DISCONTINUATION OF PROJECT.

This project will no longer be maintained by Intel.

Intel has ceased development and contributions including, but not limited to, maintenance, bug fixes, new releases, or updates, to this project.

Intel no longer accepts patches to this project.

If you have an ongoing need to use this project, are interested in independently developing it, or would like to maintain patches for the open source software community, please create your own fork of this project.

Curie Open Development Kit - Z

For Intel Community Support, product questions, or help troubleshooting, visit ICS: https://communities.intel.com/community/tech/intel-curie

|

Contents

• x86: Zephyr application
• ARC: Zephyr application

Supported Platforms

• Ubuntu 14.04 - 64 bit

Installation

mkdir -p ~/CODK && cd $_
git clone https://github.com/01org/CODK-Z.git
cd CODK-Z
make clone
sudo make install-dep
make setup
source ../zephyr/zephyr-env.sh

Compile

• x86: make compile-x86
• ARC: make compile-arc
• Both: make compile

Upload

Using USB/DFU

• x86: make upload-x86-dfu
• ARC: make upload-arc-dfu
• Both: make upload

Using JTAG

• x86: make upload-x86-jtag
• ARC: make upload-arc-jtag
• Both: make upload-jtag

Default app blinks the pin-13 LED on Arduino 101 board

BLE Firmware

Curie ODK requires an updated BLE firmware. If you're on a factory version, please update.
The script will prompt you to manually reset the board.

• BLE: make upload-ble-dfu

Debug

Connect JTAG and open three terminal tabs

Tab 1: Debug Server

make debug-server

Tab 2: x86

make debug-x86
(gdb) target remote localhost:3334

Tab 3: ARC

make debug-arc
(gdb) target remote localhost:3333