Initial commit

.gitattributes

@@ -0,0 +1,2 @@
+# Auto detect text files and perform LF normalization
+* text=auto

LICENSE.md

@@ -0,0 +1,55 @@
+SparkFun License Information
+============================
+
+SparkFun uses two different licenses for our files — one for hardware and one for code.
+
+Hardware
+---------
+
+**SparkFun hardware is released under [Creative Commons Share-alike 4.0 International](http://creativecommons.org/licenses/by-sa/4.0/).**
+
+Note: This is a human-readable summary of (and not a substitute for) the [license](http://creativecommons.org/licenses/by-sa/4.0/legalcode).
+
+You are free to:
+
+Share — copy and redistribute the material in any medium or format
+Adapt — remix, transform, and build upon the material
+for any purpose, even commercially.
+The licensor cannot revoke these freedoms as long as you follow the license terms.
+Under the following terms:
+
+Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
+ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
+No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
+Notices:
+
+You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
+No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
+
+
+Code
+--------
+
+**SparkFun code, firmware, and software is released under the MIT License(http://opensource.org/licenses/MIT).**
+
+The MIT License (MIT)
+
+Copyright (c) 2016 SparkFun Electronics
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -0,0 +1,41 @@
+SparkFun BNO080 IMU Library
+===========================================================
+
+![SparkFun Inertial Measurement Unit - BNO080](https://cdn.sparkfun.com//assets/parts/1/2/7/3/3/14586-VR_IMU__Qwiic__-_BNO080-01.jpg)
+
+[*SparkX IMU BNO080 (SPX-14586)*](https://www.sparkfun.com/products/14586)
+
+The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms. This enables the BNO080 Inertial Measurement Unit (IMU) to produce accurate rotation vector headings with an error of 5 degrees or less. It's what we've been waiting for: all the sensor data is combined into meaningful, accurate IMU information.
+
+This IC was designed to be implemented in Android based cellular phones to handle all the computations necessary for virtual reality goggles using only your phone. The sensor is quite powerful but with power comes a complex interface. We've written an I<sup>2</sup>C based library that provides the rotation vector (the reading most folks want from an IMU) as well as raw acceleration, gyro, and magnetometer readings. The sensor is capable of communicating over SPI and UART as well!
+
+In addition the BNO080 IMU provides a built-in step counter, tap detector, activity classifier (are you running, walking, or sitting still?), and a shake detector. We are duly impressed.
+
+Library written by Nathan Seidle ([SparkFun](http://www.sparkfun.com)).
+
+Repository Contents
+-------------------
+
+* **/examples** - Example sketches for the library (.ino). Run these from the Arduino IDE. 
+* **/src** - Source files for the library (.cpp, .h).
+* **keywords.txt** - Keywords from this library that will be highlighted in the Arduino IDE. 
+* **library.properties** - General library properties for the Arduino package manager. 
+
+Documentation
+--------------
+
+* **[Installing an Arduino Library Guide](https://learn.sparkfun.com/tutorials/installing-an-arduino-library)** - Basic information on how to install an Arduino library.
+* **[Product Repository](https://github.com/sparkfunX/Qwiic_IMU_BNO080)** - Main repository (including hardware files)
+
+License Information
+-------------------
+
+This product is _**open source**_! 
+
+Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round! Anything Maxim wrote has its own license. Anything that was co-writing with Peter Jansen is BSD.
+
+Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
+
+Distributed as-is; no warranty is given.
+
+- Your friends at SparkFun.