Build scripts for Debian / Ubuntu

Makefile

@@ -33,8 +33,3 @@ install:
 	cp $(MINIPRO_QUERY_DB) $(BIN_DIR)
 	cp udev/rules.d/80-minipro.rules $(UDEV_RULES_DIR)
 	cp man/minipro.1 $(MAN_DIR)
-
-test: $(TESTS:.c=.stamp)
-	$(CC) -c -I. $< $(CFLAGS) -DTEST -o $(<:.c=.o)
-	$(OBJCOPY) --weaken $(<:.c=.o)
-	$(CC) $(LIBS) $(COMMON_OBJECTS) $(<:.c=.o) -o $(<:.c=)

debian/README.Debian

@@ -0,0 +1,6 @@
+minipro for Debian
+------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- minoru <minoru@unknown>  Tue, 25 Feb 2014 10:03:07 +0700

debian/README.source

@@ -0,0 +1,9 @@
+minipro for Debian
+------------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+

debian/changelog

@@ -0,0 +1,5 @@
+minipro (0.1-1) unstable; urgency=low
+
+  * Initial release
+
+ -- minoru <minoru@unknown>  Tue, 25 Feb 2014 10:03:07 +0700

debian/compat

@@ -0,0 +1 @@
+8

debian/control

@@ -0,0 +1,14 @@
+Source: minipro
+Section: universe/electronics
+Priority: extra
+Maintainer: Valentin Dudouyt <valentin.dudouyt@gmail.com>
+Build-Depends: debhelper (>= 8.0.0), libusb-1.0-0-dev
+Standards-Version: 3.9.4
+Homepage: https://github.com/vdudouyt/minipro
+Vcs-Git: git://github.com/vdudouyt/minipro
+Vcs-Browser: https://github.com/vdudouyt/minipro
+
+Package: minipro
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: software for Minipro TL866XX series of programmers from autoelectric.cn.

debian/copyright

@@ -0,0 +1,38 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: minipro
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: <special license>
+ <Put the license of the package here indented by 1 space>
+ <This follows the format of Description: lines in control file>
+ .
+ <Including paragraphs>
+
+# If you want to use GPL v2 or later for the /debian/* files use 
+# the following clauses, or change it to suit. Delete these two lines
+Files: debian/*
+Copyright: 2014 minoru <minoru@unknown>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid to pick license terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.

debian/docs

@@ -0,0 +1 @@
+README.md

debian/files

@@ -0,0 +1 @@
+minipro_0.1-1_i386.deb universe/electronics extra

debian/init.d.ex

@@ -0,0 +1,163 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          minipro
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: <Enter a short description of the software>
+# Description:       <Enter a long description of the software>
+#                    <...>
+#                    <...>
+### END INIT INFO
+
+# Author: minoru <minoru@unknown>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC=minipro             # Introduce a short description here
+NAME=minipro             # Introduce the short server's name here
+DAEMON=/usr/sbin/minipro # Introduce the server's location here
+DAEMON_ARGS=""             # Arguments to run the daemon with
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# The above code will not work for interpreted scripts, use the next
+	# six lines below instead (Ref: #643337, start-stop-daemon(8) )
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME --test > /dev/null \
+	#	|| return 1
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME -- $DAEMON_ARGS \
+	#	|| return 2
+
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/manpage.1.ex

@@ -0,0 +1,56 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" (C) Copyright 2014 minoru <minoru@unknown>,
+.\"
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH MINIPRO SECTION "February 25, 2014"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+minipro \- program to do something
+.SH SYNOPSIS
+.B minipro
+.RI [ options ] " files" ...
+.br
+.B bar
+.RI [ options ] " files" ...
+.SH DESCRIPTION
+This manual page documents briefly the
+.B minipro
+and
+.B bar
+commands.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
+.\" respectively.
+\fBminipro\fP is a program that...
+.SH OPTIONS
+These programs follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of options is included below.
+For a complete description, see the Info files.
+.TP
+.B \-h, \-\-help
+Show summary of options.
+.TP
+.B \-v, \-\-version
+Show version of program.
+.SH SEE ALSO
+.BR bar (1),
+.BR baz (1).
+.br
+The programs are documented fully by
+.IR "The Rise and Fall of a Fooish Bar" ,
+available via the Info system.