Skip to content

Usage Instructions

Jump to bottom
Wei Liang Yap edited this page Aug 27, 2023 · 5 revisions

Date: 22 April 2023

To set up the X32 for general speech:

  1. Turn on the sound system (see printed guide if needed).

  2. Turn on this box by flicking the mode switch down to NORMAL MODE.

If it is not working, the battery is probably depleted. Connect a suitable USB cable to supply power.

OPTIONAL: If you wish to charge the battery, the mode switch must be at NORMAL MODE.

  1. Wait for the green indicator to change from flashing to solid green (this means the WiFi is connected).

  2. Press and hold down the yellow button for at least 3 seconds; release the button after the second flash.

  3. The task is now complete, therefore please turn off this box to conserve the battery for the next user. It is no-longer needed for the session.

The following will be enabled:

  1. Lectern microphone
  2. Tie-clip microphone
  3. Both handheld microphones
  4. HDMI sound (for laptop)

The band microphones/instruments will be disabled.

When the meeting is finished, please remember to turn off the sound system (see printed guide if needed). Thank you.

Quick reference:

Button Action Purpose
blue (*) short press band are singing
green (*) short press worship leader speaking
green (*) long press worship leader mumbling
white short press lectern user mumbling
yellow short press lectern microphone
yellow v. long press initialise settings
left mute - mute all band group
right mute - mute all speech group

(*) blue and green buttons are duplicated in the external footswitch

NB: speech group does not include singing microphones used by the band

Clone this wiki locally