omnisharp-emacs is being depreciated in favor of LSP-flavoured clients and is
not being actively developed. There are a couple of LSP clients that you can use
in emacs that communicate over LSP with omnisharp-roslyn server:
Some of the features of omnisharp-emacs have not been ported to LSP yet, however, like:
- assembly introspection (ability to jump to a definition imported from a .dll).
omnisharp-emacs is a port of the awesome omnisharp-roslyn server to the Emacs text editor. It provides IDE-like features for editing files in C# solutions in Emacs, provided by an OmniSharp server instance that works in the background.
Note that C# syntax highlighting and indenting is provided by csharp-mode which is a dependency of this
package. See Configuration section below on how to enable
omnisharp-mode via the csharp-mode hook.
This package is licensed under GNU General Public License version 3, or (at your option) any later version.
Please see omnisharp-emacs Features. Please note that information
on the Features page is outdated and some commands are not ported to the new roslyn
version of omnisharp-emacs yet.
This package requires Emacs 24.4 and above. It has been tested on Ubuntu, Windows 7+ and on macOS.
You may need to have one or more of .NET SDKs (and mono – on UNIX platforms) installed for your project to be properly processed by omnisharp server.
Note that multiple .NET SDKs can be installed in parallel, too.
See:
Add csharp layer to dotspacemacs-configuration-layers on your .spacemacs
file and restart Emacs or run dotspacemacs/sync-configuration-layers (SPC f e R
in evil mode, M-m f e R in Emacs mode).
csharp-mode and omnisharp packages will get installed automatically for you
as the configuration is reloaded.
To install, use MELPA. After MELPA is configured correctly, use
M-x package-refresh-contents RET M-x package-install RET omnisharp RET
to install.
When installing the omnisharp package package.el will also
automatically pull in csharp-mode for you as well.
You can also add
(package-install 'omnisharp)
to your init.el to force installation of omnisharp-emacs on
every install.
This section describes an example configuration for omnisharp-emacs.
This is not required if you are using spacemacs unless you want to
override existing bindings, etc.
Add this to csharp-mode-hook to your init.el to automatically invoke
omnisharp-emacs when opening C# files:
(add-hook 'csharp-mode-hook 'omnisharp-mode)
omnisharp-emacs will attempt to start a server automatically for you when
opening a .cs file (if a server has not been started already). Otherwise, you
will need to start the server with M-x omnisharp-start-omnisharp-server RET
should it fail to find a .sln file or project root (via projectile). It will
prompt you for a solution file or project root directory you want to work
with.
For autocompletion via company
mode to work you will also need this in your init.el:
(eval-after-load
'company
'(add-to-list 'company-backends 'company-omnisharp))
(add-hook 'csharp-mode-hook #'company-mode)
Also, for company completion to work you need to install company from
melpa.
omnisharp-emacs supports Flycheck
and it can be enabled automatically by hooking up flycheck-mode to be enabled
for csharp-mode buffers:
(add-hook 'csharp-mode-hook #'flycheck-mode)
This is an example code that will enable company-mode and flycheck-mode
and will set some formatting variables for csharp-mode. Also, it shows how
to setup keybindings for csharp-mode.
(eval-after-load
'company
'(add-to-list 'company-backends #'company-omnisharp))
(defun my-csharp-mode-setup ()
(omnisharp-mode)
(company-mode)
(flycheck-mode)
(setq indent-tabs-mode nil)
(setq c-syntactic-indentation t)
(c-set-style "ellemtel")
(setq c-basic-offset 4)
(setq truncate-lines t)
(setq tab-width 4)
(setq evil-shift-width 4)
;csharp-mode README.md recommends this too
;(electric-pair-mode 1) ;; Emacs 24
;(electric-pair-local-mode 1) ;; Emacs 25
(local-set-key (kbd "C-c r r") 'omnisharp-run-code-action-refactoring)
(local-set-key (kbd "C-c C-c") 'recompile))
(add-hook 'csharp-mode-hook 'my-csharp-mode-setup t)
There is also an example configuration for evil-mode included in the project,
please see doc/example-config-for-evil-mode.el.
This emacs package requires the omnisharp-roslyn server program. Emacs will manage connection to the server as a subprocess.
The easiest/default way to install the server is to invoke
M-x omnisharp-install-server and follow instructions on minibuffer.
If that fails (or you feel adventurous) please see installing omnisharp server on how to install the server manually.
Most of the time (if the server has been installed properly) you can diagnose
issues by looking at the *omnisharp-log* buffer where omnisharp-emacs emits
any log messages from the omnisharp server.
Some projects may fail to load in omnisharp-server when Mono.framework is not on $PATH or $PATH is not picked up by emacs.
An example output in omnisharp-log is:
[12:23:33] ERROR: OmniSharp.MSBuild.ProjectFile.ProjectFileInfo, The reference assemblies for
framework ".NETFramework,Version=v3.5" were not found. To resolve this, install the SDK or
Targeting Pack for this framework version or retarget your application to a version of the framework
for which you have the SDK or Targeting Pack installed. Note that assemblies will be resolved from
the Global Assembly Cache (GAC) and will be used in place of reference assemblies. Therefore your
assembly may not be correctly targeted for the framework you intend.
See issue #426.
If you see
[13:04:01] ERROR: OmniSharp.MSBuild.ProjectFile.ProjectFileInfo, The reference assemblies for framework ".NETFramework,Version=v4.5.1" were not found. To resolve this, install the SDK or Targeting Pack for this framework version or retarget your application to a version of the framework for which you have the SDK or Targeting Pack installed. Note that assemblies will be resolved from the Global Assembly Cache (GAC) and will be used in place of reference assemblies. Therefore your assembly may not be correctly targeted for the framework you intend.
then add the official Mono repository by following the instructions on
https://www.mono-project.com/download/stable/ and install the package
mono-complete.
On Debian-based systems:
sudo apt install --no-install-recommends mono-complete
On Fedora:
sudo dnf install mono-complete
On CentOS:
sudo yum install mono-complete
You'll need this even if you've installed the official Microsoft Linux
packages (dotnet etc.).
You may find that your project can not be loaded when .NET SDK is not installed on your machine.
A log line indicating the problem would look like this on *omnisharp-log*:
[19:24:59] WARNING: Microsoft.Build.Exceptions.InvalidProjectFileException: The SDK 'Microsoft.NET.Sdk' specified could not be found. ...
You may encounter an issue where omnisharp server fails to load a project, this looks like on *omnisharp-log*:
[22:46:22] WARNING: OmniSharp.MSBuild.MSBuildProjectSystem, Failed to load project file '/Users/{user}/temp/temp.csproj'.
To fix this, on Linux, you may need to install the msbuild-stable package.
This issue and a fix has been reported on issue #430.
On Linux, it's possible for the plugin to open the server binary, OmniSharp.exe, in a different program than mono, due to binary format rules. OmniSharp.exe needs to be passed to mono, but a binfmt rule might override that.
In the case of wine being used to run OmniSharp.exe, the plugin might trigger a wine desktop to appear, if the prefix is set to emulate one. Additionally, the plugin will issue several errors like this:
omnisharp--handle-server-message error: (wrong-type-argument listp 0). See the OmniServer process buffer for detailed server output.
Different distros may manage binfmt a bit differently. To fix this, either consult distro specific documentation and find how to remove the offending rule or set omnisharp-server-executable-path to a shell script that explictly calls mono:
#!/bin/sh
exec mono "[path to omnisharp]/OmniSharp.exe" "$@"This issue and workarounds for the Arch+Wine case have been reported on issue #477.
You can run all kind of tests by following shell script.
./run-tests.shPull requests welcome!
