Hardware guide

[juanitoddd]

Hello friends !
First of all, thank you for keep working on this project 🙏

I would like to kindly ask you for guidance on which hardware to buy, to start this project.

I am aware this is based on the ESP32 but what about specific versions/models and also which audio module would be appropriate to make it work.
I have followed posts about the MAX98357 and ma12070p but not sure which to buy. anyone able to share any experience with them ?

Thank you in advance

[velaar]

Mine is running on LyRaT v4.3 boards. 3 boards deployed so far.On Mar 15, 2023, at 9:57 AM, Juan David ***@***.***> wrote: Hello friends ! First of all, thank you for keep working on this project 🙏 I would like to kindly ask you for guidance on which hardware to buy, to start this project. I am aware this is based on the ESP32 but what about specific versions/models and also which audio module would be appropriate to make it work. I have followed posts about the MAX98357 and ma12070p but not sure which to buy. anyone able to share any experience with them ? Thank you in advance —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[CarlosDerSeher]

If you have a look at https://github.com/CarlosDerSeher/snapclient/tree/master/components/custom_board you'll find the supported audio codecs there. Also all espressif built devBoards should work.

You can use any esp32 wroom/wrover module based board, but be aware when using wroom based boards you don't have PSRAM available and you will be limited in buffer size (< 750ms) on snapserver.