Skip to content

tork-a/jog_control

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Overview Build Status

ROS and MoveIt! are very powerful tools for industrial manipulators. Many people use ROS packages to control their own industrial manipulators. You can see many manipulators are available on ROS-Industrial project.

However, ROS has several missing features for industrial usage. The one is "jogging". Jogging is to make the actual robot move by small amount of distance. We can repeat jogging to adjust the robot to teach target position and posture.

Most commercial industrial robots have their own jog control in the teaching pendants. Some ROS oriented robot has no teaching pendant and no jog control, so it can be a big barrier to use ROS for industrial usage.

This jog_control repositry has packages for jog control (reasonably). You can jog your robot by rviz jog panel, joypads, keyboards, and teaching pendants using these packages.

Quick start

You can see the idea of jog_control package by demo in jog_launch package. It uses simulation and MoveIt!. Some robots are from ROS-Industrial repositry, which you need to build from source code.

How to install

Install from binary (in the future)

This package is not released yet. When it is released, you can install by apt command.

$ apt install ros-kinetic-jog-control

Install from source

$ source /opt/ros/kinetic/setup.bash
$ mkdir -p ws/src
$ cd ws
$ wstool init src
$ wstool set -t src jog_control --git http://github.com/tork-a/jog_control
$ wstool update -t src
$ rosdep install -r --from-path src --ignore-src
$ catkin build
$ source devel/setup.bash

UR3 and UR5(Gazebo and MoveIt!)

UR5 jog control

Launch simulation and MoveIt! (Replace ur5 to ur3 if you need)

$ roslaunch ur_gazebo ur5_joint_limited.launch
$ roslaunch ur5_moveit_config ur5_moveit_planning_execution.launch sim:=true
$ roslaunch ur5_moveit_config moveit_rviz.launch config:=true

And launch jog nodes.

$ roslaunch jog_launch ur5.launch

UR5(fake_joint)

You can use fake_joint package to use the perfect joint controller. Just launch:

$ roslaunch jog_launch ur5.launch use_fake_joint:=true use_moveit:=true use_rviz:=true

TRA1 (Simulation mode)

TRA1 jog control

Launch simulation and MoveIt!

$ roslaunch tra1_bringup tra1_bringup.launch simulation:=true
$ roslaunch tra1_bringup tra1_moveit.launch 

And launch jog nodes.

$ roslaunch jog_launch tra1.launch

TRA1 (fake_joint)

You can use fake_joint package to use the perfect joint controller. Just launch:

$ roslaunch jog_launch tra1.launch use_fake_joint:=true use_moveit:=true use_rviz:=true

Denso VS060

Denso VS060 jog control

Launch simulation and MoveIt!

$ roslaunch denso_launch denso_vs060_moveit_demo_simulation.launch 

And launch jog nodes.

$ roslaunch jog_launch vs060.launch

NEXTAGE Open (OpenRTM simulation)

NEXTAGE Open jog control

Launch simulation and MoveIt!

$ rtmlaunch nextage_ros_bridge nextage_ros_bridge_simulation.launch
$ roslaunch nextage_moveit_config moveit_planning_execution.launch 

And launch jog nodes.

$ roslaunch jog_launch nextage.launch

NEXTAGE Open (fake_joint)

You can use fake_joint package to use the perfect joint controller. Just launch:

$ roslaunch jog_launch nextage.launch use_fake_joint:=true use_moveit:=true

ABB IRB2400

ABB IRB2400 jog control

(CAUTION: The model of this robot is a bit strange in joint limits. The jog may not move because of joints flipping.)

Launch simulation and MoveIt!

$ roslaunch abb_irb2400_moveit_config moveit_planning_execution.launch 

And launch jog nodes.

$ roslaunch jog_launch abb_irb2400.launch 

MOTOMAN SIA20D

MOTOMAN SIA20D jog control

Launch simulation and MoveIt!

$ roslaunch motoman_sia20d_moveit_config moveit_planning_execution.launch sim:=true

And launch jog nodes.

$ roslaunch jog_launch motoman_sia20d.launch

MOTOMAN SDA10F

MOTOMAN SDA10F jog control

This is another dual arm robot by Yaskawa MOTOMAN.

Launch simulation and MoveIt!

$ roslaunch motoman_sda10f_moveit_config moveit_planning_execution.launch sim:=true

And launch jog nodes.

$ roslaunch jog_launch motoman_sda10f.launch 

CRANE-X7

CRANE-X7_jog_control

The CRANE-X7 package is here.

Launch simulation and MoveIt!

$ roslaunch crane_x7_gazebo crane_x7_with_table.launch

And launch jog nodes.

$ roslaunch jog_launch crane_x7.launch

rviz JogFramePanel Pugin

You ca add new panel JogFramePanel in rviz.

Joypad control

You can also use a joypad. Please consult jog_controller/README.md

SpaceMouse control

You can also use a SpaceMouse. Please consult jog_controller/README.md

Teaching pendant

You can also use a teaching pendant. TBA.

Packages

jog_msgs is a ROS message package for jog control.

jog_controller contains ROS nodes for jog control.

CAUTION

  • Please take extra care when you use this package with real robot, seriously!
  • You need to launch MoveIt! before start jog_controllers

TODO

  • Wiser target picking (group name, target link, etc)
  • Marker visualization for target link and base link
  • Dynamic reconfigure for jog_controller