Skip to content
USB Rubber Ducky HID-only firmware with status indication
C Makefile C++ Other
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Debug
src
.gitattributes
Framework.config
README.md
duck.atsln
duck.atsuo
duck.avrgccproj
duck.avrsln
duck.avrsuo
duck.componentinfo.xml
duck.cproj
license.txt

README.md

Ducky_HID_WSI

USB Rubber Ducky HID-only firmware with status indication


Introduction

Ducky_HID_WSI is HID-only firmware for the USB Rubber Ducky based off of midnitesnake's firmware (https://github.com/hak5darren/USB-Rubber-Ducky/tree/master/Firmware/Source/Ducky_HID).
midnitesnake's GitHub: https://github.com/midnitesnake

This firmware is like the one that comes with the USB Rubber Ducky but it uses the LEDs to show when it's in the *injecting keystrokes* stage and when it's complete.

LED indications

Red with green slightly flashing :: keystroke injection stage
Flashing green :: starting; finished
Red :: unable to use/access file

Download

The firmware is available to download from the release section.
You can’t perform that action at this time.