• Assembler
  • Limitations
  • Installation
  • Example Usage
• Internals
  • Adding New Instructions
  • Debugging Generated Binaries
• Bugs?

Assembler

This repository contains a VERY BASIC x86-64 assembler, which is capable of reading assembly-language input, and generating a staticly linked ELF binary output.

It is more a proof-of-concept than a useful assembler, but I hope to take it to the state where it can compile the kind of x86-64 assembly I produce in some of my other projects.

Currently the assembler will generate a binary which looks like this:

$ file a.out
a.out: ELF 64-bit LSB executable, x86-64, version 1 (SYSV)
       statically linked, no section header

Why? I've written a couple of toy projects that generate assembly language programs, then pass them through an assembler:

• brainfuck compiler
• math compiler

The code in this repository was born out of the process of experimenting with generating an ELF binary directly. A necessary learning-process.

Limitations

We don't support anywhere near the complete instruction-set which an assembly language programmer would expect. Currently we support only things like this:

• add $REG, $REG + add $REG, $NUMBER
  • Add a number, or the contents of another register, to a register.
• call $LABEL
  • See call.asm for an example.
• dec $REG
  • Decrement the contents of the specified register.
  • We also support indirection, so the following work:
    • inc byte ptr [$REG]
    • inc word ptr [$REG]
    • inc dword ptr [$REG]
    • inc qword ptr [$REG]
• inc $REG
  • Increment the contents of the specified register.
  • We also support indirection, so the following work:
    • inc byte ptr [$REG]
    • inc word ptr [$REG]
    • inc dword ptr [$REG]
    • inc qword ptr [$REG]
• jmp $LABEL, je $LABEL, jne $LABEL
  • We support jumping instructions, but only with -127/+128 byte displacements
  • See jmp.asm for a simple example.
• mov $REG, $NUMBER
• mov $REG, $REG
  • Move a number into the specified register.
• nop
  • Do nothing.
• push $NUMBER, or push $IDENTIFIER
• ret
  • Return from call.
  • NOTE: We don't actually support making calls, though that can be emulated via push - see jmp.asm for an example.
• sub $REG, $REG + sub $REG, $NUMBER
  • Subtract a number, or the contents of another register, from a register.
• xor $REG, $REG
  • Set the given register to be zero.
• int $NUM
  • Call the kernel.
• Processor (flag) control instructions:
  • clc, cld, cli, cmc, stc, std, and sti.

Note that we really only support the following registers, you'll see that we only support the 64-bit registers (which means rax is supported but eax, ax, ah, and al are specifically not supported):

• rax
• rcx
• rdx
• rbx
• rsp
• rbp
• rsi
• rdi

There is some support for the extended registers r8-r15, but this varies on a per-instruction basis and should not be relied upon.

There is support for storing fixed-data within our program, and locating that. See hello.asm for an example of that.

We also have some other (obvious) limitations:

• There is notably no support for comparison instructions, and jumping instructions.
  • We emulate (unconditional) jump instructions via "push" and "ret", see jmp.asm for an example of that.
• The entry-point is always at the beginning of the source.
• You can only reference data AFTER it has been declared.
  • These are added to the data section of the generated binary, but must be defined first.
  • See hello.asm for an example of that.

Installation

If you have this repository cloned locally you can build the assembler like so:

cd cmd/assembler
go build .
go install .

If you wish to fetch and install via your existing toolchain:

go get -u github.com/skx/assembler/cmd/assembler

You can repeat for the other commands if you wish:

go get -u github.com/skx/assembler/cmd/lexer
go get -u github.com/skx/assembler/cmd/parser

Of course these binary-names are very generic, so perhaps better to work locally!

Example Usage

Build the assembler:

 $ cd cmd/assembler
 $ go build .

Compile the sample program, and execute it showing the return-code:

 $ cmd/assembler/assembler test.asm && ./a.out ; echo $?
 9

Or run the hello.asm example:

 $ cmd/assembler/assembler  hello.in && ./a.out
 Hello, world
 Goodbye, world

You'll note that the \n character was correctly expanded into a newline.

Internals

The core of our code consists of a small number of simple packages:

• A simple tokenizer lexer/lexer.go
• A simple parser parser/parser.go
  • This populates a simple internal-form/AST parser/ast.go.
• A simple compiler compiler/compiler.go
• A simple elf-generator elf/elf.go
  • Taken from vishen/go-x64-executable.

In addition to the package modules we also have a couple of binaries:

• cmd/lexer
  • Show the output of lexing a program.
  • This is useful for debugging and development-purposes, it isn't expected to be useful to end-users.
• cmd/parser
  • Show the output of parsing a program.
    • This is useful for debugging and development-purposes, it isn't expected to be useful to end-users.
• cmd/assembler
  • Assemble a program, producing an executable binary.

These commands located beneath cmd each operate the same way. They each take a single argument which is a file containing assembly-language instructions.

For example here is how you'd build and test the parser:

cd cmd/parser
go build .
$ ./parser ../../test.asm
&{{INSTRUCTION xor} [{REGISTER rax} {REGISTER rax}]}
&{{INSTRUCTION inc} [{REGISTER rax}]}
&{{INSTRUCTION mov} [{REGISTER rbx} {NUMBER 0x0000}]}
&{{INSTRUCTION mov} [{REGISTER rcx} {NUMBER 0x0007}]}
&{{INSTRUCTION add} [{REGISTER rbx} {REGISTER rcx}]}
&{{INSTRUCTION mov} [{REGISTER rcx} {NUMBER 0x0002}]}
&{{INSTRUCTION add} [{REGISTER rbx} {REGISTER rcx}]}
&{{INSTRUCTION int} [{NUMBER 0x80}]}

Adding New Instructions

This is how you might add a new instruction to the assembler, for example you might add jmp 0x00000 or some similar instruction:

• Add a new entry for the instruction in instructions/instructions.go
  • i.e. Update InstructionLengths map to add the instruction.
  • This will be used by both the tokenization process, and the parser.
• Generate the appropriate output in compiler/compiler.go, inside the function compileInstruction.
  • i.e. Emit the binary-code for the instruction.

Debugging Generated Binaries

Launch the binary under gdb:

$ gdb ./a.out

Start it:

(gdb) starti
Starting program: /home/skx/Repos/github.com/skx/assembler/a.out

Program stopped.
0x00000000004000b0 in ?? ()

Dissassemble:

(gdb)  x/5i $pc

Or show string-contents at an address:

(gdb) x/s 0x400000

Bugs?

Feel free to report, as this is more a proof of concept rather than a robust tool they are to be expected.

Specifically we're missing support for many instructions, but I hope the code generated for those that is present is correct.

Steve