Merge Full re-write of spiral vase SoftFever/OrcaSlicer#3091

src/libslic3r/GCode.cpp

@@ -1570,12 +1570,19 @@ void GCodeGenerator::process_layers(
             }
         });
     // The pipeline is variable: The vase mode filter is optional.
+    if (m_spiral_vase) {
+        float nozzle_diameter = EXTRUDER_CONFIG(nozzle_diameter);
+        float max_xy_smoothing = m_config.get_abs_value("spiral_vase_max_xy_smoothing", nozzle_diameter);
+        this->m_spiral_vase.get()->set_max_xy_smoothing(max_xy_smoothing);
+    }
     const auto spiral_vase = tbb::make_filter<LayerResult, LayerResult>(slic3r_tbb_filtermode::serial_in_order,
-        [spiral_vase = this->m_spiral_vase.get()](LayerResult in) -> LayerResult {
+        [spiral_vase = this->m_spiral_vase.get(), &layers_to_print](LayerResult in) -> LayerResult {
             if (in.nop_layer_result)
                 return in;
+
             spiral_vase->enable(in.spiral_vase_enable);
-            return { spiral_vase->process_layer(std::move(in.gcode)), in.layer_id, in.spiral_vase_enable, in.cooling_buffer_flush};
+            bool last_layer = in.layer_id == layers_to_print.size() - 1;
+            return { spiral_vase->process_layer(std::move(in.gcode), last_layer), in.layer_id, in.spiral_vase_enable, in.cooling_buffer_flush};
         });
     const auto pressure_equalizer = tbb::make_filter<LayerResult, LayerResult>(slic3r_tbb_filtermode::serial_in_order,
         [pressure_equalizer = this->m_pressure_equalizer.get()](LayerResult in) -> LayerResult {
@@ -1663,12 +1670,18 @@ void GCodeGenerator::process_layers(
             }
         });
     // The pipeline is variable: The vase mode filter is optional.
+    if (m_spiral_vase) {
+        float nozzle_diameter = EXTRUDER_CONFIG(nozzle_diameter);
+        float max_xy_smoothing = m_config.get_abs_value("spiral_vase_max_xy_smoothing", nozzle_diameter);
+        this->m_spiral_vase.get()->set_max_xy_smoothing(max_xy_smoothing);
+    }
     const auto spiral_vase = tbb::make_filter<LayerResult, LayerResult>(slic3r_tbb_filtermode::serial_in_order,
-        [spiral_vase = this->m_spiral_vase.get()](LayerResult in)->LayerResult {
+        [spiral_vase = this->m_spiral_vase.get(), &layers_to_print](LayerResult in)->LayerResult {
             if (in.nop_layer_result)
                 return in;
             spiral_vase->enable(in.spiral_vase_enable);
-            return { spiral_vase->process_layer(std::move(in.gcode)), in.layer_id, in.spiral_vase_enable, in.cooling_buffer_flush };
+            bool last_layer = in.layer_id == layers_to_print.size() - 1;
+            return { spiral_vase->process_layer(std::move(in.gcode), last_layer), in.layer_id, in.spiral_vase_enable, in.cooling_buffer_flush };
         });
     const auto pressure_equalizer = tbb::make_filter<LayerResult, LayerResult>(slic3r_tbb_filtermode::serial_in_order,
         [pressure_equalizer = this->m_pressure_equalizer.get()](LayerResult in) -> LayerResult {

src/libslic3r/GCode/SpiralVase.cpp

@@ -9,10 +9,72 @@
 #include "SpiralVase.hpp"
 #include "GCode.hpp"
 #include <sstream>
+#include <cmath>
+#include <limits>
 
 namespace Slic3r {
 
-std::string SpiralVase::process_layer(const std::string &gcode)
+namespace SpiralVaseHelpers {
+/** == Smooth Spiral Helpers == */
+/** Distance between a and b */
+float distance(SpiralVase::SpiralPoint a, SpiralVase::SpiralPoint b) {
+    return sqrt(pow(a.x - b.x, 2) + pow(a.y - b.y, 2));
+}
+
+SpiralVase::SpiralPoint subtract(SpiralVase::SpiralPoint a, SpiralVase::SpiralPoint b) {
+    return SpiralVase::SpiralPoint(a.x-b.x, a.y-b.y);
+}
+
+SpiralVase::SpiralPoint add(SpiralVase::SpiralPoint a, SpiralVase::SpiralPoint b) {
+    return SpiralVase::SpiralPoint(a.x+b.x, a.y+b.y);
+}
+
+SpiralVase::SpiralPoint scale(SpiralVase::SpiralPoint a, float factor){
+    return SpiralVase::SpiralPoint(a.x*factor, a.y*factor);
+}
+
+/** dot product */
+float dot(SpiralVase::SpiralPoint a, SpiralVase::SpiralPoint b) {
+    return a.x*b.x+a.y*b.y;
+}
+
+/** Find the point on line ab closes to point c */
+SpiralVase::SpiralPoint nearest_point_on_line(SpiralVase::SpiralPoint c, SpiralVase::SpiralPoint a, SpiralVase::SpiralPoint b, float& dist) {
+    SpiralVase::SpiralPoint ab = subtract(b, a);
+    SpiralVase::SpiralPoint ca = subtract(c, a);
+    float t = dot(ca, ab) / dot(ab, ab);
+    t = t > 1 ? 1 : t;
+    t = t < 0 ? 0 : t;
+    SpiralVase::SpiralPoint closest = SpiralVase::SpiralPoint(add(a, scale(ab, t)));
+    dist = distance(c, closest);
+    return closest;
+}
+
+/** Given a set of lines defined by points such as line[n] is the line from points[n] to points[n+1],
+ *  find the closest point to p that falls on any of the lines */
+SpiralVase::SpiralPoint nearest_point_on_lines(SpiralVase::SpiralPoint p, std::vector<SpiralVase::SpiralPoint>* points, bool& found, float& dist) {
+    if(points->size()<2) {
+        found = false;
+        return SpiralVase::SpiralPoint(0, 0);
+    }
+    float min     = std::numeric_limits<float>::max();
+    SpiralVase::SpiralPoint closest(0, 0);
+    for(unsigned long i=0; i<points->size()-1; i++) {
+        float currentDist=0;
+        SpiralVase::SpiralPoint current = nearest_point_on_line(p, points->at(i), points->at(i+1), currentDist);
+        if(currentDist<min) {
+            min = currentDist;
+            closest = current;
+            found = true;
+        }
+    }
+    dist = min;
+    return closest;
+
+}
+} // namespace SpiralVase
+
+std::string SpiralVase::process_layer(const std::string &gcode, bool last_layer)
 {
     /*  This post-processor relies on several assumptions:
         - all layers are processed through it, including those that are not supposed
@@ -21,19 +83,19 @@ std::string SpiralVase::process_layer(const std::string &gcode)
           at the beginning
         - each layer is composed by suitable geometry (i.e. a single complete loop)
         - loops were not clipped before calling this method  */
-    
+
     // If we're not going to modify G-code, just feed it to the reader
     // in order to update positions.
     if (! m_enabled) {
         m_reader.parse_buffer(gcode);
         return gcode;
     }
-    
+
     // Get total XY length for this layer by summing all extrusion moves.
     float total_layer_length = 0;
     float layer_height = 0;
     float z = 0.f;
-    
+
     {
         //FIXME Performance warning: This copies the GCodeConfig of the reader.
         GCodeReader r = m_reader;  // clone
@@ -53,19 +115,26 @@ std::string SpiralVase::process_layer(const std::string &gcode)
             }
         });
     }
-    
+
     // Remove layer height from initial Z.
     z -= layer_height;
-
+
+    std::vector<SpiralVase::SpiralPoint>* current_layer = new std::vector<SpiralVase::SpiralPoint>();
+    std::vector<SpiralVase::SpiralPoint>* previous_layer = m_previous_layer;
+
+    bool smooth_spiral = m_smooth_spiral;
     std::string new_gcode;
+    std::string transition_gcode;
+    float max_xy_dist_for_smoothing = m_max_xy_smoothing;
     //FIXME Tapering of the transition layer only works reliably with relative extruder distances.
     // For absolute extruder distances it will be switched off.
     // Tapering the absolute extruder distances requires to process every extrusion value after the first transition
     // layer.
-    bool  transition = m_transition_layer && m_config.use_relative_e_distances.value;
-    float layer_height_factor = layer_height / total_layer_length;
+    bool  transition_in = m_transition_layer && m_config.use_relative_e_distances.value;
+    bool  transition_out = last_layer && m_config.use_relative_e_distances.value;
     float len = 0.f;
-    m_reader.parse_buffer(gcode, [&new_gcode, &z, total_layer_length, layer_height_factor, transition, &len]
+    SpiralVase::SpiralPoint last_point = previous_layer != NULL && previous_layer->size() >0? previous_layer->at(previous_layer->size()-1): SpiralVase::SpiralPoint(0,0);
+    m_reader.parse_buffer(gcode, [&new_gcode, &z, total_layer_length, layer_height, transition_in, &len, &current_layer, &previous_layer, &transition_gcode, transition_out, smooth_spiral, &max_xy_dist_for_smoothing, &last_point]
         (GCodeReader &reader, GCodeReader::GCodeLine line) {
         if (line.cmd_is("G1")) {
             if (line.has_z()) {
@@ -76,30 +145,72 @@ std::string SpiralVase::process_layer(const std::string &gcode)
                 return;
             } else {
                 float dist_XY = line.dist_XY(reader);
-                if (dist_XY > 0) {
+                if (line.has_x() || line.has_y()) { // Sometimes lines have X/Y but the move is to the last position
                     // horizontal move
-                    if (line.extruding(reader)) {
+                    if (dist_XY > 0 && line.extruding(reader)) { // Exclude wipe and retract
                         len += dist_XY;
-                        line.set(reader, Z, z + len * layer_height_factor);
-                        if (transition && line.has(E))
-                            // Transition layer, modulate the amount of extrusion from zero to the final value.
-                            line.set(reader, E, line.value(E) * len / total_layer_length);
+                        float factor = len / total_layer_length;
+                        if (transition_in)
+                            // Transition layer, interpolate the amount of extrusion from zero to the final value.
+                            line.set(reader, E, line.e() * factor, 5 /*decimal_digits*/);
+                        else if (transition_out) {
+                            // We want the last layer to ramp down extrusion, but without changing z height!
+                            // So clone the line before we mess with its Z and duplicate it into a new layer that ramps down E
+                            // We add this new layer at the very end
+                            GCodeReader::GCodeLine transitionLine(line);
+                            transitionLine.set(reader, E, line.e() * (1 - factor), 5 /*decimal_digits*/);
+                            transition_gcode += transitionLine.raw() + '\n';
+                        }
+                        // This line is the core of Spiral Vase mode, ramp up the Z smoothly
+                        line.set(reader, Z, z + factor * layer_height);
+                        if (smooth_spiral) {
+                            // Now we also need to try to interpolate X and Y
+                            SpiralVase::SpiralPoint p(line.x(), line.y()); // Get current x/y coordinates
+                            current_layer->push_back(p);       // Store that point for later use on the next layer
+
+                            if (previous_layer != NULL) {
+                                bool        found    = false;
+                                float       dist     = 0;
+                                SpiralVase::SpiralPoint nearestp = SpiralVaseHelpers::nearest_point_on_lines(p, previous_layer, found, dist);
+                                if (found && dist < max_xy_dist_for_smoothing) {
+                                    // Interpolate between the point on this layer and the point on the previous layer
+                                    SpiralVase::SpiralPoint target = SpiralVaseHelpers::add(SpiralVaseHelpers::scale(nearestp, 1 - factor), SpiralVaseHelpers::scale(p, factor));
+                                    line.set(reader, X, target.x);
+                                    line.set(reader, Y, target.y);
+                                    // We need to figure out the distance of this new line!
+                                    float modified_dist_XY = SpiralVaseHelpers::distance(last_point, target);
+                                    // Scale the extrusion amount according to change in length
+                                    line.set(reader, E, line.e() * modified_dist_XY / dist_XY, 5 /*decimal_digits*/);
+                                    last_point = target;
+                                } else {
+                                    last_point = p;
+                                }
+                            }
+                        }
                         new_gcode += line.raw() + '\n';
                     }
                     return;
-                
+
                     /*  Skip travel moves: the move to first perimeter point will
                         cause a visible seam when loops are not aligned in XY; by skipping
                         it we blend the first loop move in the XY plane (although the smoothness
                         of such blend depend on how long the first segment is; maybe we should
-                        enforce some minimum length?).  */
+                        enforce some minimum length?).
+                        When smooth_spiral is enabled, we're gonna end up exactly where the next layer should
+                        start anyway, so we don't need the travel move */
                 }
             }
         }
         new_gcode += line.raw() + '\n';
+        if(transition_out) {
+            transition_gcode += line.raw() + '\n';
+        }
     });
-
-    return new_gcode;
+
+    delete m_previous_layer;
+    m_previous_layer = current_layer;
+
+    return new_gcode + transition_gcode;
 }
 
 }

src/libslic3r/GCode/SpiralVase.hpp

@@ -15,28 +15,46 @@
 namespace Slic3r {
 
 
-class SpiralVase {
+class SpiralVase
+{
 public:
+    class SpiralPoint
+    {
+    public:
+        SpiralPoint(float paramx, float paramy) : x(paramx), y(paramy) {}
+    public:
+        float x, y;
+    };
     SpiralVase(const PrintConfig &config) : m_config(config)
     {
         m_reader.z() = (float)m_config.z_offset;
         m_reader.apply_config(m_config);
+        m_previous_layer = NULL;
+        m_smooth_spiral = config.spiral_vase_smooth;
     };
 
     void 		enable(bool en) {
-   		m_transition_layer = en && ! m_enabled;
-    	m_enabled 		   = en;
+        m_transition_layer = en && ! m_enabled;
+        m_enabled 		   = en;
     }
 
-    std::string process_layer(const std::string &gcode);
+    std::string process_layer(const std::string &gcode, bool last_layer);
+
+    void set_max_xy_smoothing(float max) {
+        m_max_xy_smoothing = max;
+    }
 
 private:
     const PrintConfig  &m_config;
     GCodeReader 		m_reader;
+    float               m_max_xy_smoothing = 0.f;
 
     bool 				m_enabled = false;
     // First spiral vase layer. Layer height has to be ramped up from zero to the target layer height.
     bool 				m_transition_layer = false;
+    // Whether to interpolate XY coordinates with the previous layer. Results in no seam at layer changes
+    bool                m_smooth_spiral = false;
+    std::vector<SpiralPoint> * m_previous_layer;
 };
 
 }

src/libslic3r/Preset.cpp

@@ -438,6 +438,7 @@ void Preset::set_visible_from_appconfig(const AppConfig &app_config)
 static std::vector<std::string> s_Preset_print_options {
     "layer_height", "first_layer_height", "perimeters", "spiral_vase", "slice_closing_radius", "slicing_mode",
     "only_one_perimeter_first",
+    "spiral_vase_smooth", "spiral_vase_max_xy_smoothing",
     "top_solid_layers", "top_solid_min_thickness", "bottom_solid_layers", "bottom_solid_min_thickness",
     "ensure_vertical_shell_thickness",
     "extra_perimeters", "extra_perimeters_on_overhangs", "avoid_crossing_curled_overhangs", "avoid_crossing_perimeters", "thin_walls", "overhangs_sensitivity",

src/libslic3r/PrintConfig.cpp

@@ -2858,6 +2858,25 @@ void PrintConfigDef::init_fff_params()
                    "It won't work when printing more than one single object.");
     def->set_default_value(new ConfigOptionBool(false));
 
+    def = this->add("spiral_vase_smooth", coBool);
+    def->label = L("Smooth Spiral");
+    def->tooltip = L("Smooth Spiral smoothes out X and Y moves as well"
+                     "resulting in no visible seam at all, even in the XY directions on walls that are not vertical");
+    def->mode = comSimple;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("spiral_vase_max_xy_smoothing", coFloatOrPercent);
+    def->label = L("Max XY Smoothing");
+    def->tooltip = L("Maximum distance to move points in XY to try to achieve a smooth spiral"
+                     "If expressed as a %, it will be computed over nozzle diameter");
+    def->sidetext = L("mm or %");
+    def->ratio_over = "nozzle_diameter";
+    def->min = 0;
+    def->max = 1000;
+    def->max_literal = 10;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
+
     def = this->add("standby_temperature_delta", coInt);
     def->label = L("Temperature variation");
     // TRN PrintSettings : "Ooze prevention" > "Temperature variation"

src/libslic3r/PrintConfig.hpp

@@ -894,6 +894,8 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionFloat,              solid_infill_acceleration))
     ((ConfigOptionInt,                solid_infill_jerk))
     ((ConfigOptionBool,               spiral_vase))
+    ((ConfigOptionBool,               spiral_vase_smooth))
+    ((ConfigOptionFloatOrPercent,     spiral_vase_max_xy_smoothing))
     ((ConfigOptionInt,                standby_temperature_delta))
     ((ConfigOptionInts,               temperature))
     ((ConfigOptionInt,                threads))

src/slic3r/GUI/ConfigManipulation.cpp

@@ -261,6 +261,8 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig* config)
     toggle_field("infill_anchor", has_infill_anchors);
 
     bool has_spiral_vase         = config->opt_bool("spiral_vase");
+    toggle_field("spiral_vase_smooth", has_spiral_vase);
+    toggle_field("spiral_vase_max_xy_smoothing", has_spiral_vase && config->opt_bool("spiral_vase_smooth"));
     bool has_top_solid_infill 	 = config->opt_int("top_solid_layers") > 0;
     bool has_bottom_solid_infill = config->opt_int("bottom_solid_layers") > 0;
     bool has_solid_infill 		 = has_top_solid_infill || has_bottom_solid_infill;

src/slic3r/GUI/Tab.cpp

@@ -1445,6 +1445,8 @@ void TabPrint::build()
         optgroup = page->new_optgroup(L("Vertical shells"));
         optgroup->append_single_option_line("perimeters", category_path + "perimeters");
         optgroup->append_single_option_line("spiral_vase", category_path + "spiral-vase");
+        optgroup->append_single_option_line("spiral_vase_smooth", "spiral-vase#smooth");
+        optgroup->append_single_option_line("spiral_vase_max_xy_smoothing", "spiral-vase#max-xy-smoothing");
 
         Line line { "", "" };
         line.full_width = 1;