Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Flash tinkerboard image on tinkerboard s #34

Open
plchampigny opened this issue Jan 9, 2019 · 10 comments
Open

Flash tinkerboard image on tinkerboard s #34

plchampigny opened this issue Jan 9, 2019 · 10 comments

Comments

@plchampigny
Copy link

I've tried to flash a tinkerboard image (2.0.7) on a tinkerboard s. The image has been read using win32diskimager from a modified version of the tinkerboard (only apps have been installed). If I flash this image on the eMMC or on a sd card, the tinkerboard s does not boot (or at least doesnt send anything to the hdmi). If I flash that image on an sd card and put it in a 1st gen tinkerboard, it boots up properly.

Is there something I have to do to fix my image for tinkerboard s?

@jamess-huang
Copy link
Contributor

Hi,
Did you use the same peripheral between tinker and tinker S ? (HDMI, sdcard ... and so on)
If not, please use the same peripheral as tinker and try again.
If yes, may I know your adaptor SPEC ? 5V/2A or 5V/3A ?

@plchampigny
Copy link
Author

I do believe that my AC adapter is a 2.5A/5V. I'll check tomorrow at work. Meanwhile I can tell you I plugged the same sd card that is working on a tinkerboard on a tinkerboard s and I used the same ac, hdmi, etc and its not working.

@jamess-huang
Copy link
Contributor

jamess-huang commented Jan 10, 2019

When the tinker S is un-boot, may I know the 3 LEDs status ? Is the red LED on and is the yellow LED blinking ?

@krystofurr
Copy link

krystofurr commented Jan 24, 2019

I purchased a 1st gen Tinkerboard recently and tried to use the v2.07 image ( also tried 2.08 ). Got a similiar result. No boot. Black screen using HDMI connection. I only have a red LED on myself.

@jamess-huang
Copy link
Contributor

Hi, krystofurr
Can you see the yellow LED blink sometimes ?

@krystofurr
Copy link

Yes, occassionally they do. I tried v1.8 and it seems to work fine. Funny that the main website doesn't have the latest version for download. I downloaded the image from here. https://www.asus.com/ca-en/Single-Board-Computer/Tinker-Board/

@jamess-huang
Copy link
Contributor

Hi, krystofurr
The case you met is difference from plchampigny's. Yours is a HDMI compatibility issue. May I know your HDMI model name ?

@krystofurr
Copy link

I'll try to find the exact models. The first was a 32 inch Sony bravia lcd tv ( works fine with an rpi 3 and v1. 8 of the os). The second was a 50 inch insignia led tv (Also works with rpi 3 and v1. 8 of the os). When it did come up with 1.8 though the resolution is very off and if u disconnect / reconnect the HDMI it fixes a little. Also there is a high static noise that is constant. This only happens with the sony bravia

@krystofurr
Copy link

Got them.

Sony Bravia KDL-32ML130
Insignia NS-50L260A13

@jamess-huang
Copy link
Contributor

Hi, krystofurr
Have you tried the below method with v2.0.8 image ?
https://tinkerboarding.co.uk/wiki/index.php?title=HDMI-resolution

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants