[refactoring] st-util: removed now useless v1/v2 STLink version stuff

doc/man/st-flash.md

@@ -20,6 +20,9 @@ You can use this instead of st-util(1) if you prefer, but remember to use the
 
 Use hexadecimal format for the *ADDR* and *SIZE*.
 
+The STLink device to use can be specified using the --serial parameter, or via 
+the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
+
 # COMMANDS
 
 write *FILE* *ADDR*

doc/man/st-info.md

@@ -11,9 +11,12 @@ st-info - Provides information about connected STLink and STM32 devices
 
 
 # DESCRIPTION
+
 Provides information about connected STLink programmers and STM32 devices:
 Serial code, OpenOCD hla-serial, flash, page size, sram, chipid, description.
 
+The STLink device to probe can be specified via the environment variable 
+STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 
 # OPTIONS
 

doc/man/st-util.md

@@ -17,10 +17,8 @@ Run the main binary of the local package (src/main.rs).
 If a port number is not specified using the **--listen_port** option, the
 default **4242** port will be used.
 
-Stlink version 2 is used by default unless the option **--stlinkv1** is given.
-
-The STLinkV2 device to use can be specified in the environment
-variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
+The STLink device to use can be specified using the --serial parameter, or via 
+the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 
 # OPTIONS
 
@@ -36,12 +34,6 @@ variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 -v, \--verbose
 :   Specify generally verbose logging
 
--s *X*, \--stlink_version=*X*
-:   Choose what version of stlink to use, (defaults to 2)
-
--1, \--stlinkv1
-:   Force stlink version 1
-
 -p *4242*, \--listen_port=1234
 :   Set the gdb server listen port. (default port: 4242)
 

doc/tutorial.md

@@ -168,18 +168,14 @@ will help you verify that:
 -   Your arm-none-eabi-gdb is functional
 -   Your board is functional
 
-A GDB server must be started to interact with the STM32. Depending on
-the discovery kit you are using, you must run one of the 2 commands:
+A GDB server must be started to interact with the STM32 by running 
+st-util tool :
 
 ```
-# STM32VL discovery kit (onboard ST-link)
-$> ./st-util --stlinkv1
-
-# STM32L or STM32F4 discovery kit (onboard ST-link/V2)
-$> ./st-util
+$> st-util
 
 # Full help for other options (listen port, version)
-$> ./st-util --help
+$> st-util --help
 ```
 
 Then, GDB can be used to interact with the kit:
@@ -226,16 +222,10 @@ memory, or read arbitary addresses of memory out to a binary file, use
 the st-flash tool, as shown below:
 
 ```
-# stlinkv1 command to read 4096 from flash into out.bin
-$> ./st-flash read out.bin 0x8000000 4096
-
-# stlinkv2 command
+# stlink command to read 4096 from flash into out.bin
 $> ./st-flash read out.bin 0x8000000 4096
 
-# stlinkv1 command to write the file in.bin into flash
-$> ./st-flash write in.bin 0x8000000
-
-# stlinkv2 command
+# stlinkv command to write the file in.bin into flash
 $> ./st-flash write in.bin 0x8000000
 ```
 
@@ -273,9 +263,6 @@ There are a few options:
   -h, --help		Print this help
   -vXX, --verbose=XX	Specify a specific verbosity level (0..99)
   -v, --verbose		Specify generally verbose logging
-  -s X, --stlink_version=X
-			Choose what version of stlink to use, (defaults to 2)
-  -1, --stlinkv1	Force stlink version 1
   -p 4242, --listen_port=1234
 			Set the gdb server listen port. (default port: 4242)
   -m, --multi
@@ -285,8 +272,8 @@ There are a few options:
 			Do not reset board on connection.
 ```
 
-The STLINKv2 device to use can be specified in the environment
-variable `STLINK_DEVICE` in the format `<USB_BUS>:<USB_ADDR>`.
+The STLink device to use can be specified using the --serial parameter, or via 
+the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 
 Then, in your project directory, someting like this...
 (remember, you need to run an _ARM_ gdb, not an x86 gdb)

src/gdbserver/gdb-server.c

@@ -59,7 +59,6 @@ static const char* current_memory_map = NULL;
 
 typedef struct _st_state_t {
     // things from command line, bleh
-    int stlink_version;
     int logging_level;
     int listen_port;
     int persistent;
@@ -86,30 +85,20 @@ static void cleanup(int signum) {
 
 
 static stlink_t* do_connect(st_state_t *st) {
-    stlink_t *ret = NULL;
-    switch (st->stlink_version) {
-        case 2:
-            if (serial_specified){
-                ret = stlink_open_usb(st->logging_level, st->reset, serialnumber);
-            }
-            else {
-                ret = stlink_open_usb(st->logging_level, st->reset, NULL);
-            }
-            break;
-        case 1:
-            ret = stlink_v1_open(st->logging_level, st->reset);
-            break;
+    stlink_t *sl = NULL;
+	if (serial_specified) {
+		sl = stlink_open_usb(st->logging_level, st->reset, serialnumber);
+	} else {
+		sl = stlink_open_usb(st->logging_level, st->reset, NULL);
     }
-    return ret;
+    return sl;
 }
 
 
 int parse_options(int argc, char** argv, st_state_t *st) {
     static struct option long_options[] = {
         {"help", no_argument, NULL, 'h'},
         {"verbose", optional_argument, NULL, 'v'},
-        {"stlink_version", required_argument, NULL, 's'},
-        {"stlinkv1", no_argument, NULL, '1'},
         {"listen_port", required_argument, NULL, 'p'},
         {"multi", optional_argument, NULL, 'm'},
         {"no-reset", optional_argument, NULL, 'n'},
@@ -123,7 +112,6 @@ int parse_options(int argc, char** argv, st_state_t *st) {
         "  -V, --version\t\tPrint the version\n"
         "  -vXX, --verbose=XX\tSpecify a specific verbosity level (0..99)\n"
         "  -v, --verbose\t\tSpecify generally verbose logging\n"
-        "  -s X, --stlink_version=X\n"
         "\t\t\tChoose what version of stlink to use, (defaults to 2)\n"
         "  -1, --stlinkv1\tForce stlink version 1\n"
         "  -p 4242, --listen_port=1234\n"
@@ -139,7 +127,7 @@ int parse_options(int argc, char** argv, st_state_t *st) {
         "  --serial <serial>\n"
         "\t\t\tUse a specific serial number.\n"
         "\n"
-        "The STLINKv2 device to use can be specified in the environment\n"
+        "The STLINK device to use can be specified in the environment\n"
         "variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.\n"
         "\n"
         ;
@@ -148,7 +136,7 @@ int parse_options(int argc, char** argv, st_state_t *st) {
     int option_index = 0;
     int c;
     int q;
-    while ((c = getopt_long(argc, argv, "hv::s:1p:mn", long_options, &option_index)) != -1) {
+    while ((c = getopt_long(argc, argv, "hv::p:mn", long_options, &option_index)) != -1) {
         switch (c) {
             case 0:
                 break;
@@ -163,17 +151,6 @@ int parse_options(int argc, char** argv, st_state_t *st) {
                     st->logging_level = DEBUG_LOGGING_LEVEL;
                 }
                 break;
-            case '1':
-                st->stlink_version = 1;
-                break;
-            case 's':
-                sscanf(optarg, "%i", &q);
-                if (q < 0 || q > 2) {
-                    fprintf(stderr, "stlink version %d unknown!\n", q);
-                    exit(EXIT_FAILURE);
-                }
-                st->stlink_version = q;
-                break;
             case 'p':
                 sscanf(optarg, "%i", &q);
                 if (q < 0) {
@@ -225,13 +202,12 @@ int main(int argc, char** argv) {
     memset(&state, 0, sizeof(state));
 
     // set defaults...
-    state.stlink_version = 2;
     state.logging_level = DEFAULT_LOGGING_LEVEL;
     state.listen_port = DEFAULT_GDB_LISTEN_PORT;
     state.reset = 1;    /* By default, reset board */
     parse_options(argc, argv, &state);
 
-    printf("st-util %s\n", STLINK_VERSION);
+    printf("st-util\n");
 
     sl = do_connect(&state);
     if (sl == NULL) return 1;