Merge tag 'v6.4.12' into 6.4

This is the 6.4.12 stable release

Documentation/admin-guide/hw-vuln/srso.rst

@@ -124,8 +124,8 @@ sequence.
 To ensure the safety of this mitigation, the kernel must ensure that the
 safe return sequence is itself free from attacker interference.  In Zen3
 and Zen4, this is accomplished by creating a BTB alias between the
-untraining function srso_untrain_ret_alias() and the safe return
-function srso_safe_ret_alias() which results in evicting a potentially
+untraining function srso_alias_untrain_ret() and the safe return
+function srso_alias_safe_ret() which results in evicting a potentially
 poisoned BTB entry and using that safe one for all function returns.
 
 In older Zen1 and Zen2, this is accomplished using a reinterpretation

Documentation/admin-guide/kernel-parameters.txt

@@ -323,6 +323,7 @@
 				       option with care.
 			pgtbl_v1     - Use v1 page table for DMA-API (Default).
 			pgtbl_v2     - Use v2 page table for DMA-API.
+			irtcachedis  - Disable Interrupt Remapping Table (IRT) caching.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table

Documentation/devicetree/bindings/input/goodix,gt7375p.yaml

@@ -43,6 +43,15 @@ properties:
       itself as long as it allows the main board to make signals compatible
       with what the touchscreen is expecting for its IO rails.
 
+  goodix,no-reset-during-suspend:
+    description:
+      Set this to true to enforce the driver to not assert the reset GPIO
+      during suspend.
+      Due to potential touchscreen hardware flaw, back-powering could happen in
+      suspend if the power supply is on and with active-low reset GPIO asserted.
+      This property is used to avoid the back-powering issue.
+    type: boolean
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml

@@ -87,7 +87,7 @@ $defs:
                 emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
                 emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
                 emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
-                gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
+                gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
                 jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
                 mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
                 mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,

Documentation/networking/nf_conntrack-sysctl.rst

@@ -178,10 +178,10 @@ nf_conntrack_sctp_timeout_established - INTEGER (seconds)
 	Default is set to (hb_interval * path_max_retrans + rto_max)
 
 nf_conntrack_sctp_timeout_shutdown_sent - INTEGER (seconds)
-	default 0.3
+	default 3
 
 nf_conntrack_sctp_timeout_shutdown_recd - INTEGER (seconds)
-	default 0.3
+	default 3
 
 nf_conntrack_sctp_timeout_shutdown_ack_sent - INTEGER (seconds)
 	default 3

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 4
-SUBLEVEL = 11
+SUBLEVEL = 12
 EXTRAVERSION =
 NAME = Hurr durr I'ma ninja sloth
 

arch/arm/boot/dts/imx23.dtsi

@@ -59,7 +59,7 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0

arch/arm/boot/dts/imx28.dtsi

@@ -78,7 +78,7 @@
 				status = "disabled";
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <82 83 84 85

arch/arm/boot/dts/imx6dl-prtrvt.dts

@@ -124,6 +124,10 @@
 	status = "disabled";
 };
 
+&usbotg {
+	disable-over-current;
+};
+
 &vpu {
 	status = "disabled";
 };

arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi

@@ -182,7 +182,7 @@
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/imx6qdl-prti6q.dtsi

@@ -69,6 +69,7 @@
 	vbus-supply = <&reg_usb_h1_vbus>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -78,10 +79,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;

arch/arm/boot/dts/imx6qdl.dtsi

@@ -150,7 +150,7 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh@110000 {
+		dma_apbh: dma-controller@110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/imx6sx.dtsi

@@ -209,7 +209,7 @@
 			power-domains = <&pd_pu>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -980,6 +980,8 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -992,6 +994,8 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -1004,6 +1008,8 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6ul.dtsi

@@ -164,7 +164,7 @@
 			      <0x00a06000 0x2000>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/imx7s.dtsi

@@ -1184,6 +1184,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1198,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1212,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1257,7 +1263,7 @@
 			};
 		};
 
-		dma_apbh: dma-apbh@33000000 {
+		dma_apbh: dma-controller@33000000 {
 			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x33000000 0x2000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -1221,10 +1221,9 @@
 				compatible = "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e30000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
-						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
-							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
 				clock-frequency = <333000000>;
 				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
 					 <&clk IMX8MM_CLK_CSI1_ROOT>,

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -306,7 +306,7 @@
 
 			anatop: anatop@44480000 {
 				compatible = "fsl,imx93-anatop", "syscon";
-				reg = <0x44480000 0x10000>;
+				reg = <0x44480000 0x2000>;
 			};
 
 			adc1: adc@44530000 {

arch/arm64/boot/dts/qcom/ipq5332.dtsi

@@ -135,6 +135,13 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x721>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		rng: rng@e3000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x000e3000 0x1000>;

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -121,7 +121,7 @@
 			};
 		};
 
-		pm8150l-thermal {
+		pm8150l-pcb-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;

arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts

@@ -548,9 +548,8 @@
 &sdhci {
 	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
 	non-removable;
-	mmc-hs400-enhanced-strobe;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

@@ -45,7 +45,7 @@
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_enable_h>;
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
@@ -645,9 +645,9 @@
 };
 
 &sdhci {
+	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };

arch/arm64/include/asm/fpsimd.h

@@ -356,7 +356,7 @@ static inline int sme_max_virtualisable_vl(void)
 	return vec_max_virtualisable_vl(ARM64_VEC_SME);
 }
 
-extern void sme_alloc(struct task_struct *task);
+extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
@@ -388,7 +388,7 @@ static inline void sme_smstart_sm(void) { }
 static inline void sme_smstop_sm(void) { }
 static inline void sme_smstop(void) { }
 
-static inline void sme_alloc(struct task_struct *task) { }
+static inline void sme_alloc(struct task_struct *task, bool flush) { }
 static inline void sme_setup(void) { }
 static inline unsigned int sme_get_vl(void) { return 0; }
 static inline int sme_max_vl(void) { return 0; }

arch/arm64/kernel/fpsimd.c

@@ -1285,9 +1285,9 @@ void fpsimd_release_task(struct task_struct *dead_task)
  * the interest of testability and predictability, the architecture
  * guarantees that when ZA is enabled it will be zeroed.
  */
-void sme_alloc(struct task_struct *task)
+void sme_alloc(struct task_struct *task, bool flush)
 {
-	if (task->thread.sme_state) {
+	if (task->thread.sme_state && flush) {
 		memset(task->thread.sme_state, 0, sme_state_size(task));
 		return;
 	}
@@ -1515,7 +1515,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 	}
 
 	sve_alloc(current, false);
-	sme_alloc(current);
+	sme_alloc(current, true);
 	if (!current->thread.sve_state || !current->thread.sme_state) {
 		force_sig(SIGKILL);
 		return;

arch/arm64/kernel/ptrace.c

@@ -881,6 +881,13 @@ static int sve_set_common(struct task_struct *target,
 			break;
 		case ARM64_VEC_SME:
 			target->thread.svcr |= SVCR_SM_MASK;
+
+			/*
+			 * Disable traps and ensure there is SME storage but
+			 * preserve any currently set values in ZA/ZT.
+			 */
+			sme_alloc(target, false);
+			set_tsk_thread_flag(target, TIF_SME);
 			break;
 		default:
 			WARN_ON_ONCE(1);
@@ -1100,7 +1107,7 @@ static int za_set(struct task_struct *target,
 	}
 
 	/* Allocate/reinit ZA storage */
-	sme_alloc(target);
+	sme_alloc(target, true);
 	if (!target->thread.sme_state) {
 		ret = -ENOMEM;
 		goto out;
@@ -1170,17 +1177,24 @@ static int zt_set(struct task_struct *target,
 	if (!system_supports_sme2())
 		return -EINVAL;
 
+	/* Ensure SVE storage in case this is first use of SME */
+	sve_alloc(target, false);
+	if (!target->thread.sve_state)
+		return -ENOMEM;
+
 	if (!thread_za_enabled(&target->thread)) {
-		sme_alloc(target);
+		sme_alloc(target, true);
 		if (!target->thread.sme_state)
 			return -ENOMEM;
 	}
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 thread_zt_state(&target->thread),
 				 0, ZT_SIG_REG_BYTES);
-	if (ret == 0)
+	if (ret == 0) {
 		target->thread.svcr |= SVCR_ZA_MASK;
+		set_tsk_thread_flag(target, TIF_SME);
+	}
 
 	fpsimd_flush_task_state(target);
 

arch/arm64/kernel/signal.c

@@ -474,7 +474,7 @@ static int restore_za_context(struct user_ctxs *user)
 	fpsimd_flush_task_state(current);
 	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
 
-	sme_alloc(current);
+	sme_alloc(current, true);
 	if (!current->thread.sme_state) {
 		current->thread.svcr &= ~SVCR_ZA_MASK;
 		clear_thread_flag(TIF_SME);