pimatic-plugin-mySensors

Note: beta version

Pimatic plugin supporting MySensors as controller. (http://mysensors.org/)

Controllers

Support for following sensors

• Temperature and Humidity ( http://mysensors.org/build/humidity)
• Temperature and Pressure ( http://mysensors.org/build/pressure)
• Motion ( http://mysensors.org/build/motion )
• Relay-Actuator ( http://www.mysensors.org/build/relay )
• TimeAware Sensor support ( Unix time seconds )
• Binary buttom ( http://www.mysensors.org/build/binary )
• Dimmer
• Distance
• Light Sensor
• Gas Sensor ( ppm )
• PulseMeter ( experimental only support wattage/Ampere )
• Battery level of multiple sensors
• support for sending IR codes to mysensor node ( using Action Provider/Handler )
• more to be add.. :)

Gateways

Gateway can be anything from for arduino serial gateway or Raspberry pi

• NRF24L01+ connected to raspberry pi SPI. (using https://github.com/mysensors/Raspberry ) ( SPI core clock changes and never works. if pi is overclock , so avoid it )

• Serial Gateway (http://mysensors.org/build/serial_gateway)

Pimatic Configuration changes

Configuration

You can load the plugin by editing your config.json to include:

{
      "plugin": "mysensors",
      "driver": "serialport",
      "protocols": "1.4.1",
      "startingNodeId": 1,
      "driverOptions": {
      "//": "'/dev/ttyUSBx' if using serial Gateway",
      "serialDevice": "/dev/ttyMySensorsGateway", 
      "baudrate": 115200
      }
}

in the plugins section.

Rules

• For sending IR hex code to mysensors node use either "send Ir" or simply "Ir" command in action text box. exp. Ir nodeid: "id" sensorid: "id" cmdcode: "0x342333" Note: uses V_IR_SEND type code to send IR command.

Devices

Note: To enable battery level with sensor. set ["batterystat"] to true. see temp & Hum exp. support is enable for all sensor except PIR,Switch. for PIR or switch use configure seperate battery devices.

• Temperature and Humidity

Devices must be added manually to the device section of your pimatic config.

This is the basic sensor with only temperature and humidity

 {
      "id": "DHT11",
      "name": "DHT11",
      "class": "MySensorsDHT",
      "nodeid": 10,
      "batterySensor": true,
      "sensorid": [
        0,
        1
      ]
    }

• Temperature

This is the basic sensor with only temperature

    {
      "id": "Temp1",
      "name": "Temp1",
      "class": "MySensorsDST",
      "nodeid": 11,
      "batterySensor": true,
      "sensorid": 0
    }

• Temperature and Pressure

 {
      "id": "BMP",
      "name": "BMP",
      "class": "MySensorsBMP",
      "nodeid": 10,
      "batterySensor": true,
      "sensorid": [
        0,
        1,
        2
      ]
    }

• Motion sensor PIR

    {
      "id": "PIR",
      "name": "PIR",
      "class": "MySensorsPIR",
      "nodeid": 10,
      "sensorid": 2,
      "resetTime": 8000
    },

• Relay-Actuator

 {
      "id": "Switch",
      "name": "Switch",
      "class": "MySensorsSwitch",
      "nodeid": 10,
      "sensorid": 1
    },

• Dimmer

 {
      "id": "Dimmer",
      "name": "Dimmer",
      "class": "MySensorsDimmer",
      "nodeid": 10,
      "sensorid": 1
    },

• Binary Button

  {
      "id": "Door",
      "name": "Door",
      "class": "MySensorsButton",
      "nodeid": 12,
      "batterySensor": true,
      "sensorid": 1
  },

  

• Battery levels

  {
      "id": "Battery",
      "name": "Batterylevel",
      "class": "MySensorsBattery",
      "nodeid": [
      11,
      12,
      13
      ]
  },
  

• Light sensor ( 0 to 100 )

  {
      "id": "Light",
      "name": "Light",
      "class": "MySensorsLight",
      "nodeid": 15,
      "batterySensor": true,
      "sensorid": 2
  }

• Gas sensor ( ppm )

  {
      "id": "GasSensor,
      "name": "GasSensor",
      "class": "MySensorsGas",
      "nodeid": 14,
      "batterySensor": true,
      "sensorid": 3
  }
  

• Pulse sensor ( Watt, KWh and Ampere )

  {
      "id": "EnergySensor,
      "name": "Energy Sensor",
      "class": "MySensorsPulseMeter",
      "nodeid": 3,
      "batterySensor": true,
      "sensorid": 1,
      "appliedVoltage"  : 220
  }