AXI SystemVerilog Modules for High-Performance On-Chip Communication

This repository provides modules to build on-chip communication networks adhering to the AXI4 or AXI4-Lite standards. For high-performance communication, we implement AXI4+ATOPs from AXI5. For lightweight communication, we implement AXI4-Lite. We aim to provide a complete end-to-end communication platform, including endpoints such as DMA engines and on-chip memory controllers.

Our design goals are:

• Topology Independence: We provide elementary building blocks such as protocol multiplexers and demultiplexers that allow users to implement any network topology. We also provide commonly used interconnecting components such as a crossbar.
• Modularity: We favor design by composition over design by configuration where possible. We strive to apply the Unix philosophy to hardware: make each module do one thing well. This means you will more often instantiate our modules back-to-back than change a parameter value to build more specialized networks.
• Fit for Heterogeneous Networks: Our modules are parametrizable in terms of data width and transaction concurrency. This allows to create optimized networks for a wide range of performance (e.g., bandwidth, concurrency, timing), power, and area requirements. We provide modules such as data width converters that allow to join subnetworks with different properties, creating heterogeneous on-chip networks.
• Full AXI Standard Compliance.
• Compatibility with a wide range of (recent versions of) EDA tools and implementation in standardized synthesizable SystemVerilog.

The design and microarchitecture of the modules in this repository is described in this paper. If you use our work in your research, please cite it.

List of Modules

Name	Description	Doc
axi_atop_filter	Filters atomic operations (ATOPs), i.e., write transactions that have a non-zero aw_atop value.
axi_burst_splitter	Split AXI4 burst transfers into single-beat transactions.
axi_cdc	AXI clock domain crossing based on a Gray FIFO implementation.
axi_cut	Breaks all combinatorial paths between its input and output.
axi_delayer	Synthesizable module which can (randomly) delays AXI channels.
axi_demux	Demultiplexes an AXI bus from one slave port to multiple master ports.	Doc
axi_dw_converter	A data width converter between AXI interfaces of any data width.
axi_dw_downsizer	A data width converter between a wide AXI master and a narrower AXI slave.
axi_dw_upsizer	A data width converter between a narrow AXI master and a wider AXI slave.
axi_err_slv	Always responds with an AXI decode/slave error for transactions which are sent to it.
axi_id_prepend	This module prepends/strips the MSB from the AXI IDs.
axi_intf	This file defines the interfaces we support.
axi_isolate.sv	A module that can isolate downstream slaves from receiving new AXI4 transactions.
axi_join	A connector that joins two AXI interfaces.
axi_lite_demux	Demultiplexes an AXI4-Lite bus from one slave port to multiple master ports.	Doc
axi_lite_join	A connector that joins two AXI-Lite interfaces.
axi_lite_mailbox	A AXI4-Lite Mailbox with two slave ports and usage triggered irq.	Doc
axi_lite_mux	Multiplexes AXI4-Lite slave ports down to one master port.	Doc
axi_lite_regs	AXI4-Lite registers with optional read-only and protection features.	Doc
axi_lite_to_apb	AXI4-Lite to APB4 protocol converter.
axi_lite_to_axi	AXI4-Lite to AXI4 protocol converter.
axi_lite_xbar	Fully-connected AXI4-Lite crossbar with an arbitrary number of slave and master ports.	Doc
axi_modify_address	A connector that allows addresses of AXI requests to be changed.
axi_multicut	AXI register which can be used to relax timing pressure on long AXI buses.
axi_mux	Multiplexes the AXI4 slave ports down to one master port.	Doc
axi_pkg	Contains AXI definitions, common structs, and useful helper functions.
axi_serializer	Serializes transactions with different IDs to the same ID.
axi_test	A set of testbench utilities for AXI interfaces.
axi_to_axi_lite	AXI4 to AXI4-Lite protocol converter.
axi_xbar	Fully-connected AXI4+ATOP crossbar with an arbitrary number of slave and master ports.	Doc

Atomic Operations

AXI4+ATOPs means the full AXI4 specification plus atomic operations (ATOPs) as defined in Section E2.1 of the AMBA5 specification. This has the following implications for modules that do not implement ATOPs and systems that include such modules:

• Masters that do not issue ATOPs must set aw_atop to '0.
• Slaves that do not support ATOPs must specify this in their interface documentation and can ignore the aw_atop signal.
• System designers are responsible for ensuring that
  1. slaves that do not support ATOPs are behind an axi_atop_filter if any master could issue an ATOP to such slaves and
  2. the aw_atop signal is well-defined at the input of any (non-AXI4-Lite) module in this repository.

Masters and slaves that do support ATOPs must adhere to Section E2.1 of the AMBA5 specification.