This application will run speedtest-cli against speedtest.net's servers using cron. It will then email the results daily and weekly.
Also - using http://www.percheron-electronics.uk/shop/ e-paper hat - you can utilize the buttons to run the speed-test maually and display the results to the screen.
To use the device you will need a few bits installted to your Raspberry Pi. You can see the full list below, but if you just want to get started, see the simple instruction below:
You will also need to enable SPI in the raspi-config tool.
If you want to go old-school and manually install all the bits and bobs, that fine, check out all the bits below.
sudo apt-get install python-pip python3-pip python-spidev python3-spidev
sudo pip install gpiozero
sudo pip-3.2 install gpiozero
sudo pip install speedtest-cli
sudo pip install ipgetter
sudo pip3 install ipgetter
sudo pip install statistics
sudo pip3 install statistics
sudo pip install ascii_graph
sudo pip3 install ascii_graph
sudo apt-get install mpack zip ssmtp mailutils mpack
Now edit the file /etc/ssmtp/ssmtp.conf as root and add the next lines. Please note that some of the lines already exist and may need to be changed. Others don't exist yet and need to be added to the end of the file.
hostname=ENTER YOUR RPI'S HOST NAME HERE
Again you'll have to replace YOU with your email login name and PASSWORD with your (application specific) gmail password. After this you're done. You don't even have to restart the SSMTP server (in fact, there is none).
You can use other smtp servers if your ISP or hosting provide has them.