OF: MIPS: lantiq: implement OF support

Activate USE_OF, add a sample DTS file and convert the core soc code to OF.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3803/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -229,6 +229,7 @@ config LANTIQ
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select HAVE_CLK
+	select USE_OF
 
 config LASAT
 	bool "LASAT Networks platforms"

arch/mips/lantiq/Kconfig

@@ -18,4 +18,13 @@ config SOC_XWAY
 	select HW_HAS_PCI
 endchoice
 
+
+choice
+	prompt "Devicetree"
+
+config DT_EASY50712
+	bool "Easy50712"
+	depends on SOC_XWAY
+endchoice
+
 endif

arch/mips/lantiq/Makefile

@@ -4,7 +4,9 @@
 # under the terms of the GNU General Public License version 2 as published
 # by the Free Software Foundation.
 
-obj-y := irq.o setup.o clk.o prom.o
+obj-y := irq.o clk.o prom.o
+
+obj-y += dts/
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 

arch/mips/lantiq/dts/Makefile

@@ -0,0 +1,4 @@
+obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+	$(call if_changed,dtc)

arch/mips/lantiq/dts/danube.dtsi

@@ -0,0 +1,105 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,danube";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24Kc";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x120>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+		};
+
+		serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		pci0: pci@E105400 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+		};
+	};
+};

arch/mips/lantiq/dts/easy50712.dts

@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x400000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xway";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			phy-mode = "rmii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		stp0: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+			>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;		/* GNT1 */
+		};
+
+	};
+};

arch/mips/lantiq/prom.c

@@ -8,6 +8,7 @@
 
 #include <linux/export.h>
 #include <linux/clk.h>
+#include <linux/of_platform.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 
@@ -16,13 +17,15 @@
 #include "prom.h"
 #include "clk.h"
 
-static struct ltq_soc_info soc_info;
+/* access to the ebu needs to be locked between different drivers */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
 
-unsigned int ltq_get_cpu_ver(void)
-{
-	return soc_info.rev;
-}
-EXPORT_SYMBOL(ltq_get_cpu_ver);
+/*
+ * this struct is filled by the soc specific detection code and holds
+ * information about the specific soc type, revision and name
+ */
+static struct ltq_soc_info soc_info;
 
 unsigned int ltq_get_soc_type(void)
 {
@@ -57,16 +60,28 @@ static void __init prom_init_cmdline(void)
 	}
 }
 
-void __init prom_init(void)
+void __init plat_mem_setup(void)
 {
-	struct clk *clk;
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+
+	set_io_port_base((unsigned long) KSEG1);
+
+	/*
+	 * Load the builtin devicetree. This causes the chosen node to be
+	 * parsed resulting in our memory appearing
+	 */
+	__dt_setup_arch(&__dtb_start);
+}
 
+void __init prom_init(void)
+{
+	/* call the soc specific detetcion code and get it to fill soc_info */
 	ltq_soc_detect(&soc_info);
-	clk_init();
-	clk = clk_get(0, "cpu");
-	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
-		soc_info.name, soc_info.rev);
-	clk_put(clk);
+	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
+		soc_info.name, soc_info.rev_type);
 	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
 	pr_info("SoC: %s\n", soc_info.sys_type);
 	prom_init_cmdline();
@@ -76,3 +91,19 @@ void __init prom_init(void)
 		panic("failed to register_vsmp_smp_ops()");
 #endif
 }
+
+int __init plat_of_setup(void)
+{
+	static struct of_device_id of_ids[3];
+
+	if (!of_have_populated_dt())
+		panic("device tree not present");
+
+	strncpy(of_ids[0].compatible, soc_info.compatible,
+		sizeof(of_ids[0].compatible));
+	strncpy(of_ids[1].compatible, "simple-bus",
+		sizeof(of_ids[1].compatible));
+	return of_platform_bus_probe(NULL, of_ids, NULL);
+}
+
+arch_initcall(plat_of_setup);

arch/mips/lantiq/prom.h

@@ -26,4 +26,6 @@ struct ltq_soc_info {
 extern void ltq_soc_detect(struct ltq_soc_info *i);
 extern void ltq_soc_init(void);
 
+extern struct boot_param_header __dtb_start;
+
 #endif