IDE: Fix platform device registration in Swarm IDE driver (v2)

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

arch/mips/sibyte/swarm/Makefile

@@ -1,3 +1,4 @@
-obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y				:= platform.o setup.o rtc_xicor1241.o \
+				   rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o

arch/mips/sibyte/swarm/platform.c

@@ -0,0 +1,81 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME	"pata-swarm"
+
+#define SWARM_IDE_SHIFT	5
+#define SWARM_IDE_BASE	0x1f0
+#define SWARM_IDE_CTRL	0x3f6
+
+static struct resource swarm_pata_resource[] = {
+	{
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_IRQ,
+		.start	= K_INT_GB_IDE,
+		.end	= K_INT_GB_IDE,
+	},
+};
+
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift	= SWARM_IDE_SHIFT,
+};
+
+static struct platform_device swarm_pata_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.resource	= swarm_pata_resource,
+	.num_resources	= ARRAY_SIZE(swarm_pata_resource),
+	.dev  = {
+		.platform_data		= &pata_platform_data,
+		.coherent_dma_mask	= ~0,	/* grumble */
+	},
+};
+
+static int __init swarm_pata_init(void)
+{
+	u8 __iomem *base;
+	phys_t offset, size;
+	struct resource *r;
+
+	if (!SIBYTE_HAVE_IDE)
+		return -ENODEV;
+
+	base = ioremap(A_IO_EXT_BASE, 0x800);
+	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+	iounmap(base);
+
+	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+		pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
+
+		return -EBUSY;
+	}
+
+	pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
+
+	r = swarm_pata_resource;
+	r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
+	r[0].end   = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
+	r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
+	r[1].end   = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
+
+	return platform_device_register(&swarm_pata_device);
+}
+
+device_initcall(swarm_pata_init);

drivers/ide/Kconfig

@@ -780,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC
 	  to transfer data to and from memory.  Saying Y is safe and improves
 	  performance.
 
-config BLK_DEV_IDE_SWARM
-	tristate "IDE for Sibyte evaluation boards"
-	depends on SIBYTE_SB1xxx_SOC
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200

drivers/ide/mips/Makefile

@@ -1,4 +1,3 @@
-obj-$(CONFIG_BLK_DEV_IDE_SWARM)		+= swarm.o
 obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
 
 EXTRA_CFLAGS    := -Idrivers/ide