Rad Pro is a custom firmware that enhances the capabilities of several commercially available Geiger counters, including the FS2011, YT-203B, Bosean FS-600, Bosean FS-1000 and FNIRSI GC-01.
With Rad Pro, you can:
- Measure instantaneous radiation rate.
- Measure average radiation rate for performing surveys.
- Measure cumulative dose.
- Set up user-adjustable rate and dose alarms.
- Plot radiation rate history (10 minutes, 1 hour and 24 hours).
- Log data to the built-in flash memory or live on a computer, optionally sending the data to the gmcmap.com, radmon.org and safecast.org radiation monitoring websites.
- Generate true random data: secure passwords (alphanumeric, full ASCII), random hexadecimal and decimal numbers, dice throws (4-sided, 6-sided, 8-sided, 12-sided and 20-sided) and coin flips.
- Read before installing: legal stuff
- Installing on the FS2011/YT-203B
- Installing on the Bosean FS-600/Bosean FS-1000
- Installing on the FNIRSI GC-01
- Rad Pro simulator
- Installing on other devices
- Rad Pro's user interface is based on the OpenBridge 4.0 design system.
- Thanks to
Alfred90,danielhahn76,felixsteghofer,DG0MG,murkle,cromagn,ivohar,mryndzionek,JantarX,mizsha,Tig3rch3n,Arparela,w01fdev,martin-machacek,dsl71,Davegsm82,alfmck,jonwhite227,dc1rdband many others who helped with device testing and suggestions. - Thanks to
pixithafor the FS2011/GD32F150 board photo with a J305 Geiger tube,felixsteghoferfor the FS2011/GD32F103 board photo,DG0MGfor the Bosean FS-600 board photo,murklefor the Bosean FS-1000 board photo, andivoharfor the FNIRSCI GC-01 schematics.
