Skip to content

Commit

Permalink
ARM: dts: msm: Add camera sensor nodes for atoll
Browse files Browse the repository at this point in the history 
Add sensor, actuator, eeprom and flash nodes for atoll

Change-Id: I754c9396dae6d2635bd092ca816591f956624076
Signed-off-by: Shravan Nevatia <snevatia@codeaurora.org>
  • Loading branch information
@stefanhh0
Shravan Nevatia authored and stefanhh0 committed Sep 6, 2020
1 parent 4c41249 commit ac33101
Show file tree
Hide file tree
Showing 2 changed files with 512 additions and 0 deletions.
256 changes: 256 additions & 0 deletions arch/arm64/boot/dts/qcom/atoll-camera-sensor-idp.dtsi
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,256 @@
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/

#include <dt-bindings/clock/qcom,camcc-atoll.h>

&soc {
led_flash_rear: qcom,camera-flash@0 {
cell-index = <0>;
reg = <0x00 0x00>;
compatible = "qcom,camera-flash";
flash-source = <&pm6150l_flash0 &pm6150l_flash1>;
torch-source = <&pm6150l_torch0 &pm6150l_torch1>;
switch-source = <&pm6150l_switch2 &pm6150l_switch2>;
status = "ok";
};

led_flash_rear_aux: qcom,camera-flash@1 {
cell-index = <1>;
reg = <0x01 0x00>;
compatible = "qcom,camera-flash";
flash-source = <&pm6150l_flash0 &pm6150l_flash1>;
torch-source = <&pm6150l_torch0 &pm6150l_torch1>;
switch-source = <&pm6150l_switch2 &pm6150l_switch2>;
status = "ok";
};
};

&cam_cci0 {
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};

actuator_rear: qcom,actuator@0 {
cell-index = <0>;
reg = <0x0>;
compatible = "qcom,actuator";
cci-master = <0>;
cam_vaf-supply = <&L6P>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2800000>;
rgltr-max-voltage = <2800000>;
rgltr-load-current = <100000>;
};

eeprom_rear: qcom,eeprom@0 {
cell-index = <0>;
reg = <0>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5P>;
cam_vana-supply = <&L4P>;
cam_vdig-supply = <&L1P>;
cam_clk-supply = <&titan_top_gdsc>;
cam_vaf-supply = <&L6P>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>;
rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>;
rgltr-load-current = <0 80000 105000 0 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_rear_active>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_rear_suspend>;
gpios = <&tlmm 13 0>,
<&tlmm 30 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
sensor-mode = <0>;
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "turbo";
clock-rates = <24000000>;
};

eeprom_front: qcom,eeprom@2 {
cell-index = <2>;
reg = <0x2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5P>;
cam_vana-supply = <&L3P>;
cam_vdig-supply = <&L1P>;
cam_clk-supply = <&titan_top_gdsc>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2800000 1104000 0>;
rgltr-max-voltage = <1800000 2800000 1104000 0>;
rgltr-load-current = <0 80000 105000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_front_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_front_suspend>;
gpios = <&tlmm 15 0>,
<&tlmm 29 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
sensor-mode = <0>;
cci-device = <0>;
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "turbo";
clock-rates = <24000000>;
};

qcom,cam-sensor@0 {
cell-index = <0>;
compatible = "qcom,cam-sensor";
reg = <0x0>;
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
led-flash-src = <&led_flash_rear>;
eeprom-src = <&eeprom_rear>;
actuator-src = <&actuator_rear>;
cam_vio-supply = <&L5P>;
cam_vana-supply = <&L4P>;
cam_vdig-supply = <&L1P>;
cam_clk-supply = <&titan_top_gdsc>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2800000 1104000 0>;
rgltr-max-voltage = <1800000 2800000 1104000 0>;
rgltr-load-current = <0 80000 105000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_rear_active>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_rear_suspend>;
gpios = <&tlmm 13 0>,
<&tlmm 30 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
sensor-mode = <0>;
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "turbo";
clock-rates = <24000000>;
};

qcom,cam-sensor@1 {
cell-index = <1>;
compatible = "qcom,cam-sensor";
reg = <0x1>;
csiphy-sd-index = <1>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
led-flash-src = <&led_flash_rear_aux>;
cam_vio-supply = <&L5P>;
cam_vana-supply = <&L3P>;
cam_vdig-supply = <&L2P>;
cam_clk-supply = <&titan_top_gdsc>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2800000 1104000 0>;
rgltr-max-voltage = <1800000 2800000 1104000 0>;
rgltr-load-current = <0 80000 105000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_rear2_active>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_rear2_suspend>;
gpios = <&tlmm 14 0>,
<&tlmm 25 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
sensor-mode = <0>;
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "turbo";
clock-rates = <24000000>;
};

qcom,cam-sensor@2 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
reg = <0x2>;
csiphy-sd-index = <2>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_front>;
cam_vio-supply = <&L5P>;
cam_vana-supply = <&L3P>;
cam_vdig-supply = <&L1P>;
cam_clk-supply = <&titan_top_gdsc>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2800000 1104000 0>;
rgltr-max-voltage = <1800000 2800000 1104000 0>;
rgltr-load-current = <0 80000 105000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_front_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_front_suspend>;
gpios = <&tlmm 15 0>,
<&tlmm 29 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
sensor-mode = <0>;
cci-device = <0>;
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "turbo";
clock-rates = <24000000>;
};
};
Loading

0 comments on commit ac33101

Please sign in to comment.