Skip to content

A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller

License

Notifications You must be signed in to change notification settings

ElectronicCats/Cat-Sink

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

24 Commits
 
 
 
 
 
 
 
 

Repository files navigation

CatSink - USB power supply with PD

A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller

USB-C PD offers the option to negotiate power delivery from a compatible power supply. This board plays the role of a sink device, enabling any device to be powered by a USB power supply. Any type of power connector can be attached through a 2-pin screw terminal or directly soldered into the PCB for a lower profile. The voltage can be set to 5V, 9V, 12V, or 20V and the maximum negotiable current can be set to 1A, 2A, 3A, or 5A. Other voltage or current settings are possible by changing resistors. No programming is needed.

How to contribute

Contributions are welcome!

Please read the document Contribution Manual which will show you how to contribute your changes to the project.

✨ Thanks to all our contributors! ✨

See Electronic Cats CLA for more information.

See the community code of conduct for a vision of the community we want to build and what we expect from it."

License

Licencia Creative Commons
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Electronic Cats invests time and resources in providing this open-source design, please support Electronic Cats and open-source hardware by purchasing products from Electronic Cats!

Designed by Electronic Cats.

Firmware released under an GNU AGPL v3.0 license. See the LICENSE file for more information.

Hardware released under an CERN Open Hardware Licence v1.2. See the LICENSE_HARDWARE file for more information.

Electronic Cats is a registered trademark, please do not use it if you sell these PCBs.

Octuber 2020