doc: Add guide to connect Laird Sentrius gateway

doc/content/gateways/laird-sentrius/_index.md

@@ -0,0 +1,57 @@
+---
+title: "Laird Sentrius™ RG1xx LoRaWAN Gateway"
+description: ""
+---
+
+The **Laird Sentrius™ RG1xx** is a secure, scalable, robust LoRaWAN-Enabled Gateway that supports Wi-Fi, Ethernet, and LTE backends.
+
+This page contains information about connecting the Laird Sentrius™ RG1xx to {{% tts %}}
+
+<!--more-->
+
+The technical specifications can be found in [Laird's official documentation](https://www.lairdconnect.com/wireless-modules/lorawan-solutions/sentrius-rg1xx-lorawan-gateway-wi-fi-ethernet-optional-lte-us-only#documentation). The Laird Sentrius™ RG1xx LoRaWAN Gateway supports two ways to connect with {{% tts %}}, using either the Semtech Packet Router or LoRa Basic Station.
+
+![Laird RG1xx](laird.png)
+
+## Requirements
+
+1. User account on {{% tts %}} with rights to create gateways.
+2. Laird Sentrius™ RG1xx LoRaWAN Gateway connected to the internet via ethernet or cellular.
+3. A computer, tablet or mobile phone connected to the network (to configure the gateway).
+
+## Registration
+
+Create a gateway by following the instructions for the [Console]({{< ref "/getting-started/console#create-gateway" >}}) or the [CLI]({{< ref "/getting-started/cli#create-gateway" >}}).
+
+The **EUI** of the gateway can be found on the configuration web page of the gateway as **Gateway ID**, or on the bottom label as **DevEUI**.
+
+{{< figure src="eui-small.png" alt="Gateway EUI" >}}
+
+## Configuration via Browser
+
+The Laird Sentrius™ RG1xx LoRaWAN Gateway features a Wi-Fi quick config that allows you to configure it without connecting via ethernet. To expose the Wi-Fi access point, do the following:
+
+1. Depress and hold the user button for 7 seconds.
+2. From a wirelessly enabled device perform a scan.
+3. Connect to the access point rg1xx29378B, where “29378B” are the last six digits of the Ethernet MAC address found on the label on the bottom of the gateway
+
+> The network is secured with WPA2 with a password that is the same as the SSID.  It is recommended that the default password is changed for security reasons.  The password can be changed on the **Wi-Fi > Advanced** web page.
+
+See [Laird's official documentation](https://www.lairdconnect.com/wireless-modules/lorawan-solutions/sentrius-rg1xx-lorawan-gateway-wi-fi-ethernet-optional-lte-us-only#documentation) for more information.
+
+### Login
+
+To log into the gateway web interface, follow these steps:
+
+1. Determine the last three bytes of your gateway’s Ethernet MAC address. This can be found on the label on the bottom of the gateway; the last three bytes are highlighted
+2. Enter the URL into the web browser to access the web interface. For example, for the gateway used in this guide, the URL is https://rg1xx29378B.local., where “29378B” are the last 6 digits of the Ethernet MAC address. In Wi-Fi quick config mode, the gateway can also be accessed via the IP address at https://192.168.1.1 
+3. Accept the self-signed security certificate in the browser.
+4. Log on using the following the default username **sentrius** and default password **RG1xx**
+
+{{< figure src="mac.png" alt="MAC" >}}
+
+{{< figure src="login.png" alt="Login" >}}
+
+## Configure the Packet Forwarder
+
+After completing basic configuration, follow the instructions for connecting using [{{% lbs %}}]({{< relref "lbs" >}}).

doc/content/gateways/laird-sentrius/lbs.md

@@ -0,0 +1,26 @@
+---
+title: "LoRa Basics™ Station"
+description: ""
+---
+
+This section contains instructions for connecting to {{% tts %}} using {{% lbs %}}.
+
+<!--more-->
+
+To set up LoRa packet forwarding on the gateway, follow these steps.
+
+Click the **LoRa** tab in the main menu.
+
+Click on the **Forwarder** tab.
+
+Choose **Semtech Basic Station** as the **Mode**.
+
+{{< figure src="../basic-station.png" alt="Create new server" >}}
+
+Follow the instructions for [Connecting LNS]({{< ref "/gateways/lora-basics-station/lns" >}}).
+
+If using CUPS, following the instructions for [Connecting CUPS]({{< ref "/gateways/lora-basics-station/cups" >}}).
+
+Click Update.
+
+If your configuration was successful, your gateway will connect to {{% tts %}} after a couple of seconds.