Pytradfri

This is a Python class to communicate with the IKEA Trådfri (Tradfri) ZigBee-based Gateway. The gateway can control IKEA lights and also Philips Hue bulbs. Some of the features include:

• Get information on the gateway
• List all devices connected to gateway
• List all lights and get attributes of lights (name, state, color temp, dimmer level etc)
• Change attribute values of lights (name, state, color temp, dimmer level etc)

Table of contents:

1. Installation
2. Stand-alone use (command-line interface)
3. Implement in your own Python platform
4. Docker support
5. Acknowledgements

1. Installation

In order to use the code, you first need to install libcoap as per the following instructions (you might have to use sudo for some commands to work):

$ apt-get install libtool

$ git clone --depth 1 --recursive -b dtls https://github.com/home-assistant/libcoap.git
$ cd libcoap
$ ./autogen.sh
$ ./configure --disable-documentation --disable-shared --without-debug CFLAGS="-D COAP_DEBUG_FD=stderr"
$ make
$ make install

2. Stand-alone use (command-line interface)

If you want to test this library stand-alone in a command-line interface:

$ python3 -i -m pytradfri IP KEY

Where the following variables are substituted:

• IP is the IP-address to your gateway.
• KEY is written on the back of your IKEA Tradfri Gateway.

Examples of commands in the stand-alone prompt:

List all lights:

lights

Set brightnes of item 1 to 50 in lights list:

lights[1].set_light_brightness(50)

3. Implement in your own Python platform

#!/usr/bin/env python3

# put all of this in test_pytradfri.py
# Run by executing the following command from shell, from the same folder you have stored test_pytradfri.py in.
# python3 -m test_pytradfri IP KEY

# Pre-requisites
# pip3 install pytradfri

import sys
import pytradfri

# Assign configuration variables. The configuration check takes care they are present.
api = pytradfri.coap_cli.api_factory(sys.argv[1], sys.argv[2])
gateway = pytradfri.gateway.Gateway(api)
devices = gateway.get_devices()
lights = [dev for dev in devices if dev.has_light_control]

# Print all lights
print(lights)

# Lights can be accessed by its index, so lights[1] is the second light

# Example 1: checks state of the light 2 (true=on)
print(lights[1].light_control.lights[0].state)

# Example 2: get dimmer level of light 2
print(lights[1].light_control.lights[0].dimmer)

# Example 3: What is the name of light 2
print(lights[1].name)

# Example 4: Set the light level of light 2
lights[1].light_control.set_dimmer(20)

# Example 5: Change color of light 2
lights[1].light_control.set_hex_color('f5faf6') # f5faf6 = cold | f1e0b5 = normal | efd275 = warm

4. Docker support

There is a Docker script available to bootstrap a dev environment. Run ./script/dev_docker and you will build and launch a container that is ready to go. After launching, follow the above instructions to test the library stand-alone.

5. Acknowledgements

This is an implementation based on analysis I found here by vidarlo.

A lot of work was also put in by Paulus Schoutsen (@balloob) who took the initial code concept into this library.