Tiny-T (revision 2.0)

Tiny-T is a Voron Trident with build volume 150mm^3.

Source: https://github.com/VoronDesign/Voron-Trident

License: License

Changes: Tiny-T "branding" and scale modelling down.

Changes from revision 1.0 to revision 2.0

• With the addition of the tophat, the vertical extrusions are now back to 400mm, according to Trident specifications
• Side, Front and Rear panels have reduced their height by also 25mm
• Single front door
• New door hinges and handles
• New rear panel with mounting holes for the air filter
• New bed design that support M3 screws to hold the build plate aligned

Important: if ordering panels from vendors, make sure they are using the latest DXF files

Frame Specs

If ordering from Misumi, these are the specs:

Misumi HFSB5-2020-400-LCP-RCP-AV260		4 (corner extrusion)
Misumi HFSB5-2020-270-TPW 			9 (top, bottom, front[top/bottom], rear top extrusions)
Misumi HFSB5-2020-270-AH135-TPW 		1 (rear bottom extrusion)
Misumi HFSB5-2020-230-LTP			1 (rear Z extrusion)
Misumi HFSB5-2020-230				1 (x gantry extrusion)
Misumi HFSB5-2020-140				1 (rear gantry extrusion)
Misumi HFSB5-2020-270-AH135			1 (bed extrusion)
Misumi HFSB5-2020-132-LTP			1 (bed extrusion)

Components

• 2x 1200mm (120cm) GATE belts
• 6x Linear Rail MGN9H 200mm - Ali Express
• 150mmx150mm bed - Mandala Roseworks
• 150mm PEI Flex build plate - Ali Express
• 120mmx120mm 120w 24v heating pad - Keenovo
• LDO Orbiter Extruder kit - Fabreeko OR LDO Galileo Clockwork kit - Fabreeko
• 2x LDO NEMA 17 stepper motors - Printed Solid
• 3x V0.1 Z Stepper motor with 150mm lead screw - Fabreeko
• 3x GE5C bearings - Deep Fried Hero, Ali Express
• FYSETC V2.1 RGB Mini 12864 - Amazon
• Amplifier Cabinet - Amazon, Ali Express

Mods used

• Boop by Yeri
• RSCS by Derpimus and DoubleT
• Panel Support Clips by wile-e
• Tophat by jakub874