Behavioral Cloning Project

Overview

In this project, I used what I've learned about deep neural networks and convolutional neural networks to clone driving behavior. I trained, validated and tested a model using Keras. The model outputs a steering angle to an autonomous vehicle.

A simulator was provided where I steered a car around a track for data collection. I used image data and steering angles to train a neural network and then use this model to drive the car autonomously around the track.

The Project

The goals / steps of this project are the following:

• Use the simulator to collect data of good driving behavior
• Design, train and validate a model that predicts a steering angle from image data
• Use the model to drive the vehicle autonomously around the first track in the simulator. The vehicle should remain on the road for an entire loop around the track.
• Summarize the results with a written report

Dependencies

This lab requires:

• CarND Term1 Starter Kit

The lab enviroment can be created with CarND Term1 Starter Kit. Click here for the details.

Details About Files In This Directory

drive.py

Usage of drive.py requires you have saved the trained model as an h5 file, i.e. model.h5. See the Keras documentation for how to create this file using the following command:

model.save(filepath)

Once the model has been saved, it can be used with drive.py using this command:

python drive.py model.h5

The above command will load the trained model and use the model to make predictions on individual images in real-time and send the predicted angle back to the server via a websocket connection.

Note: There is known local system's setting issue with replacing "," with "." when using drive.py. When this happens it can make predicted steering values clipped to max/min values. If this occurs, a known fix for this is to add "export LANG=en_US.utf8" to the bashrc file.

Saving a video of the autonomous agent

python drive.py model.h5 run1

The fourth argument, run1, is the directory in which to save the images seen by the agent. If the directory already exists, it'll be overwritten.

ls run1

[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_424.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_451.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_477.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_528.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_573.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_618.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_697.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_723.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_749.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_817.jpg
...

The image file name is a timestamp of when the image was seen. This information is used by video.py to create a chronological video of the agent driving.

video.py

python video.py run1

Creates a video based on images found in the run1 directory. The name of the video will be the name of the directory followed by '.mp4', so, in this case the video will be run1.mp4.