Skip to content

Gosund SP1

Jump to bottom
Michael Ingraham edited this page Sep 28, 2019 · 13 revisions

Purchase

There are several clones of this device -- use the Teckin device:

  • Gosund SP1 (Version 2.3 and 2.4)
    • To configure select Gosund SP1 v23 (55) or console command Module 55
  • BlitzWolf SHP2 (Version 2.3 and 2.4)

Calibration

If you have another (better) volt and power meter, this procedure should increase the precision. Use an incandescent bulb or an iron. In the web UI Console, enter the (correct) readings using the following commands:

Backlog VoltageSet <voltage>; CurrentSet <current>; PowerSet <wattage>

Details

Board - copy from issues/4303

Pins - copy from issues/4303

GPIO 0 - copy from issues/4303

More pictures

Wiki has moved to link on the left.

Clone this wiki locally