nil #257

gdalbeniz · 2016-02-17T14:55:04Z

update

lkl: Direct irq and fix direct syscall degration

Since d2852a2 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e7 ("bpf: fix unlocking of jited image when module ronx not set") that uses the former, Fengguang reported random corruptions on his i386 test machine [1]. On i386 there is no JIT available, and since his kernel config doesn't have kernel modules enabled, there was also no DEBUG_SET_MODULE_RONX enabled before which would set interpreted bpf_prog image as read-only like we do in various other cases for quite some time now, e.g. x86_64, arm64, etc. Thus, the difference with above commits was that we now used set_memory_ro() and set_memory_rw() on i386, which resulted in these issues. When reproducing this with Fengguang's config and qemu image, I changed lib/test_bpf.c to be run during boot instead of relying on trinity to fiddle with cBPF. The issues I saw with the BPF test suite when set_memory_ro() and set_memory_rw() is used to write protect image on i386 is that after a number of tests I noticed a corruption happening in bpf_prog_realloc(). Specifically, fp_old's content gets corrupted right *after* the (unrelated) __vmalloc() call and contains only zeroes right after the call instead of the original prog data. fp_old should have been freed later on via __bpf_prog_free() *after* we copied all the data over to the newly allocated fp. Result looks like: [...] [ 13.107240] test_bpf: torvalds#249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:0 17 PASS [ 13.108182] test_bpf: torvalds#250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:0 17 PASS [ 13.109206] test_bpf: torvalds#251 JMP_JA: Jump, gap, jump, ... jited:0 16 PASS [ 13.110493] test_bpf: torvalds#252 BPF_MAXINSNS: Maximum possible literals jited:0 12 PASS [ 13.111885] test_bpf: torvalds#253 BPF_MAXINSNS: Single literal jited:0 8 PASS [ 13.112804] test_bpf: torvalds#254 BPF_MAXINSNS: Run/add until end jited:0 6341 PASS [ 13.177195] test_bpf: torvalds#255 BPF_MAXINSNS: Too many instructions PASS [ 13.177689] test_bpf: torvalds#256 BPF_MAXINSNS: Very long jump jited:0 9 PASS [ 13.178611] test_bpf: torvalds#257 BPF_MAXINSNS: Ctx heavy transformations [ 13.178713] BUG: unable to handle kernel NULL pointer dereference at 00000034 [ 13.179740] IP: bpf_prog_realloc+0x5b/0x90 [ 13.180017] *pde = 00000000 [ 13.180017] [ 13.180017] Oops: 0002 [#1] DEBUG_PAGEALLOC [ 13.180017] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.0-57268-gd627975-dirty torvalds#50 [ 13.180017] task: 401ec000 task.stack: 401f2000 [ 13.180017] EIP: bpf_prog_realloc+0x5b/0x90 [ 13.180017] EFLAGS: 00210246 CPU: 0 [ 13.180017] EAX: 00000000 EBX: 57ae1000 ECX: 00000000 EDX: 57ae1000 [ 13.180017] ESI: 00000019 EDI: 57b07000 EBP: 401f3e74 ESP: 401f3e68 [ 13.180017] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 13.180017] CR0: 80050033 CR2: 00000034 CR3: 12cb1000 CR4: 00000610 [ 13.180017] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 13.180017] DR6: fffe0ff0 DR7: 00000400 [ 13.180017] Call Trace: [ 13.180017] bpf_prepare_filter+0x317/0x3a0 [ 13.180017] bpf_prog_create+0x65/0xa0 [ 13.180017] test_bpf_init+0x1ca/0x628 [ 13.180017] ? test_hexdump_init+0xb5/0xb5 [ 13.180017] do_one_initcall+0x7c/0x11c [...] When using trinity from Fengguang's reproducer, the corruptions were at inconsistent places, presumably from code dealing with allocations and seeing similar effects as mentioned above. Not using set_memory_ro() and set_memory_rw() lets the test suite run just fine as expected, thus it looks like using set_memory_*() on i386 seems broken and mentioned commits just uncovered it. Also, for checking, I enabled DEBUG_RODATA_TEST for that kernel. Latter shows that memory protecting the kernel seems not working either on i386 (!). Test suite output: [...] [ 12.692836] Write protecting the kernel text: 13416k [ 12.693309] Write protecting the kernel read-only data: 5292k [ 12.693802] rodata_test: test data was not read only [...] Work-around to not enable ARCH_HAS_SET_MEMORY for i386 is not optimal as it doesn't fix the issue in presumably broken set_memory_*(), but it at least avoids people avoid having to deal with random corruptions that are hard to track down for the time being until a real fix can be found. [1] https://lkml.org/lkml/2017/3/2/648 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexei Starovoitov <ast@kernel.org>

The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f027e0b ] The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [MIPS#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty torvalds#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

WARNING: please, no spaces at the start of a line torvalds#250: FILE: kernel/cgroup/cgroup.c:4554: + {$ ERROR: code indent should use tabs where possible torvalds#251: FILE: kernel/cgroup/cgroup.c:4555: + .name = "cpu.pressure",$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: kernel/cgroup/cgroup.c:4555: + .name = "cpu.pressure",$ ERROR: code indent should use tabs where possible torvalds#252: FILE: kernel/cgroup/cgroup.c:4556: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: kernel/cgroup/cgroup.c:4556: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#253: FILE: kernel/cgroup/cgroup.c:4557: + .seq_show = cgroup_cpu_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: kernel/cgroup/cgroup.c:4557: + .seq_show = cgroup_cpu_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: kernel/cgroup/cgroup.c:4558: + },$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: kernel/cgroup/cgroup.c:4559: + {$ ERROR: code indent should use tabs where possible torvalds#256: FILE: kernel/cgroup/cgroup.c:4560: + .name = "memory.pressure",$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: kernel/cgroup/cgroup.c:4560: + .name = "memory.pressure",$ ERROR: code indent should use tabs where possible torvalds#257: FILE: kernel/cgroup/cgroup.c:4561: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: kernel/cgroup/cgroup.c:4561: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#258: FILE: kernel/cgroup/cgroup.c:4562: + .seq_show = cgroup_memory_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: kernel/cgroup/cgroup.c:4562: + .seq_show = cgroup_memory_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: kernel/cgroup/cgroup.c:4563: + },$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: kernel/cgroup/cgroup.c:4564: + {$ ERROR: code indent should use tabs where possible torvalds#261: FILE: kernel/cgroup/cgroup.c:4565: + .name = "io.pressure",$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: kernel/cgroup/cgroup.c:4565: + .name = "io.pressure",$ ERROR: code indent should use tabs where possible torvalds#262: FILE: kernel/cgroup/cgroup.c:4566: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: kernel/cgroup/cgroup.c:4566: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: kernel/cgroup/cgroup.c:4567: + .seq_show = cgroup_io_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: kernel/cgroup/cgroup.c:4567: + .seq_show = cgroup_io_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: kernel/cgroup/cgroup.c:4568: + },$ WARNING: please, no spaces at the start of a line torvalds#322: FILE: kernel/sched/psi.c:424: + cgroup = task->cgroups->dfl_cgrp;$ WARNING: please, no spaces at the start of a line torvalds#323: FILE: kernel/sched/psi.c:425: + while (cgroup && (parent = cgroup_parent(cgroup))) {$ WARNING: suspect code indent for conditional statements (7, 15) torvalds#323: FILE: kernel/sched/psi.c:425: + while (cgroup && (parent = cgroup_parent(cgroup))) { + struct psi_group *group; ERROR: code indent should use tabs where possible torvalds#324: FILE: kernel/sched/psi.c:426: + struct psi_group *group;$ WARNING: please, no spaces at the start of a line torvalds#324: FILE: kernel/sched/psi.c:426: + struct psi_group *group;$ ERROR: code indent should use tabs where possible torvalds#326: FILE: kernel/sched/psi.c:428: + group = cgroup_psi(cgroup);$ WARNING: please, no spaces at the start of a line torvalds#326: FILE: kernel/sched/psi.c:428: + group = cgroup_psi(cgroup);$ ERROR: code indent should use tabs where possible torvalds#327: FILE: kernel/sched/psi.c:429: + psi_group_change(group, cpu, now, clear, set);$ WARNING: please, no spaces at the start of a line torvalds#327: FILE: kernel/sched/psi.c:429: + psi_group_change(group, cpu, now, clear, set);$ ERROR: code indent should use tabs where possible torvalds#329: FILE: kernel/sched/psi.c:431: + cgroup = parent;$ WARNING: please, no spaces at the start of a line torvalds#329: FILE: kernel/sched/psi.c:431: + cgroup = parent;$ WARNING: please, no spaces at the start of a line torvalds#330: FILE: kernel/sched/psi.c:432: + }$ WARNING: braces {} are not necessary for any arm of this statement torvalds#378: FILE: kernel/sched/psi.c:537: + if (task_on_rq_queued(task)) { [...] + } else if (task->in_iowait) { [...] total: 13 errors, 24 warnings, 334 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/psi-cgroup-support.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Johannes Weiner <jweiner@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

As part of the cma_dev release, that pointer will be set to NULL. In case it happens in rdma_bind_addr() (part of an error flow), the next call to addr_handler() will have a call to cma_acquire_dev_by_src_ip() which will overwrite sgid_attr without releasing it. WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_acquire_dev_by_src_ip+0x470/0x4b0 drivers/infiniband/core/cma.c:649 CPU: 2 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: ib_addr process_one_req RIP: 0010:cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] RIP: 0010:cma_acquire_dev_by_src_ip+0x470/0×4b0 drivers/infiniband/core/cma.c:649 Code: 66 d9 4a ff 4d 8b 6e 10 49 8d bd 1c 08 00 00 e8 b6 d6 4a ff 45 0f b6 bd 1c 08 00 00 41 83 e7 01 e9 49 fd ff ff e8 90 c5 29 ff <0f> 0b e9 80 fe ff ff e8 84 c5 29 ff 4c 89 f7 e8 2c d9 4a ff 4d 8b RSP: 0018:ffff8881047c7b40 EFLAGS: 00010293 RAX: ffff888104789c80 RBX: 0000000000000001 RCX: ffffffff820b8ef8 RDX: 0000000000000000 RSI: ffffffff820b9080 RDI: ffff88810cd4c998 RBP: ffff8881047c7c08 R08: ffff888104789c80 R09: ffffed10209f4036 R10: ffff888104fa01ab R11: ffffed10209f4035 R12: ffff88810cd4c800 R13: ffff888105750e28 R14: ffff888108f0a100 R15: ffff88810cd4c998 FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104e60005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: addr_handler+0x266/0×350 drivers/infiniband/core/cma.c:3190 process_one_req+0xa3/0×300 drivers/infiniband/core/addr.c:645 process_one_work+0x54c/0×930 kernel/workqueue.c:2272 worker_thread+0x82/0×830 kernel/workqueue.c:2418 kthread+0x1ca/0×220 kernel/kthread.c:292 ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296 Fixes: ff11c6c ("RDMA/cma: Introduce and use cma_acquire_dev_by_src_ip()") Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The current implementation of L2CAP options negotiation will continue the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown options"). Trying to continue the negotiation without ERTM support will allow Bluetooth-capable XBox One controllers (notably models 1708 and 1797) to connect. btmon before patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#64 [hci0] 59.182702 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#65 [hci0] 59.182744 L2CAP: Configure Request (0x04) ident 3 len 15 Destination CID: 64 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#66 [hci0] 59.183948 L2CAP: Configure Request (0x04) ident 1 len 8 Destination CID: 64 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#67 [hci0] 59.183994 L2CAP: Configure Response (0x05) ident 1 len 10 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#69 [hci0] 59.187676 L2CAP: Configure Response (0x05) ident 3 len 7 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722 L2CAP: Disconnection Request (0x06) ident 4 len 4 Destination CID: 64 Source CID: 64 > ACL Data RX: Handle 256 flags 0x02 dlen 12 torvalds#73 [hci0] 59.192714 L2CAP: Disconnection Response (0x07) ident 4 len 4 Destination CID: 64 Source CID: 64 btmon after patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#248 [hci0] 103.502970 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection pending (0x0001) Status: No further information available (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#249 [hci0] 103.504184 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#250 [hci0] 103.504398 L2CAP: Configure Request (0x04) ident 6 len 15 Destination CID: 65 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#251 [hci0] 103.505472 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#252 [hci0] 103.505689 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#254 [hci0] 103.509165 L2CAP: Configure Response (0x05) ident 6 len 7 Source CID: 65 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#255 [hci0] 103.509426 L2CAP: Configure Request (0x04) ident 7 len 4 Destination CID: 65 Flags: 0x0000 < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#257 [hci0] 103.511870 L2CAP: Connection Request (0x02) ident 8 len 4 PSM: 1 (0x0001) Source CID: 66 > ACL Data RX: Handle 256 flags 0x02 dlen 14 torvalds#259 [hci0] 103.514121 L2CAP: Configure Response (0x05) ident 7 len 6 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de> Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de>

As part of the cma_dev release, that pointer will be set to NULL. In case it happens in rdma_bind_addr() (part of an error flow), the next call to addr_handler() will have a call to cma_acquire_dev_by_src_ip() which will overwrite sgid_attr without releasing it. WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_acquire_dev_by_src_ip+0x470/0x4b0 drivers/infiniband/core/cma.c:649 CPU: 2 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: ib_addr process_one_req RIP: 0010:cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] RIP: 0010:cma_acquire_dev_by_src_ip+0x470/0x4b0 drivers/infiniband/core/cma.c:649 Code: 66 d9 4a ff 4d 8b 6e 10 49 8d bd 1c 08 00 00 e8 b6 d6 4a ff 45 0f b6 bd 1c 08 00 00 41 83 e7 01 e9 49 fd ff ff e8 90 c5 29 ff <0f> 0b e9 80 fe ff ff e8 84 c5 29 ff 4c 89 f7 e8 2c d9 4a ff 4d 8b RSP: 0018:ffff8881047c7b40 EFLAGS: 00010293 RAX: ffff888104789c80 RBX: 0000000000000001 RCX: ffffffff820b8ef8 RDX: 0000000000000000 RSI: ffffffff820b9080 RDI: ffff88810cd4c998 RBP: ffff8881047c7c08 R08: ffff888104789c80 R09: ffffed10209f4036 R10: ffff888104fa01ab R11: ffffed10209f4035 R12: ffff88810cd4c800 R13: ffff888105750e28 R14: ffff888108f0a100 R15: ffff88810cd4c998 FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104e60005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: addr_handler+0x266/0x350 drivers/infiniband/core/cma.c:3190 process_one_req+0xa3/0x300 drivers/infiniband/core/addr.c:645 process_one_work+0x54c/0x930 kernel/workqueue.c:2272 worker_thread+0x82/0x830 kernel/workqueue.c:2418 kthread+0x1ca/0x220 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Fixes: ff11c6c ("RDMA/cma: Introduce and use cma_acquire_dev_by_src_ip()") Link: https://lore.kernel.org/r/20201213132940.345554-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

[ Upstream commit e246b7c ] As part of the cma_dev release, that pointer will be set to NULL. In case it happens in rdma_bind_addr() (part of an error flow), the next call to addr_handler() will have a call to cma_acquire_dev_by_src_ip() which will overwrite sgid_attr without releasing it. WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] WARNING: CPU: 2 PID: 108 at drivers/infiniband/core/cma.c:606 cma_acquire_dev_by_src_ip+0x470/0x4b0 drivers/infiniband/core/cma.c:649 CPU: 2 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: ib_addr process_one_req RIP: 0010:cma_bind_sgid_attr drivers/infiniband/core/cma.c:606 [inline] RIP: 0010:cma_acquire_dev_by_src_ip+0x470/0x4b0 drivers/infiniband/core/cma.c:649 Code: 66 d9 4a ff 4d 8b 6e 10 49 8d bd 1c 08 00 00 e8 b6 d6 4a ff 45 0f b6 bd 1c 08 00 00 41 83 e7 01 e9 49 fd ff ff e8 90 c5 29 ff <0f> 0b e9 80 fe ff ff e8 84 c5 29 ff 4c 89 f7 e8 2c d9 4a ff 4d 8b RSP: 0018:ffff8881047c7b40 EFLAGS: 00010293 RAX: ffff888104789c80 RBX: 0000000000000001 RCX: ffffffff820b8ef8 RDX: 0000000000000000 RSI: ffffffff820b9080 RDI: ffff88810cd4c998 RBP: ffff8881047c7c08 R08: ffff888104789c80 R09: ffffed10209f4036 R10: ffff888104fa01ab R11: ffffed10209f4035 R12: ffff88810cd4c800 R13: ffff888105750e28 R14: ffff888108f0a100 R15: ffff88810cd4c998 FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104e60005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: addr_handler+0x266/0x350 drivers/infiniband/core/cma.c:3190 process_one_req+0xa3/0x300 drivers/infiniband/core/addr.c:645 process_one_work+0x54c/0x930 kernel/workqueue.c:2272 worker_thread+0x82/0x830 kernel/workqueue.c:2418 kthread+0x1ca/0x220 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Fixes: ff11c6c ("RDMA/cma: Introduce and use cma_acquire_dev_by_src_ip()") Link: https://lore.kernel.org/r/20201213132940.345554-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

ucma_process_join() allocates struct ucma_multicast mc and frees it if an error occurs during its run. Specifically, if an error occurs in copy_to_user(), a use-after-free might happen in the following scenario: 1. mc struct is allocated. 2. rdma_join_multicast() is called and succeeds. During its run, rdma_join_multicast() enqueues a work that will later use the aforementioned mc struct. 3. copy_to_user() is called and fails. 4. mc struct is deallocated. 5. The work that was enqueued by rdma_join_multicast() is run and calls ucma_create_uevent() which tries to access mc struct (which is freed by now). We fix this bug by flushing the cma_wq workqueue. The following syzkaller report revealed it: BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108 CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: rdma_cm cma_work_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:118 print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562 ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349 cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977 cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718 process_one_work+0x54c/0×930 kernel/workqueue.c:2272 worker_thread+0x82/0×830 kernel/workqueue.c:2418 kthread+0x1ca/0×220 kernel/kthread.c:292 ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296 Allocated by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:461 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track+0x1c/0×30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0×160 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0xb3/0×3e0 mm/slub.c:4124 ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88810b3ad100 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff88810b3ad100, ffff88810b3ad1c0) The buggy address belongs to the page: page:00000000796da98e refcount:1 mapcount:0 mapping:0000000000000000 index:0×0 pfn:0×10b3ad flags: 0×8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000122 ffff888100043540 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810b3ad000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88810b3ad080: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88810b3ad100: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88810b3ad180: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88810b3ad200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: c8f6a36 ("RDMA/cma: Add multicast communication support") Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The current implementation of L2CAP options negotiation will continue the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown options"). Trying to continue the negotiation without ERTM support will allow Bluetooth-capable XBox One controllers (notably models 1708 and 1797) to connect. btmon before patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#64 [hci0] 59.182702 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#65 [hci0] 59.182744 L2CAP: Configure Request (0x04) ident 3 len 15 Destination CID: 64 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#66 [hci0] 59.183948 L2CAP: Configure Request (0x04) ident 1 len 8 Destination CID: 64 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#67 [hci0] 59.183994 L2CAP: Configure Response (0x05) ident 1 len 10 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#69 [hci0] 59.187676 L2CAP: Configure Response (0x05) ident 3 len 7 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722 L2CAP: Disconnection Request (0x06) ident 4 len 4 Destination CID: 64 Source CID: 64 > ACL Data RX: Handle 256 flags 0x02 dlen 12 torvalds#73 [hci0] 59.192714 L2CAP: Disconnection Response (0x07) ident 4 len 4 Destination CID: 64 Source CID: 64 btmon after patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#248 [hci0] 103.502970 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection pending (0x0001) Status: No further information available (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#249 [hci0] 103.504184 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#250 [hci0] 103.504398 L2CAP: Configure Request (0x04) ident 6 len 15 Destination CID: 65 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#251 [hci0] 103.505472 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#252 [hci0] 103.505689 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#254 [hci0] 103.509165 L2CAP: Configure Response (0x05) ident 6 len 7 Source CID: 65 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#255 [hci0] 103.509426 L2CAP: Configure Request (0x04) ident 7 len 4 Destination CID: 65 Flags: 0x0000 < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#257 [hci0] 103.511870 L2CAP: Connection Request (0x02) ident 8 len 4 PSM: 1 (0x0001) Source CID: 66 > ACL Data RX: Handle 256 flags 0x02 dlen 14 torvalds#259 [hci0] 103.514121 L2CAP: Configure Response (0x05) ident 7 len 6 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de> Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ucma_process_join() allocates struct ucma_multicast mc and frees it if an error occurs during its run. Specifically, if an error occurs in copy_to_user(), a use-after-free might happen in the following scenario: 1. mc struct is allocated. 2. rdma_join_multicast() is called and succeeds. During its run, cma_iboe_join_multicast() enqueues a work that will later use the aforementioned mc struct. 3. copy_to_user() is called and fails. 4. mc struct is deallocated. 5. The work that was enqueued by cma_iboe_join_multicast() is run and calls ucma_create_uevent() which tries to access mc struct (which is freed by now). Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast(). Since cma_work_handler() frees struct cma_work, we don't use it in cma_iboe_join_multicast() so we can safely cancel the work later. The following syzkaller report revealed it: BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108 CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: rdma_cm cma_work_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:118 print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562 ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349 cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977 cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718 process_one_work+0x54c/0×930 kernel/workqueue.c:2272 worker_thread+0x82/0×830 kernel/workqueue.c:2418 kthread+0x1ca/0×220 kernel/kthread.c:292 ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296 Allocated by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:461 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track+0x1c/0×30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0×160 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0xb3/0×3e0 mm/slub.c:4124 ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88810b3ad100 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff88810b3ad100, ffff88810b3ad1c0) The buggy address belongs to the page: page:00000000796da98e refcount:1 mapcount:0 mapping:0000000000000000 index:0×0 pfn:0×10b3ad flags: 0×8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000122 ffff888100043540 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810b3ad000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88810b3ad080: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88810b3ad100: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88810b3ad180: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88810b3ad200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b5de0c6 ("RDMA/cma: Fix use after free race in roce multicast join") Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The current implementation of L2CAP options negotiation will continue the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown options"). Trying to continue the negotiation without ERTM support will allow Bluetooth-capable XBox One controllers (notably models 1708 and 1797) to connect. btmon before patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#64 [hci0] 59.182702 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#65 [hci0] 59.182744 L2CAP: Configure Request (0x04) ident 3 len 15 Destination CID: 64 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#66 [hci0] 59.183948 L2CAP: Configure Request (0x04) ident 1 len 8 Destination CID: 64 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#67 [hci0] 59.183994 L2CAP: Configure Response (0x05) ident 1 len 10 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#69 [hci0] 59.187676 L2CAP: Configure Response (0x05) ident 3 len 7 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722 L2CAP: Disconnection Request (0x06) ident 4 len 4 Destination CID: 64 Source CID: 64 > ACL Data RX: Handle 256 flags 0x02 dlen 12 torvalds#73 [hci0] 59.192714 L2CAP: Disconnection Response (0x07) ident 4 len 4 Destination CID: 64 Source CID: 64 btmon after patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#248 [hci0] 103.502970 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection pending (0x0001) Status: No further information available (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#249 [hci0] 103.504184 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 torvalds#250 [hci0] 103.504398 L2CAP: Configure Request (0x04) ident 6 len 15 Destination CID: 65 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 torvalds#251 [hci0] 103.505472 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 torvalds#252 [hci0] 103.505689 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 torvalds#254 [hci0] 103.509165 L2CAP: Configure Response (0x05) ident 6 len 7 Source CID: 65 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#255 [hci0] 103.509426 L2CAP: Configure Request (0x04) ident 7 len 4 Destination CID: 65 Flags: 0x0000 < ACL Data TX: Handle 256 flags 0x00 dlen 12 torvalds#257 [hci0] 103.511870 L2CAP: Connection Request (0x02) ident 8 len 4 PSM: 1 (0x0001) Source CID: 66 > ACL Data RX: Handle 256 flags 0x02 dlen 14 torvalds#259 [hci0] 103.514121 L2CAP: Configure Response (0x05) ident 7 len 6 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de> Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ucma_process_join() allocates struct ucma_multicast mc and frees it if an error occurs during its run. Specifically, if an error occurs in copy_to_user(), a use-after-free might happen in the following scenario: 1. mc struct is allocated. 2. rdma_join_multicast() is called and succeeds. During its run, cma_iboe_join_multicast() enqueues a work that will later use the aforementioned mc struct. 3. copy_to_user() is called and fails. 4. mc struct is deallocated. 5. The work that was enqueued by cma_iboe_join_multicast() is run and calls ucma_create_uevent() which tries to access mc struct (which is freed by now). Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast(). Since cma_work_handler() frees struct cma_work, we don't use it in cma_iboe_join_multicast() so we can safely cancel the work later. The following syzkaller report revealed it: BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272 Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108 CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: rdma_cm cma_work_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:118 print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562 ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349 cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977 cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718 process_one_work+0x54c/0×930 kernel/workqueue.c:2272 worker_thread+0x82/0×830 kernel/workqueue.c:2418 kthread+0x1ca/0×220 kernel/kthread.c:292 ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296 Allocated by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:461 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track+0x1c/0×30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0×160 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0xb3/0×3e0 mm/slub.c:4124 ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88810b3ad100 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff88810b3ad100, ffff88810b3ad1c0) Fixes: b5de0c6 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

[ Upstream commit fe454dc ] ucma_process_join() allocates struct ucma_multicast mc and frees it if an error occurs during its run. Specifically, if an error occurs in copy_to_user(), a use-after-free might happen in the following scenario: 1. mc struct is allocated. 2. rdma_join_multicast() is called and succeeds. During its run, cma_iboe_join_multicast() enqueues a work that will later use the aforementioned mc struct. 3. copy_to_user() is called and fails. 4. mc struct is deallocated. 5. The work that was enqueued by cma_iboe_join_multicast() is run and calls ucma_create_uevent() which tries to access mc struct (which is freed by now). Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast(). Since cma_work_handler() frees struct cma_work, we don't use it in cma_iboe_join_multicast() so we can safely cancel the work later. The following syzkaller report revealed it: BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272 Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108 CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ torvalds#257 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: rdma_cm cma_work_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:118 print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562 ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272 ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349 cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977 cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718 process_one_work+0x54c/0×930 kernel/workqueue.c:2272 worker_thread+0x82/0×830 kernel/workqueue.c:2418 kthread+0x1ca/0×220 kernel/kthread.c:292 ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296 Allocated by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:461 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 359: kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48 kasan_set_track+0x1c/0×30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0×160 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0xb3/0×3e0 mm/slub.c:4124 ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497 ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538 ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724 vfs_write fs/read_write.c:603 [inline] vfs_write+0x191/0×4c0 fs/read_write.c:585 ksys_write+0x1a1/0×1e0 fs/read_write.c:658 do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88810b3ad100 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff88810b3ad100, ffff88810b3ad1c0) Fixes: b5de0c6 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Add a bigger batch of test coverage to assert correct operation of netkit devices and their BPF program management: # ./test_progs -t tc_netkit [...] [ 1.166267] bpf_testmod: loading out-of-tree module taints kernel. [ 1.166831] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270957] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.275336] clocksource: Switched to clocksource tsc torvalds#257 tc_netkit_basic:OK torvalds#258 tc_netkit_device:OK torvalds#259 tc_netkit_multi_links:OK torvalds#260 tc_netkit_multi_opts:OK torvalds#261 tc_netkit_neigh_links:OK Summary: 5/0 PASSED, 0 SKIPPED, 0 FAILED [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a bigger batch of test coverage to assert correct operation of netkit devices and their BPF program management: # ./test_progs -t tc_netkit [...] [ 1.166267] bpf_testmod: loading out-of-tree module taints kernel. [ 1.166831] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270957] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.275336] clocksource: Switched to clocksource tsc torvalds#257 tc_netkit_basic:OK torvalds#258 tc_netkit_device:OK torvalds#259 tc_netkit_multi_links:OK torvalds#260 tc_netkit_multi_opts:OK torvalds#261 tc_netkit_neigh_links:OK Summary: 5/0 PASSED, 0 SKIPPED, 0 FAILED [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20231024214904.29825-8-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hid_hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 Fixes: cd667ce ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi <be286@163.com>

hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hid_hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 Fixes: <cd667ce24796> (HID: use debugfs for events/reports dumping) Signed-off-by: Charles Yi <be286@163.com>

hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ] Fixes: cd667ce ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi <be286@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit fc43e9c ] hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ] Fixes: cd667ce ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi <be286@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>

Currently when packet is shrunk via bpf_xdp_adjust_tail(), null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appriopriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

Currently when packet is shrunk via bpf_xdp_adjust_tail(), null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appriopriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appriopriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit c511471 ] Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc43e9c ] hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ] Fixes: cd667ce ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi <be286@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>

Changes: * drm/bridge: synopsys: dw-hdmi: HDMI prioritize panel preferred resolution Signed-off-by: Stephen Chen <stephen@radxa.com>

Merge pull request #1 from torvalds/master

4f9a10b

update

gdalbeniz closed this Feb 17, 2016

gdalbeniz changed the title ~~update #2~~ nil Feb 17, 2016

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#257 from liuyuan10/dirq

468cb6e

lkl: Direct irq and fix direct syscall degration

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

nil #257

nil #257

gdalbeniz commented Feb 17, 2016

nil #257

nil #257

Conversation

gdalbeniz commented Feb 17, 2016