph-cli, or you can run the Qt GUI using src/qt/seraph-qt

For in-depth description of Sparknet and how to use Seraph for interacting with contracts, please see sparknet-guide.

License

seraphcore is GPLv3 licensed.

Development Process

The master branch is regularly built and tested, but is not guaranteed to be completely stable. Tags are created regularly to indicate new official, stable release versions of Seraph.

The contribution workflow is described in CONTRIBUTING.md.

Testing

Testing and code review is the bottleneck for development; we get more pull requests than we can review and test on short notice. Please be patient and help out by testing other people's pull requests, and remember this is a security-critical project where any mistake might cost people lots of money.

Automated Testing

Developers are strongly encouraged to write unit tests for new code, and to submit new unit tests for old code. Unit tests can be compiled and run (assuming they weren't disabled in configure) with: make check. Further details on running and extending unit tests can be found in /src/test/README.md.

There are also regression and integration tests of the RPC interface, written in Python, that are run automatically on the build server. These tests can be run (if the test dependencies are installed) with: qa/pull-tester/rpc-tests.py

Manual Quality Assurance (QA) Testing

Changes should be tested by somebody other than the developer who wrote the code. This is especially important for large or high-risk changes. It is useful to add a test plan to the pull request description if testing the changes is not straightforward.