Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Playback of an RTSP stream no longer works via VLC player #272

Closed
Blackbox-git opened this issue Oct 17, 2021 · 13 comments
Closed

Playback of an RTSP stream no longer works via VLC player #272

Blackbox-git opened this issue Oct 17, 2021 · 13 comments

Comments

@Blackbox-git
Copy link

Issue

Up to the rpi-firmware (stable-branch) mentioned below, I was able to display the stream of my network camera using the following command. If I update the firmware to a newer one, the VLC player starts, but no picture appears.

The command

DISPLAY=:0 vlc rtsp://Username:Password@IP-Adress/11--quiet --rtsp-tcp --noaudio --fullscreen --no-qt-privacy-ask --no-video-title --network-caching=500 --sout-mux-caching=500

Addtion

The problem is reproducible on a second Raspberry Pi.
@Blackbox-git
Copy link
Author

Bild1

@popcornmix
Copy link
Collaborator

Are you able to test releases on master branch to narrow it down further?

@Blackbox-git
Copy link
Author

Okay, ich will do this tomorrow. If i am reday i will give feedback.

@Blackbox-git
Copy link
Author

I found the commit on the master branch where the vlc player is starting, but dosen´t show the rtsp stream in the opening window.

PS: My camera is reachable over a public domain with a guest account. If you want to test the behaviour i can send you the data.

@Blackbox-git
Copy link
Author

failure

@popcornmix
Copy link
Collaborator

Thanks, looks like a duplicate of RPi-Distro/vlc#48

Does your rtsp stream change resolution?
We may be interested in accessing the stream if we don't find a simpler way of reproducing issue.

@6by9 6by9 mentioned this issue Oct 18, 2021
Closed
@Blackbox-git
Copy link
Author

Blackbox-git commented Oct 18, 2021 •
edited
Loading

The connected screen has 10" and a resolution of 1024 x 600. This is stored accordingly in config.txt. Until this update, everything looked perfect.

The stream itself has a resolution of 1920x1080. I think, but the behaviour is also with a Full-HD monitor.

I have opened a separate DNS address for you to test. The IP is updated from a Raspberry.

Here is the command line command for the stream:

DISPLAY=:0 vlc rtsp://guest:testcam@camtest.dnsuser.de:554/11 --quiet --rtsp-tcp --noaudio --fullscreen --no-qt-privacy-ask --no-video-title --network-caching=500 --sout-mux-caching=500

@6by9
Copy link

6by9 commented Oct 18, 2021

Thank you.

As I've just noted on RPi-Distro/vlc#48 I've reproduced the issue against the Youtube link they provided there. Testing the fix against your stream also appears to work, so it looks to be good.
The patch is now pushed for internal review, and then release.

@popcornmix
Copy link
Collaborator

See RPi-Distro/vlc#48 for test firmware.

@Blackbox-git
Copy link
Author

Blackbox-git commented Oct 19, 2021 •
edited
Loading

First of all thx for your work. I can confirm that this firmware works for me.

However, since I am not a programmer, I have two additional questions.

  1. How does this firmware get to stable now?

  2. And more importantly, what do I need to set up so that I can get new kernel versions installed again in the future via the command "apt full-upgrade" after playing around with rip-update?

@pelwell
Copy link
Collaborator

pelwell commented Oct 19, 2021

  1. It will get there eventually, when we decide that enough has changed to make it worthwhile or that sufficient time has elapsed since the last update.
  2. You don't need to take any special action - both update mechanism are unaware of the other and will happily overwrite files installed by the other,

popcornmix added a commit to raspberrypi/firmware that referenced this issue Oct 19, 2021
@popcornmix
firmware: video_decode: i/p port enable/disable without o/p active co…
d2ab264 
…uld stall

See: RPi-Distro/vlc#48
See: Hexxeh/rpi-firmware#272
See: #1637
popcornmix added a commit to raspberrypi/rpi-firmware that referenced this issue Oct 19, 2021
@popcornmix
firmware: video_decode: i/p port enable/disable without o/p active co…
ffdfc6e 
…uld stall

See: RPi-Distro/vlc#48
See: Hexxeh#272
See: raspberrypi/firmware#1637
@popcornmix
Copy link
Collaborator

Fix now in rpi-update firmware

@Blackbox-git
Copy link
Author

Thx if updated and tested it. It works for me.

@pelwell pelwell closed this as completed Oct 19, 2021
mkreisl added a commit to xbianonpi/xbian-package-firmware that referenced this issue Dec 3, 2021
@mkreisl
verup and ...
78edc9e 
- firmware: isp: Fix handling of different YUV colour spaces

- firmware: poe_hat: Actually close the I2C handle

- firmware: platform: Define DVFS modes and change default to be fixed AVS voltage

- firmware: arm_loader: Auto-select 64-bit for kernel8.img
  See: #1193

- firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun

- firmware: platform: Define DVFS modes and change default to be fixed AVS voltage

- firmware: arm_loader: Auto-select 64-bit for kernel8.img
  See: #1193

- firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun

- firmware: video_decode lockup handling

- firmware: isp: Initialise extras to avoid vpitch being random

- firmware: usb: Fix dropouts with USB ethernet gadget
  See: raspberrypi/linux#4084

- firmware: imx477: Allow long exposures for the binned modes.
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=297521

- firmware: arm_dispmanx: Use ALPHA_MIX flag
  See: https://www.raspberrypi.org/forums/viewtopic.php?t=300769

- firmware: power: Refactor the interface to the PMICs

- firmware: platform: vl805: Get BAR2 address from PCIe BAR2 registers

- firmware: arm_loader: Return all borrowed DMA channels
  See: #1541

- firmware: hdmi_2711: Rework I2C driver to NOT use the AUTO-I2C block

- firmware: gencmd: Allow groups of clocks/plls to be read together

- firmware: power: Fix DA9090 under-voltage detection

- firmware: NVME boot support

- firmware: brfs: Fix USB bulk-read in start.elf
  See: Hexxeh/rpi-firmware#258

- firmware: hdmi_2711_i2c: Correct handling of start/stop codes for long read
  See: #1548

- firmware: video_decode: For VC1/WMV with no signalled header bytes, use start of 1st buffer
  See: raspberrypi/linux#4113

- firmware: vl805: Remove redundant log statement and fix warning

- firmware: power: Fix DA9090 ADC1 register definition

- firmware: arm_loader: Only report clocks arm has set, not siblings

- firmware: arm_loader: Don't report clocks set as turbo side effect of arm clock

- firmware: arm_loader: 2711: gpu clocks are not dependant

- firmware: platform: Need to clear cached versions of get_max_clock_internal vars

- firmware: Move core to PLLA and support accurate clk108
  See: xbmc/xbmc#19263

- firmware: board_info: Separate memory size from OTP field encoding

- firmware: power: Swap DA9090 ADC assignments to match XR77004

- firmware: board-info: Fix memsize on 3B+

- firmware: vcfw/power: Add a new latch for power_pad_control
  See: #1552

- firmware: arm_loader: kernel_old=1 should force kernel_address=0
  See: #1561

- firmware: scalerlib: Fix offset applied to x coordinate of YUV10COL image
  See: https://forum.kodi.tv/showthread.php?tid=361164&pid=3024654#pid3024654

- firmware: isp: Ensure the VRF is locked when setting up video colour denoise
  See: raspberrypi/rpicam-apps#19

- firmware: isp: Remove custom EV mappings from camera tunings

- firmware: Add support for board-type=0xXX conditional filters in bootloader, bootcode and firmware

- firmware: Two UART1 patches
  See: #1566

- firmware: Pi400: Reduce MII clock freq when probing ethernet PHY

- firmware: platform: Remove build-time constant for MICROVOLTS_PER_PIP

- firmware: dt-blob.dts: Correct HDMI HPD and EMMC_ENABLE for CM4
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&p=1858516

- firmware: vcfw/hdmi: CUSTOM modes used for FKMS didn't set RGB quant range correctly
  See: #1580

- firmware: PoE+ HAT support
  See: raspberrypi/linux#4367

- firmware: arm_loader: Use Pi4 bootloader MAC_ADDRESS if set

- firmware: platform: Apply ARM thermal throttling rules on BCM2711

- firmware: bcm_host: Recognise all Pi 4 variants, add BCM2711
  See: raspberrypi/userland#695

- firmware: video_decode: Use the ISP instead of vc_image_convert

- firmware: hdmi-2711: Wait for HDMI hardware scheduler to activate in HDMI mode

- arm_loader: Add message to release firmware framebuffer

- firmware: arm_loader: Add rng-seed DT property
  See: #1595

- firmware: isp: Set the YUV420/YVU420 format stride to 64 byte

- firmware: Revert: video_decode: Use the ISP instead of vc_image_convert

- firmware: cec: Avoid sending messages with kms
  See: raspberrypi/linux#4460

- firmware: hdmi_cec: Remove TX/RX SW_INIT on power_on
  See: Hexxeh/rpi-firmware#267
  See: https://www.raspberrypi.org/forums/viewtopic.php?p=1895082#p1895082

- firmware: arm_dt: Limit CMA to 256MB if total_mem < 2GB or gpu_mem > 256MB
  See: #1603

- firmware: video_decode: Use the ISP instead of vc_image_convert

- firmware: video_decode: Correct support for YVU formats using ISP

- firmware: firmware: Disable VLL loading from file system
  See: #1605

- firmware: arm_loader: Make most arm clock requests required
  See: #1598

- firmware: arm_loader: Consider required flags from GET_CLOCK_RATE
  See: #1598

- firmware: arm_dt: Load overlays for detected cameras

- firmware: Make more use of the user-warnings DT property

- firmware: hdmi_2711: Use HDMI block REPEAT_PIXEL instead of PV
  See: https://forum.libreelec.tv/thread/24415-le-10-beta-for-i4-force-hdmi-resolution

- firmware: DSI display autodetection for kms

- firmware: arm_loader: Allow hvs interrupt during SET_NOTIFY_DISPLAY_DONE

- firmware: arm_display: Allow null buffer in successful call
  See: raspberrypi/linux#4540

- firmware: video_decode: Ensure all buffers are flushed before port disable completes

- firmware: filesystem: sdcard: Fix Hybrid GPT partitions
  See: #1465

- firmware: tvservice: Add check to warn when running with kms

- firmware: arm_loader: Allow non-optional reads of current clock
  See: #1619

- firmware: dispmanx: Demote null eptr from vcos_verify to no warning
  See: raspberrypi/linux#4592

- firmware: filesystem: sdcard: Probe FAT type in GPT ESD partitions

- firmware: clock-2711: Limit PLLB VCO frequency to the high range

- firmware: arm_dt: Export the boot-mode, partition and usb state via device-tree
  See: #1621

- firmware: video_decode: i/p port enable/disable without o/p active could stall
  See: RPi-Distro/vlc#48
  See: Hexxeh/rpi-firmware#272
  See: #1637

- firmware: userland: Reduce debug_sym error messages
  See: https://forums.raspberrypi.com/viewtopic.php?f=98&t=322238

- firmware: arm_dt: Increase maximum line length to 98
  See: raspberrypi/linux#4638

- firmware: arm_loader: Allow VEC clock to be controlled by arm

- firmware: platform: Remove licence on VP6, VP8, Theora, and FLAC
  See: raspberrypi/linux#4661

- firmware: ISP: Fix magenta colour in right hand image of stereo pair
  See: https://forums.raspberrypi.com/viewtopic.php?t=321089

- firmware: platform: Fix incorrect turbo voltage scaling on Pi0
  See: raspberrypi/documentation#2255

- firmware: platform: Declare CM4's SIO_1V8_SEL and SD_PWR_ON
  See: raspberrypi/Raspberry-Pi-OS-64bit#188

- firmware: hello_fft: Update outdated link to V3D spec

- firmware: hello_fft: Remove unused function declaration
  See: #1645
  See: raspberrypi/userland#710

- firmware: dtoverlay: Rebase aliases in overlays like labels

- firmware: isp: Set core/vpu min clock to 320Mhz during ISP operation

- firmware: arm_loader: Enable watchdog early if wanted
  See: #1651

- firmware: board_info: Add upstream dtb names for cm1 & 3

- firmware: board_info: Add upstream dtb name for cm4
  See: #1660

- firmware: platform: Allow users to disable camera boot HMAC check
  See: #1657

- firmware: clock: 2711: Fix potential API issue in 2711 VCO setup

- firmware: arm_loader: Enable USB MSD boot mode on Zero 2 W

- firmware: isp: Fix Rec.709 colour space problems
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@popcornmix @6by9 @pelwell @Blackbox-git