Segmented Tag SLT‐EM007 UK version
Segmented Display EPaper Pricetag, display segments are directly printed onto the PCB itself. The version on the pictures below is branded Samsung Electro-mechanics, before the spinoff to Solum occurred.
- ZBS 243 / SEM9110 8051 based core, 64kbyte flash, 8kbyte XRAM, 256 bytes iRAM 16 MHz, 802.15.4 2.4Ghz radio
- SEM9010 - Segmented ePaper controller, somewhat similar to SSD1623L2
Uses the same pinout as the SLT-EM104:
Be careful; the first column of pins carry EPD-waveforms, these are considered 'high' voltages for devices expecting logic level signals. Connecting these to a microcontroller might not end too well
The jig for 'segmented' tag can be used for programming, which can be found here
| ZBS243 Pin | ePaper controller | Note |
|---|---|---|
| P2.0 | EPD_Busy | |
| P2.1 | _CS | Active low |
| P2.2 | Power | |
| P1.7 | _RESET | Active low |
| P1.6 | EXT_CLK | This is a 'function' on this pin on the ZBS243 |
| P0.0 | SPI_CLK | |
| P0.1 | MOSI | |
| P0.2 | MISO |
| Version | Type | MD5 (first 10kbyte) | Original Tag Mac (as written on case) | Note |
|---|---|---|---|---|
| ??? | SLT-EM007 | A27D978C48888FA045E8D3F90DC27029 | 840B2D904BB90131 |