Add Infill Fan Speed Override #3271
Comments
|
Actually you can set low or zero default speed and 100% for every other parts. Though it seems have bug in some cases #3608. |
supermerill
added a commit
that referenced
this issue
Nov 14, 2023
. now easier to add new control and do complicate stuff in the cooling buffer. . less overall number of lines of code for better results. . add 6 new fan control. . now if the disable_fan_first_layers is at 0 and full_fan_speed_layer at more than 1, the first layer has some fan speed. . updated fan speeds that cannot be increased even with low layer time (top solid, ironing, support, support interface) . updated fan speeds that cannot be reduced by full_fan_speed_layer (bridge, infill bridge, overhangs, support interface) . updated extrusion speed that can't be reduced (overhang, bridge) . updated extrusion speed that shouldn't be reduced if possible (external, ironing, infill bridge, thin wall, support interface) . better name for CoolingBuffer::process_layer variables #3735 #3608 #3568 #3415 #3408 #3380 #3367 #3361 #3271 #3152 #2872 #2696 #2419 #2326
legend069
pushed a commit
to legend069/SuperSlicer
that referenced
this issue
Nov 19, 2023
. now easier to add new control and do complicate stuff in the cooling buffer. . less overall number of lines of code for better results. . add 6 new fan control. . now if the disable_fan_first_layers is at 0 and full_fan_speed_layer at more than 1, the first layer has some fan speed. . updated fan speeds that cannot be increased even with low layer time (top solid, ironing, support, support interface) . updated fan speeds that cannot be reduced by full_fan_speed_layer (bridge, infill bridge, overhangs, support interface) . updated extrusion speed that can't be reduced (overhang, bridge) . updated extrusion speed that shouldn't be reduced if possible (external, ironing, infill bridge, thin wall, support interface) . better name for CoolingBuffer::process_layer variables supermerill#3735 supermerill#3608 supermerill#3568 supermerill#3415 supermerill#3408 supermerill#3380 supermerill#3367 supermerill#3361 supermerill#3271 supermerill#3152 supermerill#2872 supermerill#2696 supermerill#2419 supermerill#2326
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Is your feature request related to a problem? Please describe.
Infill layer adhesion is more important than print quality and lowering cooling on the internal structure of the print should have little effect on the outward appearance as long as you have enough perimeters and increase the rigidity/strength of the part so it would be nice if you could lower or disable the part cooling fan for infill. This might also slightly lower the warping potential of large ABS prints by keeping the internal plastic slightly warmer.
Describe the solution you'd like
Adjust fan speed specifically for infill.
Describe how it would work
Option in
Filament Settings > Fan speed - defaultjust like Top fan speed, External perimeter fan speed, and Support interface fan speed.Could also add a check box to include solid layers or have it be its own setting as well.
The text was updated successfully, but these errors were encountered: