Test Cases Elygtl

Elygtl

To add the external Ely-Jordan GTL method in ucvm_query, the user would supply elygtl:ely in the model list and may include the optional z-range for the interpolation range. If not supplied, a default of 0 to 350 is assumed.

./ucvm_query -f ../conf/ucvm.conf -m cvms5,elygtl:ely -z 0,350

with input data (cvms5 with use_gtl=off)

 -118.0000    34.0000      0.000
 -118.0000    34.0000     50.000
 -118.0000    34.0000    100.000
 -118.0000    34.0000    250.000
 -118.0000    34.0000    300.000
 -118.0000    34.0000    350.000
 -118.0000    34.0000    400.000

result:

 
 -118.0000    34.0000      0.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202     elygtl      0.000    468.400      0.000        ely    884.192    234.200   1143.546
 -118.0000    34.0000     50.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202     elygtl      0.000    468.400      0.000        ely   2203.489    711.726   1990.240
 -118.0000    34.0000    100.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202     elygtl      0.000    468.400      0.000        ely   2393.050    874.489   2058.621
 -118.0000    34.0000    250.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202     elygtl      0.000    468.400      0.000        ely   2387.138   1117.435   2056.630
 -118.0000    34.0000    300.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202     elygtl      0.000    468.400      0.000        ely   2353.512   1158.983   2045.136
 -118.0000    34.0000    350.000    281.668    468.400      cvms5   2330.334   1187.775   2175.202       none      0.000      0.000      0.000      crust   2330.334   1187.775   2175.202
 -118.0000    34.0000    400.000    281.668    468.400      cvms5   2397.913   1227.419   2188.256       none      0.000      0.000      0.000      crust   2397.913   1227.419   2188.256

Plotting depth profile with varying parameters

./plot_depth_profile.py -s 34,-118 -b 0  -e 1000 -d vs -v 50 -c cvms5 -z 0,350 -o cvms5_noGTL.png
./plot_depth_profile.py -s 34,-118 -b 0  -e 1000 -d vs -v 50 -c cvms5,elygtl:ely -z 0,350 -o cvms5_noGTL_elygtl_full.png
./plot_depth_profile.py -s 34,-118 -b 0  -e 1000 -d vs -v 50 -c cvms5,elygtl:ely -z 200,350 -o cvms5_noGTL_elygtl_part.png 

Baseline CVMS5 with no internal or external GTLs,

With external Elgtl GTL and z-range from 0 to 350,

With external Elygtl GTL and z-range from 200 to 350,

Using internal GTL in cvms5 (use_gtl=on),

./plot_depth_profile.py -s 34,-118 -b 0  -e 1000 -d vs -v 50 -c cvms5 -z 0,350 -o cvms5_GTL.png

Plotting cross sections

Baseline with no gtl and no Elygtl,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5 -z 0,3
50  -a d -s 0 -e 1000 -o cross_cvms5_nogtl.png

Enable Elygtl with range of 0-350,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5,elygtl
:ely -z 0,350  -a d -s 0 -e 1000 -o cross_cvms5_nogtl_elygtl.png

Enable Elygtl and use Z-range of 0-800,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5,elygtl
:ely -z 0,800  -a d -s 0 -e 1000 -o cross_cvms5_nogtl_elygtl_2.png

Turn on GTL in model/cvms5/data/config with no Elygtl,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5 -z 0,3
50  -a d -s 0 -e 1000 -o cross_cvms5_nogtl.png

Turn on GTL in model/cvms5/data/config with Elygtl and Z-range of 0-350,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5,elygtl
:ely -z 0,350  -a d -s 0 -e 1000 -o cross_cvms5_gtl_elygtl.png

Turn on GTL in model/cvms5/data/config with Elygtl and Z-range of 0-800,

./plot_cross_section.py -b 34.5,-116 -u 34.5,-113 -h 1000 -v 10 -d vs -c cvms5,elygtl
:ely -z 0,800  -a d -s 0 -e 1000 -o cross_cvms5_gtl_elygtl.png