Adds Makefile for stl generation

All_the_stls.scad

@@ -0,0 +1,92 @@
+include <measured_numbers.scad>
+include <util.scad>
+include <design_numbers.scad>
+use <Nema17_and_Ramps_and_bearings.scad>
+use <Gears.scad>
+use <render_parts.scad>
+use <parts.scad>
+
+// This file does all the little rotations and sets all the flags appropriate for generating printable stls for the Hangprinter v2
+
+the_part = "";
+
+if(the_part == "Bottom_plate_qty_1"){
+  rotate([0,0,15])
+    bottom_plate();
+}
+
+if(the_part == "Fancy_Ramps_holder_qty_1"){
+  Fancy_Ramps_holder();
+}
+
+if(the_part == "Mirrored_worm_disc_w_torx_qty_1"){
+  rotate([180,0,0])
+    sandwich_gear(worm=true);
+}
+
+if(the_part == "Mirrored_worm_qty_1"){
+  worm(step=0.07);
+}
+
+if(the_part == "Motor_gear_A_qty_1"){
+  rotate([180,0,0])
+    motor_gear_a();
+}
+
+if(the_part == "Motor_gear_B_qty_1"){
+  rotate([180,0,0])
+    motor_gear_b();
+}
+
+if(the_part == "Motor_gear_C_qty_1"){
+  rotate([180,0,0])
+    motor_gear_c();
+}
+
+if(the_part == "Sandwich_gear_w_torx_qty_3"){
+  rotate([180,0,0])
+    sandwich_gear(worm=false);
+}
+
+if(the_part == "Sandwich_spacer_qty_4"){
+  sandwich_spacer(Sandwich_spacer_radius_1, Sandwich_spacer_radius_2, Sandwich_spacer_height);
+}
+
+if(the_part == "Side_plate_left_qty_1"){
+  side_plate3();
+}
+
+if(the_part == "Side_plate_right_qty_1"){
+  mirror([1,0,0])
+    side_plate3();
+}
+
+if(the_part == "Side_plate_straight_qty_1"){
+  side_plate2();
+}
+
+if(the_part == "Snelle_w_torx_qty_4"){
+  snelle();
+}
+
+if(the_part == "Top_plate_qty_1"){
+  rotate([180,0,15])
+    top_plate();
+}
+
+if(the_part == "Sstruder_v2_adjustment_cylinder_qty_1"){
+  sstruder_plate(only_pressblock_cyl=true);
+}
+
+if(the_part == "Sstruder_v2_lever_qty_1"){
+  rotate([-90,0,0])
+    sstruder_lever(false);
+}
+
+if(the_part == "Sstruder_v2_plate_qty_1"){
+  sstruder_plate(false);
+}
+
+if(the_part == "Sstruder_v2_pressblock_handle_qty_1"){
+  sstruder_plate(only_pressblock_handle=true);
+}

Makefile

@@ -0,0 +1,36 @@
+.SUFFIXES:
+.SUFFIXES: .scad .stl
+
+STL_DIR = ./stl
+
+$(STL_DIR)/%.stl: All_the_stls.scad parts.scad measured_numbers.scad util.scad design_numbers.scad Nema17_and_Ramps_and_bearings.scad Gears.scad
+	openscad -o $@ -D 'the_part="$(basename $(notdir $@))"' All_the_stls.scad
+
+all: | $(STL_DIR) $(STL_DIR)/Bottom_plate_qty_1.stl \
+	$(STL_DIR)/Bottom_plate_qty_1.stl \
+	$(STL_DIR)/Fancy_Ramps_holder_qty_1.stl \
+	$(STL_DIR)/Mirrored_worm_disc_w_torx_qty_1.stl \
+	$(STL_DIR)/Mirrored_worm_qty_1.stl \
+	$(STL_DIR)/Motor_gear_A_qty_1.stl \
+	$(STL_DIR)/Motor_gear_B_qty_1.stl \
+	$(STL_DIR)/Motor_gear_C_qty_1.stl \
+	$(STL_DIR)/Sandwich_gear_w_torx_qty_3.stl \
+	$(STL_DIR)/Sandwich_spacer_qty_4.stl \
+	$(STL_DIR)/Side_plate_left_qty_1.stl \
+	$(STL_DIR)/Side_plate_right_qty_1.stl \
+	$(STL_DIR)/Side_plate_straight_qty_1.stl \
+	$(STL_DIR)/Snelle_w_torx_qty_4.stl \
+	$(STL_DIR)/Top_plate_qty_1.stl \
+	$(STL_DIR)/Sstruder_v2_adjustment_cylinder_qty_1.stl \
+	$(STL_DIR)/Sstruder_v2_lever_qty_1.stl \
+	$(STL_DIR)/Sstruder_v2_plate_qty_1.stl \
+	$(STL_DIR)/Sstruder_v2_pressblock_handle_qty_1.stl
+
+
+$(STL_DIR):
+	@echo "Creating STL_DIR $(STL_DIR)"
+	mkdir -p $@
+
+.PHONY: all
+
+