SVD (Simple Vesc Display)

Simple Vesc Display based on esp32

Arduino compatible FW low HW cost (any esp + any display that is supported by the tft library) It was designed on a 2.2" 320x240 ili9341 TESTED on vesc 6.02

It uses : tft_eSPI from https://github.com/Bodmer/TFT_eSPI FlickerFreePrint from https://github.com/KrisKasprzak/FlickerFreePrint VescUart from https://github.com/SolidGeek/VescUart and the old but good EEPROMAnything

Installation :

1. copy tft_eSPI into Arduino\libraries\folder (eg. C:\Users\User\Documents\Arduino\libraries\TFT_eSPI)
2. copy VESCUART into Arduino\libraries\folder (eg C:\Users\User\Documents\Arduino\libraries\VescUart)
3. copy PNGDEC into Arduino\libraries\folder (eg.C:\Users\User\Documents\Arduino\libraries\PNGdec)
4. copy FlickerFreePrint into Arduino\libraries\folder (eg: C:\Users\User\Documents\Arduino\libraries\FlickerFreePrint)

ps. im no programmer by any units of measurements. all the code was inspired from roxie and davega