RDPWrap doesn't support 10.0.17763.437 #720

allistar · 2019-04-09T23:04:07Z

Hi all,
After Windows updated itself the termsrv.dll file is now at version 10.0.17763.437. RDPWrapper doesn't support this version. Can we expect support for this soon?

Thanks,
Allistar.

luizluan · 2019-04-10T01:50:10Z

Same here, Any Fix (I try downgrade termsrv.dll)?

klin174 · 2019-04-10T04:45:42Z

Same, hope to get it fixed soon.

tvcat · 2019-04-10T06:33:42Z

I only have x64
SLInit is the same just copy paste

[10.0.17763.437]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=77A41
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=3E520
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=18025
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=1ACDC
SLInitFunc.x64=New_CSLQuery_Initialize

hagaygo · 2019-04-10T06:47:06Z

I only have x64
SLInit is the same just copy paste

[10.0.17763.437]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=77A41
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=3E520
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=18025
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=1ACDC
SLInitFunc.x64=New_CSLQuery_Initialize

copied your text, listener not working.

copied SLInit , checks all green , but wont allow me to connect with multiple users.

klin174 · 2019-04-10T07:12:39Z

I only have x64
SLInit is the same just copy paste

[10.0.17763.437]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=77A41
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=3E520
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=18025
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=1ACDC
SLInitFunc.x64=New_CSLQuery_Initialize

Just tested, it worked for me, thanks.

klin174 · 2019-04-10T07:17:04Z

This is my SLInit part, it was copy from 17763.292, that worked for me.

[10.0.17763.437-SLInit]
bInitialized.x86 =CD798
bServerSku.x86 =CD79C
lMaxUserSessions.x86 =CD7A0
bAppServerAllowed.x86 =CD7A8
bRemoteConnAllowed.x86=CD7AC
bMultimonAllowed.x86 =CD7B0
ulMaxDebugSessions.x86=CD7B4
bFUSEnabled.x86 =CD7B8
bInitialized.x64 =ECAB0
bServerSku.x64 =ECAB4
lMaxUserSessions.x64 =ECAB8
bAppServerAllowed.x64 =ECAC0
bRemoteConnAllowed.x64=ECAC4
bMultimonAllowed.x64 =ECAC8
ulMaxDebugSessions.x64=ECACC
bFUSEnabled.x64 =ECAD0

hagaygo · 2019-04-10T07:36:21Z

Still not working for me , can you post your full .ini file ?

maybe i am missing something ?

metiso · 2019-04-10T07:38:23Z

not working for me, Can someone give the dll and ini file?

romanad · 2019-04-10T07:40:24Z

Doesn't working, we really need a fix, Please, I really can't live withour RDPWrap.

SDGdimitry · 2019-04-10T08:18:29Z

Doesn't working, we really need a fix, Please, I really can't live withour RDPWrap.

rdpwrap.zip

It works!!!

hagaygo · 2019-04-10T08:35:21Z

with @SDGdimitry supplied INI it works.

Thanks

metiso · 2019-04-10T08:47:24Z

and the dll file? ? of version rdpwrap 1.6.2 ?

hagaygo · 2019-04-10T08:54:34Z

Used same install (RDP Wrap 1.62)

SDGdimitry · 2019-04-10T08:54:40Z

and the dll file? ? of version rdpwrap 1.6.2 ?

No need dll...

klin174 · 2019-04-10T09:05:07Z

For those who couldn’t get it to work, if you are sure you’ve copied the correct text to the ini file, make sure to add a blank line to end of the ini file.

1Pekol · 2019-04-10T09:48:52Z

Hi, I have 32bit dll. Cloud sombody help me? Please.
termsrv.zip

saurav-biswas · 2019-04-10T10:25:30Z

Not working for me.

bramburn · 2019-04-10T10:36:18Z

@saurav-biswas
try this for a temp fix:
#722 (comment)

Inkvision · 2019-04-10T14:06:53Z

Does anyone have for 32 bit version? Offset's. ini? Above solution works fine for x64 bit version of RDPWrapper.
Please anyone?

Inkvision · 2019-04-10T15:12:47Z

Nope, I think he need help with 32 bit version too :(

graphixillusion · 2019-04-10T15:49:29Z

I confirm that with this ini file #720 (comment) it works good under 17763.437. If it doesn't work simply stop and restart "termservice" service:
net stop termservice
net start termservice

Inkvision · 2019-04-10T15:56:40Z

Yes, with x64 version works perfectly. Unfortunately not working with Windows 10 32bit - listener state is NOT LISTENING but fully supported. (#720 comment ini file).

Inkvision · 2019-04-10T15:59:04Z

W10 Home 32bit ver. 10.0.17763.437 (#720 ini) service stop and start don't solve the problem.

saurav-biswas · 2019-04-10T19:23:20Z

@bramburn thanks, problem is eesolved for now, but i want a permanent solution

Julien-nl · 2019-04-10T21:24:42Z

#720 comment got it fixed, i confirm this,
does anyone got the a patched termserv.dll 10.0.17763.437?

allistar · 2019-04-10T21:33:22Z

I can confirm that the ini file provided in comment #720 has worked for me too. Thanks everyone.

MenNianShi · 2019-04-11T02:34:29Z

After "net stop termservice" and "net start termservice",it worked for me. Thanks

graphixillusion · 2019-04-12T19:47:05Z

Anyone have found a solution for resuming an already disconnected session?

hhelmbold · 2019-04-26T06:07:25Z

Sorry - I am completely missing the "How to" part between all the different comments. Can I just ask someone to give a quick step by step explanation of what to do?

Where must the ini file be copied?
If I downloaded the ini file, must I still edit anything?

Sorry I am lost...

gamma-577 · 2019-04-26T08:20:32Z

@hhelmbold

You need to copy the rdpwrap.ini file to the folder "C:\Program Files\RDP Wrapper" . If it still doesn't work then you need to edit the ini file.

Thank you!

-Gamma

hhelmbold · 2019-04-26T10:33:24Z

@hhelmbold

You need to copy the rdpwrap.ini file to the folder "C:\Program Files\RDP Wrapper" . If it still doesn't work then you need to edit the ini file.

Thank you!

-Gamma

Thank you so much for the reply - but I am still in the dark here... If copying the .ini file doesn't work, what should I edit? I thought the downloaded ini file was the edited file?

The listener is now showing as "Listening" but it still shows ver. 10.0.17763.292 [not supported]

gamma-577 · 2019-04-27T08:33:16Z

@hhelmbold

sorry for my late reply.

You need to check following information.

32 bit or 64 bit windows
Windows 10 OS build as reported in Settings --> System --> About --> OS build

Thanks!

-Gamma

hhelmbold · 2019-04-27T11:22:49Z

I truly appreciate the replies and I will take them at whatever speed they come :-) Unfortunately the PC is at school and I don't have the full build details now, but it is a 64-bit Windows 10 Pro setup. I will confirm but I think it is Version 1809 and build 17763.437

gamma-577 · 2019-04-27T13:43:18Z

@hhelmbold

Thanks for your understanding. :-)

From your info the probable good news is the will work. A few users had same version and the changes worked for them.

I see that the current ini file does not have a section for build 17763.437. That's why it's looking at the nearest available build which is 17763.292. Then it doesn't find an appropriate entries for 17763.292. So it says [292 not supported]. The solution is adding entries for 17763.437.

Assuming you reported the version (1809) and build (437) correctly, you need to add these two sections to the ini file :

;----------------- build 10.0.17763.437 starts ----------------
[10.0.17763.437]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=77A41
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=3E520
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=18025
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=1ACDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.17763.437-SLInit]
bInitialized.x86 =CD798
bServerSku.x86 =CD79C
lMaxUserSessions.x86 =CD7A0
bAppServerAllowed.x86 =CD7A8
bRemoteConnAllowed.x86=CD7AC
bMultimonAllowed.x86 =CD7B0
ulMaxDebugSessions.x86=CD7B4
bFUSEnabled.x86 =CD7B8
bInitialized.x64 =ECAB0
bServerSku.x64 =ECAB4
lMaxUserSessions.x64 =ECAB8
bAppServerAllowed.x64 =ECAC0
bRemoteConnAllowed.x64=ECAC4
bMultimonAllowed.x64 =ECAC8
ulMaxDebugSessions.x64=ECACC
bFUSEnabled.x64 =ECAD0
;----------------- build 10.0.17763.437 ends ----------------

These entries are sourced from earlier posts. They are confirmed working. Hope they work for you as well.

Thanks !

-Gamma

hhelmbold · 2019-04-27T14:02:56Z

Thank you so much Gamma!

So am I correct that if the build is different eg. 292 instead of 437 I would basically just have to copy the above and change build numbers? It helps a lot more now that I understand a bit more. I will be trying this first thing Monday morning when I get back to the school.

Really appreciate your help! Thanks again

gamma-577 · 2019-04-27T20:32:56Z

@hhelmbold

You are welcome! :-)

If the build no is other than 437 then you need to supply another set of offsets appropriate for that build no. Normally you can't just change its label. You may give it a try though. I did and I failed. But who knows, it might simply work for you ! Fingers crossed. I am too not an expert. I am also learning from your situation. So thanks for updating. :-)

-Gamma

hhelmbold · 2019-04-29T07:51:47Z

I am starting to feel a bit stupid here... I edited the ini file and pasted the suggested code.

My current OS version and build number is : version 1809 and build 17763.437

Running the RDPconf file the status is green on everything except I still get the ver 10.0.17134.706 [not supported] - is this referring to the termsrv.dll version?

gamma-577 · 2019-04-29T08:25:34Z

@hhelmbold

That's really confusing. rdpwrap is reading your os build as 17134.706 instead of 17763.437. My guess is the rdpwrap has some leftovers from previous installation. I would suggest uninstall rdpwrap. Please use uninstall.bat. Then restart the pc and reinstall.

Then check if it works. If not, add the entries posted above.

Also please ensure that you are using latest rdpwrap that's version 1.6.2 (ref : https://github.com/stascorp/rdpwrap/releases).

Thanks!

-Gamma

hhelmbold · 2019-04-29T09:09:31Z

Success!!... Well.... almost :-(

Thanks for the help, it is now reading the build correctly, everything is green and says fully supported, except if I run the RDPcheck I can only have 2 instances open.

Our setup consists of nComputing MX100S units connecting to Windows 10 "server" - We have to use Windows 10 cause Microsoft Server doesn't support the Microsoft store and a lot of the educational games used in the classroom doesn't run on Windows Server. Everything was working great until Friday when Windows updated.

I am not sure if I am still missing something with the RDP utility? I mean everything shows that's it's fully functioning but shouldn't I be able to open several RDPcheck windows?

gamma-577 · 2019-04-29T13:00:50Z

@hhelmbold

Nice to hear your success ! :-)

I feel the rdpwrap error is resolved. Your problem looks like a config issue. It might be out of scope for this thread. I don't mind helping you, but we need to proceed to a more suitable place. If you find one such, I will be happy to follow you. Just leave a pointer here.

Thank you for your understanding.

-Gamma

hhelmbold · 2019-04-29T13:07:56Z

@gamma-577 - You have been a HUGE help!! Thanks

KevinH404 · 2019-05-22T08:13:35Z

Doesn't working, we really need a fix, Please, I really can't live withour RDPWrap.

rdpwrap.zip

It works!!!

this is the right solution for 64bit 10.0.17763.437

This comment was marked as spam.

Sign in to view

gitgotgone mentioned this issue Apr 15, 2019

Rdpwrap.ini for new win 10 updates #744

Closed

CipherNameRaven mentioned this issue May 1, 2019

RDPWrap issue 10.0.17763.437 even after update #769

Closed

RDPWrap doesn't support 10.0.17763.437 #720

RDPWrap doesn't support 10.0.17763.437 #720

Comments

allistar commented Apr 9, 2019

luizluan commented Apr 10, 2019

This comment was marked as spam.

klin174 commented Apr 10, 2019

tvcat commented Apr 10, 2019 • edited

hagaygo commented Apr 10, 2019

klin174 commented Apr 10, 2019

klin174 commented Apr 10, 2019

hagaygo commented Apr 10, 2019

metiso commented Apr 10, 2019

romanad commented Apr 10, 2019

SDGdimitry commented Apr 10, 2019 • edited

hagaygo commented Apr 10, 2019

metiso commented Apr 10, 2019

hagaygo commented Apr 10, 2019

SDGdimitry commented Apr 10, 2019

klin174 commented Apr 10, 2019

1Pekol commented Apr 10, 2019

saurav-biswas commented Apr 10, 2019

bramburn commented Apr 10, 2019

This comment was marked as spam.

Inkvision commented Apr 10, 2019 • edited

This comment was marked as spam.

Inkvision commented Apr 10, 2019

graphixillusion commented Apr 10, 2019 • edited

Inkvision commented Apr 10, 2019 • edited

Inkvision commented Apr 10, 2019

saurav-biswas commented Apr 10, 2019

Julien-nl commented Apr 10, 2019

allistar commented Apr 10, 2019

MenNianShi commented Apr 11, 2019 • edited

graphixillusion commented Apr 12, 2019

hhelmbold commented Apr 26, 2019

gamma-577 commented Apr 26, 2019

hhelmbold commented Apr 26, 2019 • edited

gamma-577 commented Apr 27, 2019

hhelmbold commented Apr 27, 2019

gamma-577 commented Apr 27, 2019

hhelmbold commented Apr 27, 2019

gamma-577 commented Apr 27, 2019

hhelmbold commented Apr 29, 2019

gamma-577 commented Apr 29, 2019

hhelmbold commented Apr 29, 2019

gamma-577 commented Apr 29, 2019

hhelmbold commented Apr 29, 2019

KevinH404 commented May 22, 2019

tvcat commented Apr 10, 2019 •

edited

SDGdimitry commented Apr 10, 2019 •

edited

Inkvision commented Apr 10, 2019 •

edited

graphixillusion commented Apr 10, 2019 •

edited

Inkvision commented Apr 10, 2019 •

edited

MenNianShi commented Apr 11, 2019 •

edited

hhelmbold commented Apr 26, 2019 •

edited