Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP

Home

methoxid edited this page · 10 revisions
Clone this wiki locally

Welcome to the stlink wiki!

Misc: Windows pre-compiled binaries are available at http://www.emb4fun.de/archive/stlink/index.html

FAQ: Q: Where can I get help? Is there a forum or maybe a mailing list?

A: todo

Q: How can I install stlink and flash binaries on Mac OS X ?

A: *20140811: * installed on Mac OS X 10.9.4 with ports method, however STlink v2 does not seem to work with libusb if you upgrade to the newest firmware !! Only older firmware on STlink v2 works.

https://coderwall.com/p/oznj_q

sudo port install libusb automake autoconf pkgconfig

aclocal --force -I /opt/local/share/aclocal

git clone https://github.com/texane/stlink.git stlink-utility

cd stlink-utility

./autogen.sh

./configure

make

Then trying to flash the image with STLINK v2 :

./st-flash write ~/Downloads/irq.bin 0x8000000

libusb_handle_events() timeout

[!] send_recv

After downgrading the firmware, flashing works ST-Link/V2 debugger with downgraded V2.14.3 firmware: https://drive.google.com/folderview?id=0Bzv7UpKpOQhnbXJVVEg4VUo2M1k as described here: http://community.spark.io/t/how-to-flash-a-brand-new-freshly-soldered-stm32f103-chip/3906

./st-flash write ~/Downloads/irq.bin 0x8000000

2014-08-11T23:14:52 INFO src/stlink-common.c: Loading device parameters....

2014-08-11T23:14:52 INFO src/stlink-common.c: Device connected is: F1 Medium-density device, id 0x20036410

2014-08-11T23:14:52 INFO src/stlink-common.c: SRAM size: 0x5000 bytes (20 KiB), Flash: 0x20000 bytes (128 KiB) in pages of 1024 bytes

2014-08-11T23:14:52 INFO src/stlink-common.c: Attempting to write 24904 (0x6148) bytes to stm32 address: 134217728 (0x8000000)

Flash page at addr: 0x08006000 erased

2014-08-11T23:14:53 INFO src/stlink-common.c: Finished erasing 25 pages of 1024 (0x400) bytes

2014-08-11T23:14:53 INFO src/stlink-common.c: Starting Flash write for VL/F0 core id

2014-08-11T23:14:53 INFO src/stlink-common.c: Successfully loaded flash loader in sram 24/24 pages written

2014-08-11T23:14:54 INFO src/stlink-common.c: Starting verification of write complete

2014-08-11T23:14:54 INFO src/stlink-common.c: Flash written and verified! jolly good!

Installation of openOCD on Mac OS X with STlink-v2 has been successful:

sudo port install openocd +jlink +stlink +ft2232

/opt/local/bin/openocd --version

Open On-Chip Debugger 0.7.0 (2014-08-11-22:12)

openocd -f /opt/local/share/openocd/scripts/interface/stlink-v2.cfg -f /opt/local/share/openocd/scripts/target/stm32f1x_stlink.cfg

Open On-Chip Debugger 0.8.0 (2014-08-11-15:36)

Licensed under GNU GPL v2

For bug reports, read

http://openocd.sourceforge.net/doc/doxygen/bugs.html

Info : This adapter doesn't support configurable speed

Info : STLINK v2 JTAG v21 API v2 SWIM v4 VID 0x0483 PID 0x3748

Info : using stlink api v2

Info : Target voltage: 3.244269

Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints

and connecting to the server through telnet yields a successful installation

telnet localhost 4444

Connected to localhost.

Escape character is '^]'.

Open On-Chip Debugger

Something went wrong with that request. Please try again.