Errors with install of RPi.GPIO on Bullseye (if Rpi.GPIO 0.7.1 pre installed) Possible workaround until fix found. #74
Comments
|
The only way I could make this work was to do the following: I'm not sure if this is the right way to do it or if there is a better way but it worked for me. I'm interested in feedback. |
|
Thank you for this information. I think the best way forward will be to move the install of rpi-gpio to the actual apt version from the RaspberryPi. I am going to test this. I was pinning the old version of Rpi.GPIO to hcsr04sensor because that library has stopped supporting Raspbian Stretch which itself is still supported. Had you installed RPi.GPIO 0.7.1 originally with pip? Or was it on the image? Are you using Raspberry OS light version of the full desktop version? I need to do a fresh install of Raspberry OS and see if I can replicate this issue. |
alaudet
changed the title
|
Also your workaround looks sound, I really appreciate you including that. |
|
ok, just tested this and Bullseye comes packaged with Rpi.GPIO 0.7.0 which is why it did not fail for me. I uninstalled everything (raspisump, hcsr04sensor and Rpi.GPIO 0.7.0 and installed version 0.7.1 with Pip. I then reinstalled Raspisump with my instructions and reproduced the error. So my question is stil if you had manually installed Rpi.GPIO 0.7.1 manually with pip before hand, replacing the packaged version. Because my install of Raspberry Pi OS (light version) comes bundled with 0.7.0 originally. |
alaudet
changed the title
|
If the apt package of rpi.gpio is installed first and then you go to install it with pip "on top" of that, you get the following error: If you override that with this: sudo pip3 install rpi.gpio --no-deps, it will install. However when you go to install raspisump with sudo pip3 install --no-binary :all: raspisump, the install will fail with the original error that I reported. It appears that it does this because rpi.gpio version 0.7.1 is actually uninstalled in the process as you can see below (output truncated for brevity). sudo pip3 install --no-binary :all: raspisump The Raspian / Raspberry Pi OS that I have has been upgraded several times over the years. So it's not a match to what you get out of the box. That said, I think it was still close enough because it did have rpi.gpio from the apt package. It feels weird to me to have a pip package installed "on top of" the apt package. I'm worried about future fighting between the packages. However it also feels weird ignoring dependencies in pip :) ¯_(ツ)_/¯ . |
|
This is what I have reproduced as well. I think I am going to remove the pip install requires in setup.py for Rpi.GPIO in the hcsr04sensor module, and just add install instructions for installing it with apt instead. I already do this with matplotlib because pip was a nightmare for that. It causes problems when new versions of Raspberry Pi OS are released. On top of that non wheels installs for Rpi.GPIO just crash alltogether. Right now my instructions work for fresh installs of Raspberry Pi OS. But I think the following would take care of it alltogether. First I remove the requirement for Rpi.GPIO in hcsr04sensor. If anyone needs to use the library I can tell then to install Rpi.GPIO first change install instructions to;
This will install raspisump and the hcsr04sensor with no problem and will address everyones use case. I need a better way to distribute this software. |
|
At least in my case the current version of python3-rpi.gpio listed in the default repo is 0.7.0-0.2+b1 and I think we need 0.7.1 for this to work properly. And yeah, I'd love to see this all in an apt package. That seems like the cleanest mechanism given that the appropriate versions are out there. |
|
works with 0.7.0-0.2+b1 I have a lot of work to do before releasing it as an apt package. Maybe version 2.0 if ever. I just dont have much time to devote to this project which basically does what I need it to do. |
|
Oh ok - mine wouldn't work unless I was 0.7.1 but maybe I had something else going on as well. And sorry - that wasn't meant to be passive aggressive. I'd actually like to help with getting it in an apt package. But I suspect I have about as much time to devote to it as you. And it does what I need it to right now as well . :) |
|
Oh I didn't take it that way at all. I appreciate you having taken the time to report it. Just to say apt was on my radar but my project structure would have to be entirely overhauled. |
|
Change made Raspisump no longer pinned to a specific version of hcsr04sensor. Instructions now specifically recommend installing the apt version of RPi.GPIO 0.7.0 There are also instructions for Bullseye uses who prefer RPi.GPIO 0.7.1 to install it via Pip. Both versions work fine on the Bullseye. |
When I run sudo pip3 install --no-binary :all: raspisump I get the error shown below. What am I doing wrong?
sudo pip3 install --no-binary :all: raspisump
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting raspisump
Using cached raspisump-1.4.tar.gz (73 kB)
Collecting hcsr04sensor>=1.6
Using cached hcsr04sensor-1.6.2.tar.gz (7.3 kB)
Collecting RPi.GPIO==0.7.0
Using cached RPi.GPIO-0.7.0.tar.gz (30 kB)
Skipping wheel build for raspisump, due to binaries being disabled for it.
Skipping wheel build for hcsr04sensor, due to binaries being disabled for it.
Skipping wheel build for RPi.GPIO, due to binaries being disabled for it.
Installing collected packages: RPi.GPIO, hcsr04sensor, raspisump
Attempting uninstall: RPi.GPIO
Found existing installation: RPi.GPIO 0.7.1
Uninstalling RPi.GPIO-0.7.1:
Successfully uninstalled RPi.GPIO-0.7.1
Running setup.py install for RPi.GPIO ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/setup.py'"'"'; file='"'"'/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-_ie3tjbg/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.9/RPi.GPIO
cwd: /tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/
Complete output (87 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-armv7l-3.9
creating build/lib.linux-armv7l-3.9/RPi
copying RPi/init.py -> build/lib.linux-armv7l-3.9/RPi
creating build/lib.linux-armv7l-3.9/RPi/GPIO
copying RPi/GPIO/init.py -> build/lib.linux-armv7l-3.9/RPi/GPIO
running build_ext
building 'RPi._GPIO' extension
creating build/temp.linux-armv7l-3.9
creating build/temp.linux-armv7l-3.9/source
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/c_gpio.c -o build/temp.linux-armv7l-3.9/source/c_gpio.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/common.c -o build/temp.linux-armv7l-3.9/source/common.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/constants.c -o build/temp.linux-armv7l-3.9/source/constants.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/cpuinfo.c -o build/temp.linux-armv7l-3.9/source/cpuinfo.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/event_gpio.c -o build/temp.linux-armv7l-3.9/source/event_gpio.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/py_gpio.c -o build/temp.linux-armv7l-3.9/source/py_gpio.o
source/py_gpio.c: In function ‘PyInit__GPIO’:
source/py_gpio.c:1046:4: warning: ‘PyEval_ThreadsInitialized’ is deprecated [-Wdeprecated-declarations]
1046 | if (!PyEval_ThreadsInitialized())
| ^~
In file included from /usr/include/python3.9/Python.h:145,
from source/py_gpio.c:23:
/usr/include/python3.9/ceval.h:129:36: note: declared here
129 | Py_DEPRECATED(3.9) PyAPI_FUNC(int) PyEval_ThreadsInitialized(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
source/py_gpio.c:1047:7: warning: ‘PyEval_InitThreads’ is deprecated [-Wdeprecated-declarations]
1047 | PyEval_InitThreads();
| ^~~~~~~~~~~~~~~~~~
In file included from /usr/include/python3.9/Python.h:145,
from source/py_gpio.c:23:
/usr/include/python3.9/ceval.h:130:37: note: declared here
130 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
| ^~~~~~~~~~~~~~~~~~
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/py_pwm.c -o build/temp.linux-armv7l-3.9/source/py_pwm.o
arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c source/soft_pwm.c -o build/temp.linux-armv7l-3.9/source/soft_pwm.o
arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -g -fwrapv -O2 -Wl,-z,relro -g -fwrapv -O2 -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 build/temp.linux-armv7l-3.9/source/c_gpio.o build/temp.linux-armv7l-3.9/source/common.o build/temp.linux-armv7l-3.9/source/constants.o build/temp.linux-armv7l-3.9/source/cpuinfo.o build/temp.linux-armv7l-3.9/source/event_gpio.o build/temp.linux-armv7l-3.9/source/py_gpio.o build/temp.linux-armv7l-3.9/source/py_pwm.o build/temp.linux-armv7l-3.9/source/soft_pwm.o -o build/lib.linux-armv7l-3.9/RPi/_GPIO.cpython-39-arm-linux-gnueabihf.so
/usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: multiple definition of
module_setup'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: multiple definition ofsetup_error'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: multiple definition of
rpiinfo'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: multiple definition ofgpio_direction'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: multiple definition of
pin_to_gpio'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: multiple definition ofpin_to_gpio_rev3'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: multiple definition of
pin_to_gpio_rev2'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: multiple definition ofpin_to_gpio_rev1'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: multiple definition of
gpio_mode'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: multiple definition ofgpio_mode'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: multiple definition of
setup_error'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: multiple definition ofrpiinfo'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: multiple definition of
gpio_direction'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: multiple definition ofmodule_setup'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: multiple definition of
pin_to_gpio'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: multiple definition ofpin_to_gpio_rev3'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: multiple definition of
pin_to_gpio_rev1'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: multiple definition ofpin_to_gpio_rev2'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:42: multiple definition of
both_edge'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:42: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:41: multiple definition offalling_edge'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:41: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:40: multiple definition of
rising_edge'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:40: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:39: multiple definition ofpud_down'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:39: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:38: multiple definition of
pud_up'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:38: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:37: multiple definition ofpud_off'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:37: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:36: multiple definition of
bcm'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:36: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:35: multiple definition ofboard'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:35: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:34: multiple definition of
unknown'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:34: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:33: multiple definition ofspi'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:33: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:32: multiple definition of
i2c'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:32: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:31: multiple definition ofserial'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:31: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:30: multiple definition of
pwm'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:30: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:29: multiple definition ofoutput'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:29: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:28: multiple definition of
input'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:28: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:27: multiple definition oflow'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:27: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:26: multiple definition of
high'; build/temp.linux-armv7l-3.9/source/constants.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/constants.h:26: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: multiple definition ofgpio_direction'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:38: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/py_pwm.h:23: multiple definition of
PWMType'; build/temp.linux-armv7l-3.9/source/py_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/py_pwm.h:23: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: multiple definition ofmodule_setup'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:41: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: multiple definition of
setup_error'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:40: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: multiple definition ofrpiinfo'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:39: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: multiple definition of
pin_to_gpio'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:37: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: multiple definition ofpin_to_gpio_rev3'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:36: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: multiple definition of
pin_to_gpio_rev2'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:35: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: multiple definition ofpin_to_gpio_rev1'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:34: first defined here/usr/bin/ld: build/temp.linux-armv7l-3.9/source/py_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: multiple definition of
gpio_mode'; build/temp.linux-armv7l-3.9/source/common.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/common.h:33: first defined here /usr/bin/ld: build/temp.linux-armv7l-3.9/source/soft_pwm.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/soft_pwm.c:28: multiple definition ofthreads'; build/temp.linux-armv7l-3.9/source/event_gpio.o:/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/source/event_gpio.c:60: first defined herecollect2: error: ld returned 1 exit status
error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
----------------------------------------
Rolling back uninstall of RPi.GPIO
Moving to /usr/local/lib/python3.9/dist-packages/RPi.GPIO-0.7.1.dist-info/
from /usr/local/lib/python3.9/dist-packages/~Pi.GPIO-0.7.1.dist-info
Moving to /usr/local/lib/python3.9/dist-packages/RPi/
from /usr/local/lib/python3.9/dist-packages/~Pi
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/setup.py'"'"'; file='"'"'/tmp/pip-install-787no5_l/rpi-gpio_c0ddf0a71e7b44a690a1a53f7bd7c433/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-_ie3tjbg/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.9/RPi.GPIO Check the logs for full command output.
The text was updated successfully, but these errors were encountered: