This a custom component for Home Assistant.
The livebox integration allows you to observe and control Livebox router.
There is currently support for the following device types within Home Assistant:
- Sensor with traffic metrics
- Binary Sensor with wan status , public ip , private ip
- Device tracker for connected devices (via option add wired devices)
- Switch for enable/disable Wireless
- Press button to restart box
- Press button to ring phone
The preferred way to setup the Orange Livebox platform is by enabling the discovery component. Add your device via the Integration menu
You must have set a password for your Livebox router web administration page.
The first time Home Assistant will connect to your Livebox, you will need to specify the password of livebox.
Only the routers with Livebox OS are supported:
- Livebox v3
- Livebox v4 (not tested)
- Livebox v5 (not tested)
This platform offers presence detection by keeping track of the devices connected to a Livebox router.
Ability to disable this option by integration options
Note that the Livebox waits for some time before marking a device as inactive, meaning that there will be a small delay (1 or 2 minutes) between the time you disconnect a device and the time it will appear as "away" in Home Assistant.
You should take this into account when specifying the consider_home parameter.
On the contrary, the Livebox immediately reports devices newly connected, so they should appear as "home" almost instantly, as soon as Home Assistant refreshes the devices states.
This platform offers you sensors to monitor a Livebox router. The monitored conditions are instant upload and download rates in Mb/s.