Build Instructions using docker and Windows 10

Work-in-progress page

Building EdgeTX on Windows 10 using Docker images

Download and install Docker Desktop for Windows

Download and install GWSL to run Linux Companion and Simulator

Run GWSL to configure it. Accept page 1 and 2 defaults and add disable access control on page 3

Fetch a local copy of the EdgeTX repository or update your existing local EdgeTX repository

git clone --recursive -b main https://github.com/EdgeTX/edgetx.git EdgeTX

If you already have a local EdgeTX repository don't forget to update the submodules too, e.g.:

git fetch origin
git checkout main
git submodule update --init --recursive

Run build (example TX16s)

open a PowerShell
cd to your local repository

docker run --name="ETXDocker" -it --rm --mount src="$(pwd)",target="/src",type=bind ghcr.io/edgetx/edgetx-dev bash
cd src
mkdir -p build-output
cd build-output
cmake -DPCB=X10 -DPCBREV=TX16S -DCMAKE_BUILD_TYPE=Release ../
make configure
make -C arm-none-eabi -j$(nproc) firmware
make -C native -j$(nproc) companion28
make -C native -j$(nproc) simulator28
make -C native -j$(nproc) libsimulator

find the results in folder build-output of your local build repository folder

More Cmake build options

X9d+:

-DPCB=X9D+ -DCMAKE_BUILD_TYPE=Release

X7:

-DPCB=X7 -DCMAKE_BUILD_TYPE=Release

TX12:

-DPCB=X7 -DPCBREV=TX12 -DCMAKE_BUILD_TYPE=Release

TX16S:

-DPCB=X10 -DPCBREV=TX16S -DCMAKE_BUILD_TYPE=Release

Running Linux Companion and Simulator

Running Companion

make sure GWSL is running
open a PowerShell
in case you don't know your IP address enter 'ipconfig' to find out
cd to your build folder
remember to replace IP_OF_YOUR_WINDOWS_MACHINE with your IP address and enter:

docker run --name="ETXDocker" -it --rm --mount src="$(pwd)",target="/src",type=bind ghcr.io/edgetx/edgetx-dev bash
export DISPLAY=IP_OF_YOUR_WINDOWS_MACHINE:0.0
cd src
./native/companion28

Running Simulator

make sure GWSL is running
open a PowerShell
in case you don't know your IP address enter ipconfig to find out
cd to your build folder
remember to replace IP_OF_YOUR_WINDOWS_MACHINE with your IP address and enter:

docker run --name="ETXDocker" -it --rm --mount src="$(pwd)",target="/src",type=bind ghcr.io/edgetx/edgetx-dev bash
export DISPLAY=IP_OF_YOUR_WINDOWS_MACHINE:0.0
cd src
./native/simulator28

Needful things

Should you get a message like container name "/ETXDocker" is already in use open a PowerShell and enter docker stop ETXDocker
If you need to update the docker image open a PowerShell and enter: docker rmi ghcr.io/edgetx/edgetx-dev. The latest image will then be downloaded at next docker run
before running the simulator you need to run companion and create a radio profile
companion and simulator won't have audio. If you need audio you might find PulseAudio on WSL2 useful