2.42 inch 128x64 DIY More 7 wire

Jump to bottom

solarmon edited this page Jul 1, 2019 · 4 revisions

Convert to I2C

R4: Remove 472 resitor
R3: Add 472 resitor (from R4)
R5: Add 000 resistor
R7: Add 000 resistor

Notes:

472 resistor = 4.7k ohm resistor
000 resistor = 0 ohms resistor. Can be replaced with wire or solder blob.

Connect to Gotek

CS: (Not Connected)
DC: (Not Connected)
RES: Connect to Gotek RST Pin
SDA: Connect to Gotek DISP_CLK J7 Pin
SCL: Connect to Gotek DISP_DIO J7 Pin
VCC: Connect to Gotek 3.3V J7 Pin
GND: Connect to Gotek VSS J7 Pin

Gotek J7 Pins:

Gotek Power and Programming Pins:

Source

https://www.ebay.co.uk/itm/2-42-inch-LCD-Display-OLED-RGB-SSD1309-12864-SPI-Serial-Port-for-Arduino-C51/152952002220