Infrared remote library for ESP8266/ESP32: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
-
Updated
Jun 6, 2024 - C++
Infrared remote library for ESP8266/ESP32: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
Arduino library to control Mitsubishi Heat Pumps via connector cn105
ESPHome Climate Component for Mitsubishi Heatpumps using direct serial connection
Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may…
ESPHome component for AUX based air conditioners. Direct wifi control of HVAC by ESPHome and Home Assistant. HVAC status and command feedback are available.
ThermTerm: an open source heat pump controller and home automation terminal, built on ESP32
Wired controller for LG HVAC units using ESPHome and ESP32
OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microcontroller
Home Assistant OpenTherm Thermostat
ESPHome Component for Daikin Mini-Splits using the S21 serial port.
This library can make Arduino/NodeMCU communicate with Toshiba/Carrier HVAC System via serial communication through wifi adapter port.
ATC BLE Thermometer repeater
Home Climate Control ESP32 based edge device firmware
Add a description, image, and links to the hvac topic page so that developers can more easily learn about it.
To associate your repository with the hvac topic, visit your repo's landing page and select "manage topics."