[Radarr] Won't start on DS715 after upgrade to version 20210311-15 #4546

schumi2004 · 2021-04-08T17:43:54Z

Setup

Package Name: Radarr
Package Version: 20210311-15

NAS Model: DS715
NAS Architecture: Alpine
DSM version: 6.2.4-25556

Package Name: Mono
Package Version: 5.20.1.34-17

Expected behavior

The package should start normally from Package Center

Actual behavior

After clicking 'Run' in Package Center a windows pops up with the message 'Failed to run package service'.

Steps to reproduce

1. Installed the given update, but also a clean installation causes this behavior. v20210311-15
2. Removing and manual installing version v20201214-13 makes it work again, upgrading then brakes it.

Package log

_find logfiles in /var/packages/{package}/var/, for DSM7: /var/log/packages/{package}.log, for DSM < 6.0: protocol in Package Center.
_

radarr.log 
Thu Apr  8 18:59:37 CEST 2021
Starting radarr command env HOME=/volume1/@appstore/radarr/var LD_LIBRARY_PATH=/volume1/@appstore/radarr/lib /volume1/@appstore/radarr/share/Radarr/bin/Radarr 

radarr_install.log 
Thu Apr  8 17:41:01 CEST 2021
===> Step preuninst. USER=radarr GROUP=sc-download SHARE_PATH=
Removing service configuration radarr.sc
Thu Apr  8 17:41:03 CEST 2021
===> Step postuninst. USER=radarr GROUP=sc-download SHARE_PATH=
Removing user sc-radarr
Thu Apr  8 17:43:56 CEST 2021
===> Step preinst. USER=radarr GROUP=sc-download SHARE_PATH=
Thu Apr  8 17:43:58 CEST 2021
===> Step postinst. USER=radarr GROUP=sc-download SHARE_PATH=
Installing service configuration /var/packages/radarr/conf/radarr.sc
Adding 'sc-radarr' to 'sc-download'
Group Name: [sc-download]
Group Type: [AUTH_LOCAL]
Group ID:   [65536]
Group Members: 
0:[autosub]
1:[nzbget-testing]
2:[sc-nzbdrone]
3:[sc-transmission]
4:[sc-bazarr]
5:[sc-radarr]
Invoke service_postinst
Granting 'sc-radarr' unix ownership on /volume1/@appstore/radarr/var/.config
Granting 'sc-radarr' unix ownership on /volume1/@appstore/radarr/var
Thu Apr  8 18:34:53 CEST 2021
===> Step preuninst. USER=radarr GROUP=sc-download SHARE_PATH=
Removing service configuration radarr.sc
Thu Apr  8 18:34:54 CEST 2021
===> Step postuninst. USER=radarr GROUP=sc-download SHARE_PATH=
Removing user sc-radarr
Thu Apr  8 18:37:15 CEST 2021
===> Step preinst. USER=radarr GROUP=sc-download SHARE_PATH=
Thu Apr  8 18:37:16 CEST 2021
===> Step postinst. USER=radarr GROUP=sc-download SHARE_PATH=
Installing service configuration /var/packages/radarr/conf/radarr.sc
Adding 'sc-radarr' to 'sc-download'
Group Name: [sc-download]
Group Type: [AUTH_LOCAL]
Group ID:   [65536]
Group Members: 
0:[autosub]
1:[nzbget-testing]
2:[sc-nzbdrone]
3:[sc-transmission]
4:[sc-bazarr]
5:[sc-radarr]
Invoke service_postinst
Granting 'sc-radarr' unix ownership on /volume1/@appstore/radarr/var/.config

Other logs

/var/log/messages`_

2021-04-08T18:34:56+02:00 DS715 synocgitool: hook[user_delete] Username (sc-radarr) deleted. - Kick user[sc-radarr]
2021-04-08T18:34:57+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[20590]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:37:16+02:00 DS715 synoscgi_SYNO.Core.Package.Installation_1_install[27071]: resource_api.cpp:190 Acquire service-cfg for radarr when 0x0001 (done)
2021-04-08T18:37:23+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[28148]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:37:41+02:00 DS715 [27309.999681] init: pkgctl-radarr pre-start process (27887) terminated with status 1
2021-04-08T18:37:41+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[26178]: servicecfg_internal_lib.c:22 Failed to start job [pkgctl-radarr][0xD900 manager.cpp:204]
2021-04-08T18:37:42+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[26178]: service_initjob_action.c:27 InitJobStart failed, [0xD900 manager.cpp:204]
2021-04-08T18:37:42+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[26178]: pkgstartstop.cpp:376 Failed to start pkgctl-radarr (err=-1) [0xD900 manager.cpp:204]
2021-04-08T18:37:43+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[30462]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:37:45+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[30480]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:59:27+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[1768]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:59:42+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[3058]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T18:59:57+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[2195]: servicecfg_internal_lib.c:22 Failed to start job [pkgctl-radarr][0xD900 manager.cpp:204]
2021-04-08T18:59:57+02:00 DS715 [28646.533619] init: pkgctl-radarr pre-start process (2624) terminated with status 1
2021-04-08T18:59:58+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[2195]: service_initjob_action.c:27 InitJobStart failed, [0xD900 manager.cpp:204]
2021-04-08T18:59:58+02:00 DS715 synoscgi_SYNO.Core.Package.Control_1_start[2195]: pkgstartstop.cpp:376 Failed to start pkgctl-radarr (err=-1) [0xD900 manager.cpp:204]
2021-04-08T19:00:00+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[3937]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]
2021-04-08T19:00:03+02:00 DS715 synoscgi_SYNO.Core.Synohdpack_1_getHDIcon[4420]: SYNO.Core.Synohdpack.cpp:33 The image file does not exist. [/usr/syno/synoman/webman/3rdparty/CFE/images/edit{0}.png]

/var/log/synopkg.log`_

2021/04/08 18:37:15     install radarr 20210311-15 Begin /bin/mv -f /volume1/@tmp/pkginstall/conf /var/packages/radarr/conf
2021/04/08 18:37:15     install radarr 20210311-15 End /bin/mv -f /volume1/@tmp/pkginstall/conf /var/packages/radarr/conf ret=[0]
2021/04/08 18:37:16     install radarr 20210311-15 Begin postinst
2021/04/08 18:37:17     install radarr 20210311-15 End postinst ret=[0]
2021/04/08 18:37:17     install radarr 20210311-15 Begin /bin/rm -rf /volume1/@tmp/pkginstall
2021/04/08 18:37:17     install radarr 20210311-15 End /bin/rm -rf /volume1/@tmp/pkginstall ret=[0]
2021/04/08 18:37:17     install radarr 20210311-15 successfully
2021/04/08 18:37:20     install radarr: begin to start version 20210311-15
2021/04/08 18:37:20     install radarr 20210311-15 Begin pre-load apparmor
2021/04/08 18:37:20     install radarr 20210311-15 End pre-load apparmor ret=[0]
2021/04/08 18:37:20     install radarr 20210311-15 Begin start-stop-status start
2021/04/08 18:37:41     install radarr 20210311-15 End start-stop-status start ret=[1]
2021/04/08 18:37:41     (system) trigger radarr 20210311-15 Begin start-stop-status stop
2021/04/08 18:37:41     (system) trigger radarr 20210311-15 End start-stop-status stop ret=[0]
2021/04/08 18:37:41     (system) trigger radarr 20210311-15 Begin unload apparmor
2021/04/08 18:37:41     (system) trigger radarr 20210311-15 End unload apparmor ret=[0]
2021/04/08 18:37:42     stop radarr: begin to stop version 20210311-15
2021/04/08 18:37:42     stop radarr: stop version 20210311-15 successfully, result 0
2021/04/08 18:37:42     install radarr: start version 20210311-15 failed, result 272
2021/04/08 18:59:36     start radarr: begin to start version 20210311-15
2021/04/08 18:59:37     start radarr 20210311-15 Begin pre-load apparmor
2021/04/08 18:59:37     start radarr 20210311-15 End pre-load apparmor ret=[0]
2021/04/08 18:59:37     start radarr 20210311-15 Begin start-stop-status start
2021/04/08 18:59:57     start radarr 20210311-15 End start-stop-status start ret=[1]
2021/04/08 18:59:57     (system) trigger radarr 20210311-15 Begin start-stop-status stop
2021/04/08 18:59:57     (system) trigger radarr 20210311-15 End start-stop-status stop ret=[0]
2021/04/08 18:59:58     (system) trigger radarr 20210311-15 Begin unload apparmor
2021/04/08 18:59:58     (system) trigger radarr 20210311-15 End unload apparmor ret=[0]
2021/04/08 18:59:58     stop radarr: begin to stop version 20210311-15
2021/04/08 18:59:58     stop radarr: stop version 20210311-15 successfully, result 0
2021/04/08 18:59:58     start radarr: start version 20210311-15 failed, result 272

The text was updated successfully, but these errors were encountered:

publicarray · 2021-04-08T23:24:12Z

Hi Thanks for the detailed logs and report. Your radarr.log is very short

Can you run the radarr manually using following command and tell me what the output is?

sudo su -s /bin/sh sc-radarr -c "env HOME=/volume1/@appstore/radarr/var LD_LIBRARY_PATH=/volume1/@appstore/radarr/lib /volume1/@appstore/radarr/share/Radarr/bin/Radarr"

If you get Illegal instruction (core dumped) than your CPU is not supported by dotnet -> #4528 If this is the case can you provide us your CPU info? cat /proc/cpuinfo

Thanks

schumi2004 · 2021-04-10T21:39:53Z

Didn't had time yet, will test and provide information tomorrow

aderusha · 2021-04-11T15:04:03Z

I'm seeing the exact same behavior as the OP on a DS1817. Log entries look the same as well, specifically the result 272 error shown above in synopkg.log.

Executing the command suggested above outputs a single word Killed:

$ sudo su -s /bin/sh sc-radarr -c "env HOME=/volume1/@appstore/radarr/var LD_LIBRARY_PATH=/volume1/@appstore/radarr/lib /volume1/@appstore/radarr/share/Radarr/bin/Radarr"
Killed

$ cat /proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 1
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 2
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 3
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

Hardware        : AnnapurnaLabs Alpine (Device Tree)
Revision        : 0000
Serial          : 0000000000000000

publicarray · 2021-04-13T08:06:23Z

Thanks @aderusha Killed usually means the kernel killed the process for a reason, maybe resource starvation? How much free ram do you have? @ta264 what is the minimum memory requirement? Then again seeing how many devices (3) have a problem maybe not?

Can you run the command again and copy the last few lines from the dmesg output (these are the kernel logs)? Thanks

Edit: You can also test if it is resource exhaustion by stopping all packages and restarting the NAS and only starting Radarr.

ta264 · 2021-04-13T08:13:50Z

Radarr should need max 200mb to start. Normally it idles around 150 or so for me.

That CPU has neon so should be supported afaik.

schumi2004 · 2021-04-13T09:07:00Z

@publicarray

Did not had time to update (sorry) but here is at least the cpu info.
I suspect cpu is not supported?
Will upgrade later today and execute suggested command.

cat /proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.4GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 1
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.4GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 2
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.4GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 3
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.4GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

Hardware        : AnnapurnaLabs Alpine (Device Tree)
Revision        : 0000
Serial          : 0000000000000000

ta264 · 2021-04-13T09:17:49Z

That CPU ought to be supported I think. The package might need fixing, but it should be fixable I think.

aderusha · 2021-04-13T11:43:01Z

Thanks @aderusha Killed usually means the kernel killed the process for a reason, maybe resource starvation? How much free ram do you have?

$ free -m
              total        used        free      shared  buff/cache   available
Mem:           8173        1380         497         169        6295        6226
Swap:          2047           0        2047

Can you run the command again and copy the last few lines from the dmesg output (these are the kernel logs)? Thanks

I ran dmesg -w, executed that command, and no new output was generated.

edit: Hitting "RUN" in the UI results in the following dmesg log output:

 init: pkgctl-radarr pre-start process (19497) terminated with status 1

schumi2004 · 2021-04-15T07:15:43Z

@publicarray
Getting the same output as @aderusha

$ sudo su -s /bin/sh sc-radarr -c "env HOME=/volume1/@appstore/radarr/var LD_LIBRARY_PATH=/volume1/@appstore/radarr/lib /volume1/@appstore/radarr/share/Radarr/bin/Radarr"
Killed

Also for dmesg output

[390776.718910] init: iscsi_pluginserverd main process (6874) killed by TERM signal
[390776.730369] init: iscsi_pluginengined main process (6873) killed by TERM signal
[390776.765227] init: scsi_plugin_server main process (6880) killed by TERM signal
[598057.970895] init: pkgctl-radarr pre-start process (32739) terminated with status 1

publicarray · 2021-04-19T12:19:35Z

Thanks, So it's not your RAM. Honestly I was hoping to get more out of the logs. terminated with status 1 could mean a lot of things, for example the binary can't run on the system for some reason. Since it's .NET I don't know what it could be (I've got very little experience with it) @ta264 would you be willing to help again? I'm a bit puzzled what the pre-start process is. Is it the kernel looking for libraries to link? That could mean the included libstdc++ is wrong for this platform.

ta264 · 2021-04-19T12:53:07Z

Sure. Can you swing by the radarr discord channel when you have some free time to dig into it? https://radarr.video/discord

farfromrefug · 2021-04-26T13:05:20Z

I have a DS918+. Since the last update of Radarr it wont start on boot. Though in my case if i manually start it then it works.

schumi2004 · 2021-06-24T12:14:37Z

Can't seem to join Discord, issue is still present.

bennyryan · 2021-07-05T12:33:44Z

I seem to have the same issue and very similar logs.
Any ideas on a fix or work around?

publicarray · 2021-08-02T10:05:37Z

Hi and sorry for the silence, to learn more we would need a dump file. Can someone share theirs and share it in dotnet/runtime#56706?
They might be in /var/packages/radarr/target/app/ or /var/packages/radarr/var

farfromrefug · 2021-08-02T16:07:15Z

@publicarray i got no log there. /var/packages/radarr/target/app/ exists for only config and images there

schumi2004 · 2021-08-02T17:17:12Z

How do we generate this dump?

publicarray · 2021-08-03T01:02:04Z

Thanks @farfromrefug

Here is the process I used to get a dump from a running process: publicarray#28 (comment): I installed the .NET SDK https://github.com/publicarray/spksrc/releases/tag/dotnet-fix

@mangod9 how do you get a memory dump from a process that crashes at launch though?

SynoCommunity#4790 SynoCommunity#4546 #28 dotnet/runtime#56706

#4790 #4546 publicarray#28 dotnet/runtime#56706

AnonTester · 2021-08-26T23:55:08Z

@publicarray I don't understand what you mean with armadaxp being unsupported and/or marking it as unsupported. I'm running a recent Radarr dotnet core on my DS414 without any issues.

Radarr Details:

Version    4.0.0.5206
Package Version    armv7-6.1_20210311-15 by Team Radarr 
.NET    Yes (5.0.5)
DB Migration    196
AppData directory    /volume1/@appstore/radarr/var/.config/Radarr
Startup directory    /volume1/@appstore/radarr/share/Radarr/bin
Mode    Console

$ cat /proc/cpuinfo 
Processor	: Marvell PJ4Bv7 Processor rev 2 (v7l)
processor	: 0
BogoMIPS	: 1332.01

processor	: 1
BogoMIPS	: 1332.01

Features	: swp half thumb fastmult vfp edsp vfpv3 tls 
CPU implementer	: 0x56
CPU architecture: 7
CPU variant	: 0x2
CPU part	: 0x584
CPU revision	: 2

Hardware	: Marvell Armada XP Development Board
Revision	: 0000
Serial		: 0000000000000000

* Add Prowlarr * Remove legacy config from service setup * Fix uninstall wizard (remove hidden files as well) * Fix rm: refusing to remove '.' or '..' directory: skipping * service_clean_tmpdir: use find for removing files and log rm files * armadaxp and alpine may or may not work #4546 (comment) * Add cross/libstdc++ to fix some ARM architectures Co-authored-by: Sebastian Schmidt <publicarray@users.noreply.github.com>

mreid-tt · 2023-01-24T11:08:20Z

@schumi2004 @AnonTester @aderusha, I've been trying to solicit feedback to confirm compatibility with .NET builds of Radarr, Lidarr and Sonarr v4 running on ARMv7 architectures. If you have the time perhaps you can check out #5574 and add your feedback on the test packages I've shared. Appreciate the support.

mreid-tt · 2023-02-19T12:09:00Z

@schumi2004, a new version of Radarr (v20230215-19) has been published. This version includes Radarr 4.3.2.6857 and removes support for armada370 which is not dotnet 6 compatible as well as armv7 archs running under DSM 6 (as it does not have the required libraries).

In your original note you mentioned your setup was:

NAS Model: DS715 (Alpine)
DSM version: 6.2.4-25556

Based on this setup Radarr will not be compatible unless you upgrade to DSM 7.1. If this is not an option you can consider running one of the Servarr builds from https://github.com/Servarr/spksrc/releases which include a special wrapper for running dotnet apps on older architectures.

mreid-tt · 2023-03-27T11:14:28Z

@schumi2004, I wanted to follow up on your issue. Have you had a chance to try my suggested solution? Please let me know if it resolves the issue. If I don't hear back from you in the next few days, I'll assume the issue has been resolved and will close it.

schumi2004 · 2023-03-27T20:20:44Z

@mreid-tt I completely missed your previous message.
The issue is that I moved away from running packages on my DS715 but to help other people I will upgrade DSM to 7.1 and see if it runs.

/Edit
Upgraded to DSM 7.1 and updated Radarr but it didn't run, will try again tomorrow

mreid-tt · 2023-03-28T11:20:53Z

hey @schumi2004, thanks much for the update. This is indeed strange. If you can, I'd like you to SSH into your NAS and share with me the results of:

cat /etc.defaults/VERSION
cat /var/packages/radarr/INFO | grep -v package_icon
tail -n 100 /var/log/packages/radarr.log
ls -all /volume1/*.core.gz

I noted above you already shared your cpu info (#4546 (comment)) so I won't need that again.

I may have to update the results of my original testing based on the results.

EDIT: I have another issue with a similar processor (#5302) and you may be experiencing the same issue. Looking forward to the SSH output above to confirm.

mreid-tt · 2023-04-02T17:50:59Z

It seems that AnnapurnaLabs Alpine CPUs are not compatible with dotnet 6.0. They have been excluded from future builds of Radarr and other packages which use dotnet 6.0.

publicarray mentioned this issue Aug 2, 2021

Synology ARMv7 (Alpine AL-314 & Marvell Armada XP MV78230) Illegal instruction dotnet/runtime#56706

Open

publicarray added a commit to publicarray/spksrc that referenced this issue Aug 16, 2021

dotnet: mark armadaxp and alpine as unsupported

ec91b97

SynoCommunity#4790 SynoCommunity#4546 #28 dotnet/runtime#56706

publicarray mentioned this issue Aug 16, 2021

dotnet: mark armadaxp and alpine as unsupported #4793

Merged

3 tasks

publicarray added a commit that referenced this issue Aug 25, 2021

dotnet: mark armadaxp and alpine as unsupported (#4793)

26ea980

#4790 #4546 publicarray#28 dotnet/runtime#56706

AnonTester mentioned this issue Aug 26, 2021

[Package Request] Prowlarr #4780

Closed

publicarray mentioned this issue Aug 30, 2021

Revert "dotnet: mark armadaxp and alpine as unsupported" #4824

Merged

hgy59 added the dotnet Related to dotnet (core) label Aug 3, 2022

mreid-tt mentioned this issue Mar 29, 2023

Framework: Update dotnet 6.0 exclusions #5680

Merged

10 tasks

mreid-tt closed this as completed in #5680 Apr 2, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Radarr] Won't start on DS715 after upgrade to version 20210311-15 #4546

[Radarr] Won't start on DS715 after upgrade to version 20210311-15 #4546

schumi2004 commented Apr 8, 2021 •

edited

Loading

publicarray commented Apr 8, 2021

schumi2004 commented Apr 10, 2021

aderusha commented Apr 11, 2021

publicarray commented Apr 13, 2021 •

edited

Loading

ta264 commented Apr 13, 2021

schumi2004 commented Apr 13, 2021

ta264 commented Apr 13, 2021

aderusha commented Apr 13, 2021 •

edited

Loading

schumi2004 commented Apr 15, 2021

publicarray commented Apr 19, 2021 •

edited

Loading

ta264 commented Apr 19, 2021

farfromrefug commented Apr 26, 2021

schumi2004 commented Jun 24, 2021

bennyryan commented Jul 5, 2021

publicarray commented Aug 2, 2021

farfromrefug commented Aug 2, 2021

schumi2004 commented Aug 2, 2021

publicarray commented Aug 3, 2021 •

edited

Loading

AnonTester commented Aug 26, 2021

mreid-tt commented Jan 24, 2023

mreid-tt commented Feb 19, 2023

mreid-tt commented Mar 27, 2023

schumi2004 commented Mar 27, 2023 •

edited

Loading

mreid-tt commented Mar 28, 2023 •

edited

Loading

mreid-tt commented Apr 2, 2023

[Radarr] Won't start on DS715 after upgrade to version 20210311-15 #4546

[Radarr] Won't start on DS715 after upgrade to version 20210311-15 #4546

Comments

schumi2004 commented Apr 8, 2021 • edited Loading

Setup

Expected behavior

Actual behavior

Steps to reproduce

Package log

Other logs

publicarray commented Apr 8, 2021

schumi2004 commented Apr 10, 2021

aderusha commented Apr 11, 2021

publicarray commented Apr 13, 2021 • edited Loading

ta264 commented Apr 13, 2021

schumi2004 commented Apr 13, 2021

ta264 commented Apr 13, 2021

aderusha commented Apr 13, 2021 • edited Loading

schumi2004 commented Apr 15, 2021

publicarray commented Apr 19, 2021 • edited Loading

ta264 commented Apr 19, 2021

farfromrefug commented Apr 26, 2021

schumi2004 commented Jun 24, 2021

bennyryan commented Jul 5, 2021

publicarray commented Aug 2, 2021

farfromrefug commented Aug 2, 2021

schumi2004 commented Aug 2, 2021

publicarray commented Aug 3, 2021 • edited Loading

AnonTester commented Aug 26, 2021

mreid-tt commented Jan 24, 2023

mreid-tt commented Feb 19, 2023

mreid-tt commented Mar 27, 2023

schumi2004 commented Mar 27, 2023 • edited Loading

mreid-tt commented Mar 28, 2023 • edited Loading

mreid-tt commented Apr 2, 2023

schumi2004 commented Apr 8, 2021 •

edited

Loading

publicarray commented Apr 13, 2021 •

edited

Loading

aderusha commented Apr 13, 2021 •

edited

Loading

publicarray commented Apr 19, 2021 •

edited

Loading

publicarray commented Aug 3, 2021 •

edited

Loading

schumi2004 commented Mar 27, 2023 •

edited

Loading

mreid-tt commented Mar 28, 2023 •

edited

Loading