GCSViews: If the delay of WAYPOINT is set to less than 0, set it to 0 #2654
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I set it to 0 if the WAYPOINT delay is set to a value less than 0.
I set the PR to return an error response if the WAYPOINT delay is set to a value less than 0 on the ArduPilot side.
I hoped that the ArduPilot members would check the input value on the GCS side.
I was unable to set a value less than 0 for the WAYPOINT delay in APM PLANNER2.
I decided to change the MP side.
ArduPilot/ardupilot#17704