Add files via upload

gmp-6.2.1/tune/Makefile.am

@@ -0,0 +1,186 @@
+## Process this file with automake to generate Makefile.in
+
+# Copyright 2000-2003, 2005-2011 Free Software Foundation, Inc.
+#
+#  This file is part of the GNU MP Library.
+#
+#  The GNU MP Library is free software; you can redistribute it and/or modify
+#  it under the terms of either:
+#
+#    * the GNU Lesser General Public License as published by the Free
+#      Software Foundation; either version 3 of the License, or (at your
+#      option) any later version.
+#
+#  or
+#
+#    * the GNU General Public License as published by the Free Software
+#      Foundation; either version 2 of the License, or (at your option) any
+#      later version.
+#
+#  or both in parallel, as here.
+#
+#  The GNU MP Library is distributed in the hope that it will be useful, but
+#  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+#  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+#  for more details.
+#
+#  You should have received copies of the GNU General Public License and the
+#  GNU Lesser General Public License along with the GNU MP Library.  If not,
+#  see https://www.gnu.org/licenses/.
+
+
+AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/tests
+AM_LDFLAGS = -no-install
+
+EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \
+  ia64.asm powerpc.asm powerpc64.asm x86_64.asm many.pl
+noinst_HEADERS = speed.h
+
+# Prefer -static on the speed and tune programs, since that can avoid
+# overheads of shared library linkages on some systems.  Libtool tends to
+# botch -static if configured with --disable-static, perhaps reasonably
+# enough.  In any event under --disable-static the only choice is a dynamic
+# link so there's no point in -static.
+#
+if ENABLE_STATIC
+STATIC = -static
+else
+STATIC =
+endif
+
+
+EXTRA_LTLIBRARIES = libspeed.la
+
+libspeed_la_SOURCES =							\
+  common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c		\
+  div_qr_1n_pi1_1.c div_qr_1n_pi1_2.c div_qr_1_tune.c			\
+  freq.c								\
+  gcdext_single.c gcdext_double.c gcdextod.c gcdextos.c			\
+  hgcd_lehmer.c hgcd_appr_lehmer.c hgcd_reduce_1.c hgcd_reduce_2.c	\
+  jacbase1.c jacbase2.c jacbase3.c jacbase4.c				\
+  hgcd2-1.c hgcd2-2.c hgcd2-3.c hgcd2-4.c hgcd2-5.c			\
+  mod_1_div.c mod_1_inv.c mod_1_1-1.c mod_1_1-2.c modlinv.c		\
+  noop.c powm_mod.c powm_redc.c pre_divrem_1.c				\
+  set_strb.c set_strs.c set_strp.c time.c
+
+libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \
+  $(top_builddir)/tests/libtests.la $(top_builddir)/libgmp.la
+libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM)
+libspeed_la_LDFLAGS = $(STATIC)
+
+$(top_builddir)/tests/libtests.la:
+	cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la
+
+
+# The library code is faster static than shared on some systems, so do
+# tuning and measuring with static, since users who care about maximizing
+# speed will be using that.  speed-dynamic exists to show the difference.
+#
+# On Solaris 8, gcc 2.95.2 -static is somehow broken (it creates executables
+# that immediately seg fault), so -all-static is not used.  The only thing
+# -all-static does is make libc static linked as well as libgmp, and that
+# makes a difference only when measuring malloc and friends in the speed
+# program.  This can always be forced with "make speed_LDFLAGS=-all-static
+# ..." if desired, see tune/README.
+
+EXTRA_PROGRAMS = speed speed-dynamic speed-ext tuneup tune-gcd-p
+
+DEPENDENCIES = libspeed.la
+LDADD = $(DEPENDENCIES) $(TUNE_LIBS)
+
+speed_SOURCES = speed.c
+speed_LDFLAGS = $(STATIC)
+
+speed_dynamic_SOURCES = speed.c
+
+speed_ext_SOURCES = speed-ext.c
+speed_ext_LDFLAGS = $(STATIC)
+
+tuneup_SOURCES = tuneup.c hgcd2.c
+nodist_tuneup_SOURCES = sqr_basecase.c fac_ui.c $(TUNE_MPN_SRCS)
+tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la
+tuneup_LDADD = $(tuneup_DEPENDENCIES) $(TUNE_LIBS)
+tuneup_LDFLAGS = $(STATIC)
+
+tune_gcd_p_SOURCES = tune-gcd-p.c
+tune_gcd_p_DEPENDENCIES = ../mpn/gcd.c
+tune_gcd_p_LDFLAGS = $(STATIC)
+
+
+tune:
+	$(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT)
+	./tuneup
+
+allprogs: $(EXTRA_PROGRAMS)
+
+# $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl
+CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \
+	$(TUNE_MPN_SRCS) fac_ui.c sqr_asm.asm \
+	stg.gnuplot stg.data \
+	mtg.gnuplot mtg.data \
+	fibg.gnuplot fibg.data \
+	graph.gnuplot graph.data \
+	$(MANY_CLEAN)
+DISTCLEANFILES = sqr_basecase.c  $(MANY_DISTCLEAN)
+
+
+# Generating these little files at build time seems better than including
+# them in the distribution, since the list can be changed more easily.
+#
+# mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1
+# and 2 limb divisors, which are never used during tuning, so it doesn't
+# matter whether it picks up a tuned or untuned version of those.
+#
+# divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking
+# problem.  If a native divrem_1 provides an mpn_divrem_1c entrypoint then
+# common.c will want that, but the generic divrem_1 doesn't provide it,
+# likewise for mod_1.  The simplest way around this is to have the tune
+# build versions renamed suitably.
+#
+# FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the
+# recompiled object will be rebuilt if that file changes.
+
+TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) divrem_1.c mod_1.c
+TUNE_MPN_SRCS_BASIC = div_qr_2.c bdiv_q.c bdiv_qr.c			\
+  dcpi1_div_qr.c dcpi1_divappr_q.c dcpi1_bdiv_qr.c dcpi1_bdiv_q.c	\
+  invertappr.c invert.c binvert.c divrem_2.c gcd.c gcdext.c		\
+  get_str.c set_str.c matrix22_mul.c					\
+  hgcd.c hgcd_appr.c hgcd_reduce.c					\
+  mul_n.c sqr.c sec_powm.c						\
+  mullo_n.c mul_fft.c mul.c tdiv_qr.c mulmod_bnm1.c sqrmod_bnm1.c	\
+  mulmid.c mulmid_n.c toom42_mulmid.c sqrlo.c sqrlo_basecase.c		\
+  nussbaumer_mul.c toom6h_mul.c toom8h_mul.c toom6_sqr.c toom8_sqr.c	\
+  toom22_mul.c toom2_sqr.c toom33_mul.c toom3_sqr.c toom44_mul.c toom4_sqr.c
+
+$(TUNE_MPN_SRCS_BASIC):
+	for i in $(TUNE_MPN_SRCS_BASIC); do \
+	  echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
+	  echo "#include \"mpn/generic/$$i\"" >>$$i; \
+	done
+
+divrem_1.c:
+	echo "#define TUNE_PROGRAM_BUILD 1"                >divrem_1.c
+	echo "#define __gmpn_divrem_1  mpn_divrem_1_tune" >>divrem_1.c
+	echo "#include \"mpn/generic/divrem_1.c\""        >>divrem_1.c
+
+mod_1.c:
+	echo "#define TUNE_PROGRAM_BUILD 1"          >mod_1.c
+	echo "#define __gmpn_mod_1  mpn_mod_1_tune" >>mod_1.c
+	echo "#include \"mpn/generic/mod_1.c\""     >>mod_1.c
+
+sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm
+	echo 'define(SQR_TOOM2_THRESHOLD_OVERRIDE,SQR_TOOM2_THRESHOLD_MAX)' >sqr_asm.asm
+	echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm
+
+# FIXME: Should it depend on $(top_builddir)/fac_ui.h too?
+fac_ui.c: $(top_builddir)/mpz/fac_ui.c
+	echo "#define TUNE_PROGRAM_BUILD 1"          >fac_ui.c
+	echo "#define __gmpz_fac_ui mpz_fac_ui_tune" >>fac_ui.c
+	echo "#define __gmpz_oddfac_1 mpz_oddfac_1_tune" >>fac_ui.c
+	echo "#include \"mpz/oddfac_1.c\""           >>fac_ui.c
+	echo "#include \"mpz/fac_ui.c\""             >>fac_ui.c
+
+include ../mpn/Makeasm.am
+
+.NOTPARALLEL:
+