A laser cut and bent single piece bed concept, trying to implement a lightweight and stiff bed with full access to the mounting screws similar to the flatbed concept, but ditching the printed plastic parts
Lasercutting is surprisingly cheap - I got offers for manufacturing in small series for prices similar to the cast and machined bed which is mounted on top. Note that additional surface treatment steps will add to the cost.
I only did a small prototype run and will not be able to sell it myself, however there are a few Voron related shops that started stocking it:
- Deepfriedhero (US)
- Fabreeko (US)
- 3dmakerparts (US)
- Printyplease (UK)
I will add additional suppliers with a vendor role on the Voron discord - please contact me on discord or create a pull request with your discord ID.
The sheet metal part is available under CC-BY-SA 4.0 AND GPL V3.0. The plastic parts are partially derived from the existing Voron parts and hence follow the same License, GPL V3.0.
This means you are allowed to modify and share the part under either license, as long as you credit me with a link to this Github repository. You are allowed to produce and sell the part without any royality cost, a donation on vorondesign.com to fund future development of the Voron project is however appreciated.
https://en.wikipedia.org/wiki/Kirigami
- 1x Kirigami Bed
- 8x M2x4 to mount the bed to the carriages
- 4x M3 Heatsets + 4x M3 screws for the leadscrew mount
- 4x M3 Heatsets + M3 screws for the igus chain mount
- 2x M3 Heatsets + M3 screws for the belt chain mount
