Gigabyte Aorus Pro B660M Hackintosh

System Overview

Type	Item
Motherboard	B660M Gigabyte Aorus Pro DDR4
CPU	Intel Core i7-12700F @ 2.10 GHz, 25M Cache, up to 4.90 GHz
RAM	4 x Corsair Vengeance LPX 8GB 3200MHz DDR4 CMK16GX4M2E3200C
GPU	Sapphire Nitro+ RX 6600 XT 8GB
SSD1	Western Digital SN850 500GB NVMe Gen4x4 Solid State Drive
SSD2	Lexar 256GB SATA Solid State Drive
SSD3	KingSpec 480GB SATA Solid State Drive
Sound	Realtek ALC897
Wireless, Bluetooth	Apple BCM94360CD Wireless Card
LAN	Intel Ethernet I-225V
BIOS Version	F25

Current Status

Feature	Status
CPU Power Management	✅ Working
Sleep/Wake	✅ Working
AMD RX 6600 XT Graphics Acceleration	✅ Working
Wi-Fi/Bluetooth	✅ Working
Ethernet	✅ Working
Audio	✅ Working
Speakers and Headphones	✅ Working
iMessage/Facetime and App Store	✅ Working
Airdrop/Handoff	✅ Working
FileVault 2	✅ Working
DRM	✅ Working
BootCamp	✅ Working

BIOS Configuration

Recommend you should Load Optimized Default first. Then save and restart and go to BIOS again.

Tweaker:

• Extreme Memory Profile: Profile 1

• Advanced CPU Settings:

  • Hyper-Threading Technology: Enabled
  • Intel Turbo Boost Technology: Auto (not the 3.0 one)
  • Turbo Power Limit: Enabled
    • Package Power Limit1 - TDP (Watts): 160
    • Package Power Limit2 (Watts): 160

• Advanced Memory Setting:

  • Memory Enhancement Setting: Enhanced Performance

• Advanced Voltage Settings > CPU/VRM Settings:

  • CPU Vcore Loadline Calibration: Low

Settings:

• Platform Power:

  • ErP: Disable
  • Power Loading: Enabled

• IO Ports:

  • Initial Display Output: PCIe 1 Slot

  • Above 4G Decoding: Enabled

  • Above 4G MMIO BIOS assignment: Disabled (Will cause the issue with 2nd sleep)

  • Super IO Configuration → Serial Port: Disabled (Will cause the issue with Apple Watch unlock)

  • USB Configuration:

    • XHCI Hand-off → Enabled
    • Legacy USB Support → Enabled
    • USB Mass Storage Driver Support → Enabled
    • Port 60/64 Emulation → Disabled

  • Network Stack Configuration → Network Stack: Disabled

• Miscellaneous:

  • Intel Platform Trust Technology(PTT) → Disabled
  • Vt-d → Enabled

Boot:

• CFG Lock: Disabled
• Fast Boot: Disable Link
• Windows 10 Features: Windows 10
• CSM Support: Disabled
• Secure Boot: Disabled (Secure Boot will be disabled by default, but good to check)

USB Mapping

• USB Map is done by SSDT-USBP.aml. Can be used for AX motherboard with Intel wireless card.

CPU Power Management

• CPU power management is handled with CPUFriend and CPUFriendDataProvider for SMBIOS MacPro7,1. If you have CPU Geekbench score is lower than me, please check your BIOS configuration. If BIOS is correct, the single score and multi score almost should be liked the result picture.

iService

• To use iMessage and other Apple services, you need to generate your own serial numbers. This can be done using CorpNewt's GenSMBIOS. Make sure model is MacPro7,1. Then, go Apple Check Coverage page to check your generated serial numbers. If the website tells you that the serial number is not valid, that is fine. Otherwise, you have to generate a new set.

• Next you will have to copy the following values to your config.plist:

  • Serial Number -> PlatformInfo/Generic/SystemSerialNumber.
  • Board Number -> PlatformInfo/Generic/MLB.
  • SmUUID -> /PlatformInfo/Generic/SystemUUID. Reboot and Apple services should work.

• If they don't, follow this in-depth guide. It goes deeper into ROM, clearing NVRAM, clearing Keychain (missing this step might cause major issues), and much more.

macOS Sonoma

Note: This guide is for Apple wifi card only. For Intel wifi card, please check OpenIntelWireless repo for more information.

• Preparation:

  • OpenCore is the latest version.

  • Download these kexts here: https://cdn.discordapp.com/attachments/832423433488171038/1158424870380654682/IO80211_Legacy_Sonoma.zip

  • Extract .zip file and put 2 kexts to OC/Kexts folder.

  • Open config.plist and snapshot one time.

    • System Integrity Protection is set to 0x803
      • csr-active-config | Data | 03080000
      • Reset NVRAM or add csr-active-config to Delete to ensure new variable is set.
    • AMFI is disabled
      • boot-arg | string | amfi=0x80
    • SecureBootModel is set to Disabled.
    • Kernel > Block:
      • Identifier: com.apple.iokit.IOSkywalkFamily
      • Comment: Allow IOSkywalkFamily Downgrade
      • Enabled: True
      • Strategy: Exclude
      • MinKernel: 23.0.0 (Important, apply on Sonoma only)
    • Make sure IOSkywalk.kext and IO80211FamilyLegacy.kext and its child AirPortBrcmNIC.kext are injected. Also, set all MinKernel to 23.0.0 (apply on Sonoma only).

  • Restart the machine.

• Installation:

  • Download the latest version of OpenCore Legacy Patcher.
  • Copy OCLP to Application folder and run it.
  • If everything is correct, you can click the Post-Install Root Patch button to start patching.

• Finish
  • Then restart the machine. The wifi should be worked. If not, try to reset NVRAM and reset network settings. You can follow here for the network reset guide.

CPU Topology Rebuild

• -ctrsmt boot arg makes E-Cores to be recognized as the 3-way SMT logical threads of the P-Cores. That means with my i7-12700F, I will have 8 cores and 20 threads on macOS. This boot-arg can fix Xcode app building.
• More informations can be found at here. Thanks to b00t0x for his amazing work.

Credit

• Apple for macOS.
• Acidanthera Team for OpenCore Bootloader and many Kernel Extensions.

Support

• Support me:
  • Paypal