Skip to content

HJebbour/HP-Z640-Hackintosh

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

18 Commits
 
 
 
 
 
 

Repository files navigation

macOS on HP Z640 (Haswell-E)

OpenCore-based EFI for HP Z640 (Haswell-E) HP Z640

Status: Fully Working | Stable | Daily driver

macOS Version OpenCore Model

This project was created from scratch using the Dortania guide specifically for the HP Z640, but should work on the Z440 and Z480 with a few adjustments.

DISCLAIMER: As you embark on your Hackintosh journey you are encouraged to READ the entire README and Dortania guides before you start.

This Z640 Hackintosh project aims to be an all-in-one maintained hub for Opencore-based hackintoshes on the HP Zx40 family. In short, this Z640-Hackintosh is very stable and is currently my daily driver. I fully recommend this project to anyone looking for an old Mac Pro alternative.

This OpenCore-EFI should work as is with macOS Catalina, Big Sur, Monterey, Ventura, Sonoma and Sequoia (DP1).

You can find a wealth of knowledge on Reddit, TonyMacX86 or Google.

Important: In order to upgrade to macOS 14.4+ the value of Misc -> Security -> SecureBootModel must be set to Disabled in config.plist until the upgrade completely finishes.

Should you find an error, or improve anything, be it in the config itself or in the my documentation, please consider opening an issue or a pull request to contribute.

I am not responsible for any damages you may cause.

Summary

WORKING ✅

Video and Audio

Feature Status Dependency Remarks
Full Graphics Accleration (QE/CI) WhateverGreen.kext AMD Radeon RX 580 is natively supported on macOS
Audio Output (Front/Back) AppleALC.kext with Layout ID = 11 -
Audio Input (Front/Back) AppleALC.kext with Layout ID = 11 -
Internal Speaker AppleALC.kext with Layout ID = 11 -
Automatic Headphone Output Switching AppleALC.kext with Layout ID = 11 -
DRM dGPU -

Power Management

Feature Status Dependency Remarks
CPU Power Management SSDT-PLUG.aml -
NVMe Compatibility NVMeFix.kext & Innie.kext Improves NVMe compatibility with non-Apple SSDs
Sleep / Wake - -

Connectivity

Feature Status Dependency Remarks
Wi-Fi OpenCore Legacy Patcher Follow this guide to properly enable Wi-Fi and Bluetooth with macOS Sonoma. Wi-Fi is natively supported on previous macOS versions, no need to use OCLP.
Bluetooth OpenCore Legacy Patcher Follow this guide to properly enable Wi-Fi and Bluetooth with macOS Sonoma. Bluetooth is natively supported on previous macOS versions, no need to use OCLP.
Ethernet IntelMausi.kext -
USB 2.0 / USB 3.0 USBMap.kext Create your own USBMap.kext using CorpNewt
USB Power Properties in macOS - -

macOS Continuity

Feature Status Dependency Remarks
iCloud, iMessage, FaceTime Whitelisted Apple ID, Valid SMBIOS See Dortania / OpenCore-Install-Guide -
AirDrop - -
Universal Control - -
Apple Watch Auto Unlock - -
Instant Hotspot - -
Continuity Markup and Sketch - -
Handoff - -
Universal Clipboard - -
SMS & Phone Call via iPhone - -
AirPlay to Mac - -

Miscellaneous

Feature Status Dependency Remarks
Multiple Boot - macOS, Windows, and Linux distributions (Use this guide to setup dual boot on the same drive)
Boot chime - Working like a charme
NOT WORKING ❌
Feature Status Dependency Remarks
Sidecar - Cannot work on this machine as the there's no iGPU
Continuity Camera - Cannot work on this machine as the there's no iGPU
FireVault 2 - Cannot work when SecureBootModel is Disabled for OCLP

Introduction

THIS IS NOT A GUIDE!

This is not a guide. It shoud only be used as a reference. I provide some tips and tricks I learned on my journey in building a hackintosh. The best way of using this is as a supplement to the OpenCore guide. If you have questions about how to setup your specific hardware, are unclear about what to do, or would like to see the settings I've used.

I understand that some may simply add the OC and Boot folders to their EFI folder. For clarity the EFI partition needs a folder called EFI that contains the Boot and OC folder.

EFI (drive)
	EFI
	├── BOOT
	├── OC

It should work and your HP Z640 should boot and work fine. You will at minimum need to generate SMBIOS values if you want Apple services to work. Note that all error reporting/logging has been turned off in the config.plist. You will have a difficult time trouble shooting with the setup provided. You can easily turn on the error reporting and logging if you follow the Dortania guide. Best of luck.

NOTE if you simply wish to copy my EFI please do the following:

  1. Generate SMBIOS values and add them in the config.plist (Use MacPro7,1 or iMacPro1,1)
  2. Ensure the value of showpicker is true in the config.plist file to provide the opencore menu when booting.
  3. Prepare your install USB
  4. Move the entire EFI folder (with your modifications) to the proper partition on your USB (or SSD once the install is complete).
  5. Install - You'll need to select Escape to get the boot menu options and boot from the USB each time the computer restarts until you've copied the EFI folder onto the hard drive. You may also need to select the correct boot option during install.
THIS IS A GUIDE!

The one and only guide to install macOS, provided by Dortania

HARDWARE

HP Z640 (Haswell-E)

These are relevant components on my machine which may differ from yours, keep these in mind as you will need to adjust accordingly, depending on your machine's configuration.

Category Component Note
CPU Intel Xeon E5-2699 v3 18-core (2,30 GHz) -
GPU AMD Radeon RX 580 8 GB -
SSD WDC PC SN720 SDAQNTW-512G-1001 Using PCIe to M.2 adapter
Memory 72 GB 2133 MHz DDR4 -
Wi-Fi & BT Fenvi T919 (Broadcom) -
BIOS M60 v02.61 23/03/2023 Latest version to this date

Refer to HP Z640 Specs for possible stock configurations.

SOFTWARE
Component Version
OpenCore 1.0.0
macOS Sonoma 14.5
Windows 11 23H2
Ubuntu 22.04.4 LTS
Fedora 40
ESXi 8
Proxmox 8.2
ACPI
Component
SSDT-EC
SSDT-PLUG
SSDT-RTC0-RANGE
SSDT-UNC
SSDT-HPET
SSDT-USBX
KEXT
Kext Version
Lilu 1.6.7
VirtualSMC 1.3.2
AppleALC 1.9.0
IntelMausi 1.0.7
NVMeFix 1.1.1
Innie 1.3.1
SMCProcessor 1.3.2
SMCSuperIO 1.3.2
RestrictEvents 1.1.3
AMFIPass 1.4.0
WhateverGreen 1.6.6
USBMap -
RTCMemoryFixup 1.0.7
IOSkywalkFamily -
IO80211FamilyLegacy -
UEFI DRIVERS
Driver Version
OpenRuntime.efi OpenCorePkg 1.0.0
OpenCanopy.efi OpenCorePkg 1.0.0
OpenHfsPlus.efi OpenCorePkg 1.0.0
AudioDxe.efi OpenCorePkg 1.0.0
ResetNvramEntry.efi OpenCorePkg 1.0.0
ToggleSipEntry.efi OpenCorePkg 1.0.0
OTHER REPOSITORIES
CREDITS

Credit to all these great people whom I don't know but have made my hackintosh dreams a reality:

SCREENSHOTS

Neofetch & About This Mac Multiboot: Windows 11, Ubuntu, Fedora, ESXi, Proxmox, and macOS Experimental support of macOS Sequoia

Pre-Installation

UEFI SETTINGS

Security

  • System Security
    • Virtualization Technology (VT-x) Enable
    • Intel VT for Directed I/O (VT-d) Disable

Advanced

  • Boot Options

    • Fast Boot Disable
    • S5 Wake On LAN Disable
  • Device Configurations

    • SATA Controller Mode AHCI
  • Secure Boot Configuration

    • Configure Legacy Support and Secure Boot Disable Legacy Support and Disable Secure Boot
  • Performance Options

    • Intel Hyper-Threading Technology Enable
ADJUSTMENTS

Broadwell-E

To enable support for Xeon v4 CPUs, you must change the following values in Kernel -> Emulate under your config.plist file:

  • Cpuid1Data: D4060300 00000000 00000000 00000000
    • Fake CPUID entry
  • Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000
    • Mask for fake CPUID

Haswell-E

To enable support for Xeon v3 CPUs, you must change the following values in Kernel -> Emulate under your config.plist file (Already configured in the included EFI folder):

  • Cpuid1Data: C3060300 00000000 00000000 00000000
    • Fake CPUID entry
  • Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000
    • Mask for fake CPUID

Z840 Support

  • 2nd LAN port must be disabled in BIOS for Z840 workstations
  • Add the following kexts to enable SAS controller
    • AstekFusion2Family.kext
    • AstekFusion2Adapter.kext
KEYBOARD LAYOUT

Either add as a String or as a Data (HEX Data ProperTree)

Format is lang-COUNTRY:keyboard

🇺🇸 | [0] en_US - U.S --> en-US:0 --> (656e2d55 533a30 in HEX)

Key Type Value
prev-lang:kbd String en-US:0

Pick your keyboard layout here:

AppleKeyboardLayouts.txt

Post-Installation

OpenCore Installation
  1. Move the entire EFI folder from the prepared USB (with your modifications) to the EFI partition on your hard drive or SSD.
  2. If you have a Broadcom wireless card (Wi-Fi & Bluetooth) use the OpenCore Legacy Patcher. The EFI folder is already prepared for OCLP.