Skip to content

squared-electronic/avr-tca8418

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

28 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

AVR TCA8418 I2C Keypad Driver

Product Page: https://www.ti.com/product/TCA8418

Datasheet: https://www.ti.com/lit/ds/symlink/tca8418.pdf

This is a driver for the TCA8418 for AVR microcontrollers.

Features

  • Interrupt-driven only
  • Reports key presses, releases, and holds.
  • Supports callbacks for key presses and releases
  • Properly reports multi-key presses, holds, and releases
  • Support GPIO interrupt-driven inputs
  • Small SRAM size for all device 80-key and 18-GPIO support
  • wasKeyPressed, wasKeyReleased, isKeyHeld simple API
  • Provides error codes on all I2C operations which may fail

Not Supported

  • GPIO Outputs
  • Keypad lock / unlock features

Usage

  • Initialize I2C
  • Enable an external interrupt on falling edge, and connect the TCA8418's INT pin to the MCU
  • Call handleInterrupt in the main loop if the external interrupt was triggered
  • Place updateButtonStates at the beginning of the main loop to process any pending interrupt events to be observable by the API on this loop

The wasKeyPressed and similar API is guaranteed to only return true once, then be false after the next call to updateButtonStates, unless the key is re-pressed. Use isKeyHeld to detect holds. This prevents duplicate events on checking for a key press on each loop.

The driver guarantees each iteration of the main loop is completed with the same information. For example, if an interrupt arrives in the middle of the main loop, no state changes will be observed until after the next call to updateButtonStates.

The driver includes a small I2C wrapper (modified from https://github.com/Sovichea/avr-i2c-library) and expects the user to initialize the I2C bus to their application's needs.

ATmega324 Example

#include <TCA8418.h>
#include <avr/interrupt.h>
#include <avr/io.h>

void initI2c() {
  // set pullups for SDA / SCL
  DDRC &= ~_BV(PC1);
  DDRC &= ~_BV(PC0);
  PORTC |= _BV(PC1) | _BV(PC0);

  // initialize twi prescaler and bit rate (250k)
  // Set prescaler value of 1
  TWSR &= ~_BV(TWPS0);
  TWSR &= ~_BV(TWPS1);
  TWBR = ((F_CPU / 250000) - 16) / 2;
}

void initInterrupts() {
  // Falling edge of INT1 for keypad to read current key
  EICRA |= _BV(ISC11);
  EICRA &= ~_BV(ISC10);

  EIMSK |= _BV(INT1);
}

volatile bool CheckKeypad = false;

void onKeyPressed(uint8_t keyCode) {
  // Do something with key press....
}

void onKeyReleased(uint8_t keyCode) {
  // Do something with key release....
}

int main() {
  initI2c();
  initInterrupts();
  sei();

  TCA8418 keypad;

  TCA8418::row_t key_rows[] = {TCA8418::row_t::ROW0, TCA8418::row_t::ROW1, TCA8418::row_t::ROW2,
                               TCA8418::row_t::ROW3};

  TCA8418::col_t key_cols[] = {TCA8418::col_t::COL0, TCA8418::col_t::COL1};

  TCA8418::pin_t gpios[] = {TCA8418::pin_t::COL6, TCA8418::pin_t::COL7};

  TCA8418::Config c = {
      .Keypad =
          {
              .Rows = key_rows,
              .Cols = key_cols,
              .RowsCount = sizeof(key_rows) / sizeof(key_rows[0]),
              .ColsCount = sizeof(key_cols) / sizeof(key_cols[0]),
          },
      .GpioInput =
          {
              .InterruptOnRisingEdge = false,
              .EnablePullups = false,
              .EnableDebounce = true,
              .Pins = gpios,
              .PinsCount = sizeof(gpios) / sizeof(gpios[0]),
          },
  };

  keypad.setKeyPressedCallback(onKeyPressed);
  keypad.setKeyReleasedCallback(onKeyReleased);

  auto error = keypad.begin(&c);

  if (error) {
    // Handle error...
  }

  // Key codes reported directly from hardware
  const uint8_t keyCodes[] = {
      1, 2, 3, 11, 12, 13, 21, 22, 23, 31, 32, 33,
  };

  while (1) {
    if (CheckKeypad) {
      keypad.handleInterrupt();
      CheckKeypad = false;
    }

    keypad.updateButtonStates();

    // Check for keys directly, or rely on the onKeyPress and onKeyRelease callbacks.
    for (uint8_t i = 0; i < sizeof(keyCodes); ++i) {
      if (keypad.wasKeyPressed(keyCodes[i])) {
        // Handle key press
      } else if (keypad.wasKeyReleased(keyCodes[i])) {
        // Handle key release
      }
    }
  }

  return 0;
}

ISR(INT1_vect) {
  CheckKeypad = true;
}

Releases

No releases published

Packages

No packages published