Skip to content

Simulator of DSMR Fluvius S1 interface of smart meter - usefull when debugging S1 applications

License

Notifications You must be signed in to change notification settings

tribp/DSMR-Fluvius-S1-port-simulator

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

DSMR-Fluvius S1 port simulator

TOC:

  1. Why ?
  2. Intro
  3. Concept
  4. Use
  5. References

Remark this repo is only for ESP32 simulator. For ESP-S1 receiver see other repo!

1 Why ?

The S1 port of a smart meter in 'production' sends messages at 2Mbps of real measurements.

For testing or debugging applications that read those S1 telegrams it would be nice to:

  • control the speed of the telegrams
  • control the content of the fields of the telegrams.

Since a 'ESP32' microcontroller would be the perfect candidate for reading the S1 messages, it made sense to also use it to make a 'Smart meter S1 simulator'

2 Intro

2.1 S1 Interface

  • RS422: is a 'balanced signal (+ & -) with same voltage levels as RS 485. The difference with RS485 is that it is not a 'bus' with addressable devices like RS485, but only for 'point to point'. Advandage is that we can use a standard RS485 level converter like RS485 module
  • RJ12
  • S1 Protocol : HDLC. Only the message format of HDLC is used. This simply comes down to the fact that every telegram starts and stops with 0x7E, AKA 'tilde' ~. Practically we don't even need a specific 'HDLC' arduino library! We can avoid all of this and just make sure that every 'telegram' starts and stops with a tilde.(0x0F)

2.2 S1 telegram - Key figures

  • 52 samples per 50Hz cycle.
  • Sampling rate = 2600 Hz.
  • Telegram = 45 bytes of info
    • communication uses 8N1 = 1 start bit + 8 (info) bits + 1 stop bit = 10 bits / field
    • telegram = 45 bytes x 10 bits = 450 bits
    • Bitrate (fixed) = 2Mbps
      • 1 bit = 1 / 2Mbps = 0.5 us
      • telegram = 450 x 0.5us = 225 us.
    • Telegram - rate:
      • Fsampling = 2600 Hz
      • 1 telegram each 1/2600Hz = 384 us
  • Telegram message definition (see all details pag 10 - 16 of eMUCS standard)

Telegram Defenition Summary

E-MUCS Frame = 45 bytes
 *  Flag          = 1 byte
 *  Frame Format  = 2 bytes
 *  Address Field = 1 byte
 *  Control Field = 1 byte
 *  Data          = 37 bytes
 *  CRC           = 2 bytes
 *  Flag          = 1 byte

Details

/*E-MUCS Frame = 45 bytes
 *  Flag          = 1 byte = 0x7E
 *  Frame Format  = 2 bytes = Frame Type (byte 1=0x80) + Frame Lenght (byte 2 = fixed = 0x2B = 43 bytes
 *  Address Field = 1 byte = broadcast to all stations = 0xFF
 *  Control Field = 1 byte = 0x03
 *  Data          = 37 bytes
 *      Meter ID        = byte 6 to 19
 *      Additional Info = byte 20
 *        bit 0 = meter type (0 = single fase 1 = 3 fase)
 *        bit 1 = sampling type (per sec = O , per period =1)
 *        bit 2 = (3-wire = 0 , 4 wire = 1) only when 3 fase
 *        bit 3 = samples ok ( 0=corrupted, 1 = ok)
 *        bit 4 = neutral current measured ( 0=no, 1=yes)
 *        bit 5-7 = Dataformat version (default '000')
 *     Sampling freq = byte 21
 *        if fixed per second = multiples of 100hz
 *        if per period = number of samples for 1 period (can vary)
 *     Network freq = byte 22-23 = uInt in mHz (0xC3 0xBB = 50.096 Hz)
 *     Frame Seq Nr = byte 24
 *     Voltage L1 = byte 25-26 in 25 mV
 *        Voltage L1-MSB = byte 25
 *        Voltage L1-LSB = byte 26
 *     Current L1 = byte 27-29
 *        Current L1-MSB = byte 27
 *        Current L1     = byte 28
 *        Current L1-LSB = byte 29
 *     Voltage L2 = byte 30-31
 *     Current L2 = byte 32-34
 *     Voltage L3 = byte 35-36
 *     Current L3 = byte 37-39
 *     Current N  = byte 40-42
 *     FCS        = byte 43-44
 *        FCS-LSB = byte 43
 *        FCS-MSB = 44
 *    Flag (Closing)  = 1 byte
 */

2.3 components

Not needed for this simulator!

3 Concept

3.1 The physical aspect - "Layer 1 of the OSI model"

UART = Universal Asynchronous Receiver Decoder

  • Hardware UART of ESP32 is used. Not SofwareSerial because of performance!
    • ESP32 has 3 hardware UARTs (0/1/2)
      • Serial0 is for interface communication with PC and arduino IDE
      • Serial1 or Serial2 can be used - we use Serial1
        • RX and TX can be defined:
          • TX = PIN 17
          • RX = PIN 16 - not needed for SM simulator - only when decoding
        • baudrate = 2000000 = 2Mbps
        • 8N1 = 8 bit - no parity bit used - 1 stop bit
          • remark: 1 start bit = defacto needed.

3.2 Protocol HDLC - - "Layer 2 of the OSI model"

In this case "much about nothing" since we only use the HDLC Frame format principle - every telegram starts and ends with a tilde character (0x7E) -

Note:

  • green = ESP S1 simulator
  • yellow = S1 Fluvius smart meter in production

Timing between telegrams: 384 us. Start byte ~: (see under)

  • Start bit: 'high to low' and takes 0.5us (start @second division for green)
  • message 'start FLAG' = 0x7E (01111110) => startbit '0' + '01111110' + stopbit '0'
  • stop bit: 'low to high' and takes 0.5us

4 Use

Arduino source file can be changed to modify:

The standard source file sends a 'perfect 50Hz - 230V RMS - sinewave' with a 'real-life' smart meter interval at 384us.

Modifing timing between telegrams

  • Change 'TELEGRAMTIME':
    • use 370000 to simulate 'real' smart meter
    • use 20000000000 to send 1 telegram every 2 sec - eg for debugging your app.
    • use 20000000 to send 1 telegram every 20 ms -eg for total cycle - 52 samples debug.

Modifying 50 hz signal.

  • Change signal
    • standard = 1 perfect sinewave at 50Hz
    • you can manually modify:
      • Vp : amplitude of sinewave (remember this is in '25mv' increments!)
        • standard: 13010 (25mv) = 13010 x 25mV = 325250 mV = 325,25 V = SQRT(2) x 230V RMS.
      • add harmonics to test your DFT-frequency analysis at the receiver.
      • fix voltage values (V = byte 25-26) or (I = byte 27-29) to test receiver decoder functionality. This in order to check if values are conform example page 16 of eMUCS standard.

5 References.

Info only usefull when modifying TX signal in order to know what DFT will result at receiver.

About

Simulator of DSMR Fluvius S1 interface of smart meter - usefull when debugging S1 applications

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages